R100 PLUS

36 Part(s)

Set Descending Direction
per page
  1. Base, R100 Gray (A)

    Part No. PD162500

    $218.98
    • Commonly used on Robot Coupe models: R100 Plus
  2. BEARING LOWER, MOTOR

    Part No. PD19361

    $27.74
    • Motor bearing
    • lower
    • Commonly used on various Robot Coupe models such as Blixer 2, Blixer 3D, Blixer 4A, CL 50, CL 50 Gourmet, CL 50 Ultra, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL50E, R 300, R 301, R 301 Ultra, R100, R100 PLUS, R100B, R100BCLR, R101, R101 Plus CB, R101B, R3-1500, R301, R301 ULTRA, R301U, R401A and where part is applicable.
  3. Bottom Cushion Bushing

    Part No. PD162762

    $39.04
    • Absorber
    • Bottom cushion bushing
    • Commonly used on Robot Coupe models: Blixer 2, Blixer 3B, Blixer 3D, Blixer 4, Blixer 4A, R100, R100 PLUS, R100B, R100BCLR, R101, R101 PLUS CB, R101B, R2 Ultra Dice, R2DICE, R300, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, R401, R401A.
  4. BOWL LID W/PUSHER CHUTES

    Part No. PD2151510

    $175.55
    • Bowl Lid
    • with Pusher Chutes
    • (pushers not included)
    • Commonly used on Robot Coupe models such as R 100 Plus, R100 PLUS, R101, R101 Plus CB, CL-50 Gourmet, CL-50 Ultra E, CL-50E, R100 PLUS, R101, R101 PLUS CB and only where part is applicable.
  5. BOWL, 2.5 QT, (CLEAR)

    Part No. PD3401850

    $114.35
    • Clear Bowl
    • Plastic
    • 2.5 qt
    • Use for mixing and cutting
    • Comes with on-off pin assembly
    • Commonly used on various Robot Coupe models such as R100, R100 Plus, R100B, R101, R101B, R101 Plus CB and only where part is applicable
  6. BREAKER, 8 Amp, Push to Reset

    Part No. PD3729410

    $44.45
    • Breaker
    • 8 amp
    • 250 V AC Max
    • 50 V DC Max
    • Comes with screw on nut
    • Used on Various Robot Coupe models such as R100, R100 PLUS, R2 old style, R2N, R2N Ultra, R2N-ULTRA and only where part is applicable.
  7. CAP & SEAL

    Part No. PD2949110

    $7.83
    • For "S" blades in model R2 series except R2Dice, R300, R301
  8. CORD, W/PLUG R240, ROBOT COUPE

    Part No. PD2550510

    $53.63
    • Cord with plug
    • SJTOW type
    • 120 V
    • 13 Amp
    • 6' cord
    • 3 wire
    • 16 gauge
    • Commonly used on various Robot Coupe models such as CL 30, CL 50, CL 52, CL 52-D, R 100, R 100 Plus, R 300, R100 PLUS, R100B, R100BCLR, R2B, R2N, R2N Ultra, R2N-ULTRA, R302 and only where part is applicable.
  9. DISC-PLATE STORAGE RACK

    Part No. PD1942050

    $32.50
    • Storage Rack
    • Metal
    • Epoxy coating
    • Holds up to 8 food processor discs
    • 4 1/2" x 13 1/4" x 2 1/2"
    • Prevent blades from hitting each other while in a storage drawer. Protects blade edge.
    • Prevent employees from cutting themselves when handling these sharp blades.
    • Used on various Robot Coupe models such as CL 30, CL 50, CL 55 Pusher, CL 60 Bulk, CL 60 Pusher, Food Processor, R 100, R 100 Plus, R 300, R 301 Ultra, R100, R100 PLUS, R101, R101 Plus CB, R2 Ultra Dice, R2N, R2N Ultra, R2N-ULTRA, R301 ULTRA, R301 Ultra Dice, R301U, R302, R302V, R4, R401A, R402 V. A, R402A, R4N, R4N SERIES D, R4X, R6, R602, R602E, R6N, R6V, R6VN, R6VN-D, R6X and only where part is applicable.
  10. Fan Blade Only

    Part No. PD41434

    $26.98
    • Commonly used on Robot Coupe models: R100, CL30, CL50, R300 Series B
  11. Foot, White (best practice to change 4)

    Part No. PD1101010

    $9.05
    • Foot for base
    • White in color
    • Used on various Robot Coupe models such as R100, R100CLR, R100 Plus, R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart-serial Number 246xxxxx05), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra and where part is applicable.  

    Note: Best practice is to always replace all 4 feet to ensure the proper balance of the unit and to avoid dangerous vibrations.

  12. Front Data Plate, R100Plus (A)

    Part No. PD163156

    $30.02
    (A) Front Data Plate, R100Plus
  13. Grating Disc 6 mm (1/4") Coarse

    Part No. PD2721810

    $95.97
    • Coarse grating disc
    • 6 mm (1/4")
    • Diameter: 6 3/4"
    • Fits old and new styles
    • Commonly used on various Robot Coupe models such as R100, R100 Plus, R2N, R2N Ultra, R2 Dice, R300, R301 Ultra, R302, R302V, R401, R402V, CL30, R172 SERIES, R2, R2U, R2C, R2K, R3001U and only where part is applicable.
  14. Grating Disc, 9 mm 11/32 Extra course

    Part No. PD19389

    $84.42
    • Extra course grating disc
    • 11/32" (9 mm) diameter cuts
    • Fits old and new styles
    • Used on various Robot Coupe models such as R2N