R4X
-
BASE BOLT WITH WASHER
Part No. PD20526
$8.13- Used on various Robot Coupe models such as R4X and where part is applicable.
-
BLADE, REPLACEMENT ONLY, 1.5 mm
Part No. PD2595810
$44.33- Blade only
- 1.5 mm
- Size-3/16" Slice
- For slicing plates from 1mm to 19mm
- Curved edge, smooth (not waved)
- Some plates require 2 blades
- Always replace both blades on 2 blade plates to help keep balance and reduce stress on unit.
- Used on various Robot Coupe models such as CL 50, CL 50-D, CL 52, CL 52-D, CL 60-D, CL-50, CL-52, R4N, R4X, R6N, R6VN-D, R6X and where part is applicable.
-
-
Circuit Breaker/R4X/10A
Part No. PD137077
$53.80- Commonly used on Robot Coupe models: R300 Series B, R300C Series B, R4X, R4X Series A, R4X Series D, R6X, R6X Series A, R6X Series D and R300B Series B
-
Continuous Feed Kit
Part No. PD162696
$1,272.67- Continues Feed Kit
- Commonly used on Robot Coupe models such as R4N Series D, R4C Series D and R4X Series D and where part is applicable.
-
CONTINUOUS LEAD LEAD
Part No. PD38069
$985.53- For R4N & R4X Series D only
- Includes continuous lead lid, locking pin assembly, locking collar, pin for latch, hinge pin bushing.
-
CORD SET
Part No. PD42166
$25.93- Cord Set
- Commonly used on Robot models such as Blixer 3, Blixer 5V, Blixer 6V, R302V, R4X, R4Y, R502X, R602V, R602V E, R602Y, R6V, R6VN, R6X, R6Y and where part is applicable.
-
DISCHARGE PLATE (K)
Part No. PD3209710
$44.14- Discharge Plate
- 7-5/16" Outer Diameter
- 3/4" Inner Diameter
- Black
- Commonly used on various Robot Coupe models such as CL-50 Series D, CL-52D , CL-55D, CL-60 Series D, R502E, R502X ,CL-50, CL50, CL50E, CL52, CL55, CL60, R4N, R4X, R6N, R6VN, R6X, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL-52, CL-55, CL-60, CL-60E, CL-60E V.V., R4N, R4X, R502E, R502X, R602E, R6V and only where part is applicable.
- NOTE: Please provide serial number of unit to insure part is correct.
-
DISCHARGE SLING PLATE
Part No. PD16372
$36.98- Discharge Plate
- Unit has oblong center hole
- 7-1/16" Diameter
- Not for R4X or R4N Series D, CL50 E, CL50 D
- Used on various Robot Coupe models such as R4X or R4N Series A, CL50 Series B, CL50 Series A, CL55 Pusher, CL55 Bulk, CL60 Pusher, CL60 Bulk and where part is applicable.
-
FOOT FOR BASE
Part No. PD27526
$8.25- Foot
- Rubber
- Length 1 Inch
- Width 1 Inch
- Height 1.25 Inch
- Used on various Robot Coupe models such as Blixer 5V, Blixer 6V, R4N, R4X, R4Y, R6N, R6VN, R6X, R6Y ,R602, R4, R4N SERIES D, R6, R6V, R6VN and only where part is applicable.
Best practice is to change all 4 to ensure proper balance and safety of machine. This will also maintain the air movement needed under the machine. This preservers safety of the motor (around 500.00 +) from overheating and failing.
-
-
MOTOR, LOW PROFILE FOR PLASTIC BASE
Part No. PD20458
$626.49- Motor
- Low Profile
- Commonly used on various Robot Coupe models such as R4X, R6X and where part is applicable.
-
Run Capacitor R4X
Part No. PD137076
$113.21- Commonly used on Robot Coupe models: R4X, R4X Series A, R4X Series D, R6X, R6X Series A and R6X Series D
-
Start Capacitor R4X Mtr
Part No. PD137074
$39.65- Commonly used on Robot Coupe models: R4X, R4X Series A, R4X Series D, R6X, R6X Series A and R6X Series D
-
STRAIN RELIEF
Part No. PD50033
$24.28- Strain Relief
- Used on various Robot Coupe models such as: Blixer 5V, Blixer 6V, R302, R302V, R4N, R4X, R4Y, R502E, R502X, R502Y, R602E, R602V E, R602Y, R6N, R6VN, R6X, R6Y, R8, R8U.
-
TOGGLE SWITCH
Part No. PD3514210
$49.40- Used on various Robot Coupe models such as R4S, R4X, and where part is applicable.