R301 Ultra Series C

44 Part(s)

Set Descending Direction
per page
  1. BASE W/LARGE FOOT

    Part No. PD37824

    $63.83
    • Base with large foot
    • Commonly used on various Robot Coupe models such as R 301 Ultra, WDG250, WDG250C, WFG250, WFG250C, WPG250, WPG250C, R300, R300 Series B, R301U old style, R301U Series B/C and only where part is applicable.
  2. Blade, S, Fine Serrated

    Part No. PD39212

    $164.18
    • S Blade
    • Fine serrated
    • Used on units with SIX side shaft.
    • Use with cutting bowl only
    • Used on various Robot Coupe models, such as: R300, R301, R301 Ultra and where part is applicable.

    NOTE: Not for R301 Series D or R301 Ultra Series D.

  3. Bottom Cushion Bushing

    Part No. PD162762

    $39.04
    • Absorber
    • Bottom cushion bushing
    • Commonly used on Robot Coupe models: Blixer 2, Blixer 3B, Blixer 3D, Blixer 4, Blixer 4A, R100, R100 PLUS, R100B, R100BCLR, R101, R101 PLUS CB, R101B, R2 Ultra Dice, R2DICE, R300, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, R401, R401A.
  4. BOWL LID (NEW STYLE) W/MAGNET

    Part No. PD1947710

    $82.52
    • Cutter Bowl Lid
    • New Style Lid
    • 7 5/8" Outer Diameter
    • 2 3/8" Depth
    • Plastic
    • Clear
    • With magnet
    • Commonly used on Robot Coupe models such as R172, R300, R301U, R301 Series C & Older, R302, R302V and only where part is applicable.
  5. Button Block Retainer R300,R301U "C" (C)

    Part No. PD163316

    $8.70
    (C) Button Block Retainer R300,R301U "C"
  6. CAP & SEAL

    Part No. PD2949110

    $7.83
    • For "S" blades in model R2 series except R2Dice, R300, R301
  7. CONTINUOUS FEED ATTACHMENT - NEW STYLE

    Part No. PD38067

    $471.08
    • Continuous Feed Attachment
    • (Old style lead lids will not fit on this, old style serial # 91/xxxx on machine)
    • For complete continuous lead kit to replace old style lead order part #PD2845610
    • Used on various Robot Coupe models such as: R301 Ultra C series, R300, R301 ULTRA and where part is applicable.
    • Not for R302 series units
  8. CONTINUOUS FEED KIT - NEW STYLE

    Part No. PD2845610

    $839.38
    • Continuous Feed Kit Assembly
    • Includes:
      • Continuous feed lead (chute)
      • Continuous lead lid with pushers
      • Discharge plate
    • 13-3/4 x 11-1/4" x 11-3/4"
    • Commonly used on Robot Coupe models such as R300, R301 Ultra C Series B & C, R301 Series B & C and where part is applicable.   
    • Replaces continuous feed kits for units with serial numbers 91/xxxx
  9. CONTINUOUS FEED LEAD ONLY (LID)

    Part No. PD50078

    $155.34
    • Continuous feed lead only (lid)
    • Used on various Robot Coupe models: R300 and Series B s/n FP002243, R300 Series C s/n 258xxxxx03, R301 Ultra Series A s/n 91/xxxx, B s/n 109/xxxxxx and up, C s/n 259xxxxx03 and where part is applicable.
  10. CONTINUOUS LEAD KIT COMPLETE ASSEMBLY

    Part No. PD38068

    $428.14
    • Complete Continuous Lead Feed Assembly
    • New style
    • (chute attachment, lid)
    • Kit includes continuous lead lid, small and large pusher, large pusher bracket with knob
    • Commonly used on Robot Coupe models: R300, R301 Ultra C, Series B, C, R301 Ultra Series A, B, C
  11. CONTROL BOARD

    Part No. PD32655

    $228.69
    • Control board
    • Used on Robot Coupe Series C models: 301U, R301UC, R301UB
  12. Control Board Retaining Pin (K)

    Part No. PD163142

    $4.41
    (K)Control Board Retaining Pin
  13. CUTTER BOWL S/S

    Part No. PD19474

    $666.74
    • Stainless Steel Bowl Only
    • 3.5 Qt
    • Use on Robot Coupe models such as: R301 Ultra, R302 and where part is applicable
  14. Data Plate R301U "C"

    Part No. PD162872

    $31.36
    Data Plate R301U "C"
  15. DEFLECTER WASHER SS

    Part No. PD38588

    $34.95
    • Deflector Washer
    • Stainless Steel
    • Commonly used on Robot Coupe models Blixer 3, 3B, R300, R301, R301 Ulltra and where part is applicable.
  16. DISC-PLATE STORAGE RACK

    Part No. PD1942050

    $32.50
    • Storage Rack
    • Metal
    • Epoxy coating
    • Holds up to 8 food processor discs
    • 4 1/2" x 13 1/4" x 2 1/2"
    • Prevent blades from hitting each other while in a storage drawer. Protects blade edge.
    • Prevent employees from cutting themselves when handling these sharp blades.
    • Used on various Robot Coupe models such as CL 30, CL 50, CL 55 Pusher, CL 60 Bulk, CL 60 Pusher, Food Processor, R 100, R 100 Plus, R 300, R 301 Ultra, R100, R100 PLUS, R101, R101 Plus CB, R2 Ultra Dice, R2N, R2N Ultra, R2N-ULTRA, R301 ULTRA, R301 Ultra Dice, R301U, R302, R302V, R4, R401A, R402 V. A, R402A, R4N, R4N SERIES D, R4X, R6, R602, R602E, R6N, R6V, R6VN, R6VN-D, R6X and only where part is applicable.
  17. DISCHARGE PLATE (for sq. lead design)

    Part No. PD19491

    $64.26
    • Discharge Plate
    • For units with square lead lid only.
    • Used on various Robot Coupe models such as R300, R301U and only where part is applicable.
    • If your unit has the old style round feed lid, you need part number PD1948450
  18. Fan Blade Only

    Part No. PD41434

    $26.98
    • Commonly used on Robot Coupe models: R100, CL30, CL50, R300 Series B
  19. FOOT, BLACK, RUBBER

    Part No. PD19453

    $7.65
    • Rubber foot
    • 1-1/4" Outer Diameter
    • Black
    • Used on various Robot Coupe models such as Blixer 3, Blixer 3B, Blixer 4, Blixer 4 Mono, Blixer 4 Tri, Blixer 4 V.V., CL 30-A, CL-30, R 2 Dicing, R 2 Ultra Dicing, R 300, R 301, R 301 Ultra, R 401, R2, R2 Dice, R2 Dicing, R2 Dicing Ultra, R2N, R3-1500, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, R401, R401A, R402, R402A, R402 V.V. and only where part is applicable.
    Strongly advisable to replace all 4 at the same time to protect balance. You do not want your unit to wobble!
  20. Grill

    Part No. PD162062

    $19.89
    • Commonly used on Robot Coupe models: R300, R300 Series B, R300 Series C, R301 Ultra, R301 Ultra Series B, R301 Ultra Series C, R300 C, R300C Series B, R300C Series C, R301 Ultra C, R301 Ultra C Series B, R301 Ultra C Series C, R300B, R300B Series
  21. Juicer Cone

    Part No. PD162169

    $60.62
    • Juicer Cone
    • Commonly used on Robot Coupe models: R300 Series C, R301 Ultra Series C, R302, R302V, R300B Series C, R301 Ultra B Series C, R302B and R302VB
  22. Juicer Kit

    Part No. PD162188

    $221.50
    • Juicer Kit
    • Commonly used on Robot Coupe models: R301 Ultra Series C, R302, R302V, R301 Ultra B Series C, R302B and R302VB
  23. LARGE PUSHER ASSEMBLY

    Part No. PD3668410

    $146.60
    • Large Pusher Assembly
    • Includes Pusher & Knob
    • For new style continuous feed lid kit
    • Commonly used on Robot Coupe models such as R301, R301 Ultra, R301 Series D and where part is applicable 
  24. Large Pusher Rod Only R300, R301U (C)

    Part No. PD163317

    $142.57
    • Large Pusher Rod only
    • Metal shaft
    • Black head
    • Commonly used on Robot Coupe models: R300, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, 301U Series C and where part is applicable.
  25. MOTOR EXTENSION SHAFT

    Part No. PD32503

    $82.82
    • Motor Shaft Extension
    • Metal w/washer
    • Commonly used on various Robot Coupe models such as R300, R301 Ultra and where part is applicable. 
  26. Motor Relay, 16/39 MTRP

    Part No. PD29844

    $75.94
    • Motor Relay
    • MTRP
    • 2 3/16" Height
    • Commonly used on Robot Coupe models such as Blixer 2, CL-30, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL-52, J80 Ultra, R100, R100 PLUS, R100B, R100BCLR, R101, R101 PLUS CB, R101B, R300, R301, R301 ULTRA, R402A, CL-55 and only where part is applicable.
  27. MOTOR SUPPORT KIT

    Part No. PD3534310

    $215.77
    • Motor Support Kit
      • motor support, 3 hole
      • front panel
      • screw caps
    • Used on various Robot Coupe models such as R 301 Ultra, R301 ULTRA and only where part is applicable.
  28. MOTOR SUPPORT SCREW SET

    Part No. PD38322

    $27.14
    • Use on various Robot Coupe models such as R301U
  29. MOTOR SUPPORT SEAL

    Part No. PD27258

    $15.58
    • Recommended to replace both seals (they are the same) instead of just one
    • Used on Various Robot Coupe Models Such As Blixer 3, R300
  30. MOTOR, 301U SERIES C

    Part No. PD3689310

    $548.22
    • French made motor, fan on the bottom of motor
    • 120V
    • Commonly used on Robot Coupe models: R301U
  31. PC Board Supp. R300,R301U Series "C" (C)

    Part No. PD163315

    $15.98
    PC Board Supp. R300,R301U Series "C" (C)
  32. POWER CORD R300/301U

    Part No. PD3401010

    $39.39
    • Used on various Robot Coupe models such as: R300, R301U, and where part is applicable
  33. PUSHER GUIDE

    Part No. PD3668310

    $115.42
    • Commonly used on Robot Coupe models: R301 U Series C
  34. PUSHER KNOB, ROBOT COUPE, 117452S

    Part No. PD26507

    $23.06
    • Handle, Pusher
    • Black
    • Plastic
    • Commonly used on various Robot Coupe models such as CL-30, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, R300, R301, R301 Dice, R301 ULTRA, R301 Ultra dice, R302, R302V, R401, R401A, R402, R402 V. A, R402 V.V., R402A, R502E, R502X, R602E, R6N, R6V, R6VN, R6X and only where part is applicable.
  35. Pusher, Small (L)

    Part No. PD28502

    $26.26
    • Small round Pusher
    • Length is 6 3/4" inches.
    • Outer Diameter 2 5/8" Inches
    • Inner Diameter 2" Inches
    • Gray
    • Plastic
    • Commonly used on various Robot Coupe models such as CL52, CL50D, CL50E, R300, R301, R301 Dice, R301 ULTRA, R301 ULTRA Series C, R301 Ultra Dice, R6N, R6VN, R6X.
    • Does not fit R6N, R6VN & R6X Series A machines and only where part is applicable.
  36. Reed Switch, R300,R301U Series "C"

    Part No. PD163296

    $38.22
    • Reed Switch
    • Used on various Robot Coupe models such as: BX 4, R300, R301, R301 Ultra (Series C) and where part is applicable.
  37. S Blade, Coarse Serrated

    Part No. PD3524510

    $164.18
    • S Blade
    • Course serrated
    • Used on units with six side shaft.
    • Use with cutting bowl only
    • Used on various Robot Coupe models such as R300, R301, R301 Ultra and only where part is applicable.

    NOTE: Not for R301 Series D or R301 Ultra Series D.

  38. S BLADE, SMOOTH EDGE, HEX SHAFT *

    Part No. PD1947510

    $87.44
    • S Blade
    • 7" Width
    • 2 11/16" Depth
    • Smooth edge
    • Used on units with six sided HEX shaft.
    • Use with cutting bowl only
    • Used on various Robot Coupe models such as R172, R300, R301, R301 Ultra and only where part is applicable.
    • Not for R301 Series D or R301 Ultra Series D.
    • Not for Old Style model R-300
  39. Screen R300, R301U Series C (C)

    Part No. PD163139

    $21.87
    • Commonly used on Robot Coupe models: R301U
    • Please verify serial number when ordering
  40. Screw Cover Disc

    Part No. PD162156

    $5.22
    • Black Disc Screw Cover
    • 1" diameter
    • These pieces usually get destroyed when removing to get to the screws that mount the motor to the motor support.
    • Not recommended to re-use the ones removed because liquids could get down to the motor area
    • Commonly used on Robot Coupe model R301 Ultra and where part is applicable.
  41. SIDE BRACKETS, (PKG 2)

    Part No. PD25709

    $49.72
    • Locking Bush Set W/Screws
    • Commonly used on Robot Coupe models: Blixer 3, Blixer 4, BX3 CL30, R301Ultra Series, R302, R402V
  42. Spacer R300, R301U Series C

    Part No. PD163138

    $7.65
    • Commonly used on Robot Coupe models: R301 Ultra Series C
  43. Strain Relief

    Part No. PD162249

    $8.25
    • Used on various Robot Coupe models such as: R2 (Old Style), R300, R300 Series B, R300 Series C, R301 Ultra, R301 Ultra Series B, R301 Ultra Series C, R4, R6 Series (R6N, R6B, R6C), R6V Series (R6VN, R6VB, R6VC), R2C (old style), R300 C, R300C Series B, R
  44. Switch Panel Assembly R301U Series C (C)

    Part No. PD163281

    $244.04
    • Switch Assembly
    • Includes front panel
    • Used on Robot Coupe model R301 Ultra Series C and where part is applicable.

44 Part(s)

Set Descending Direction
per page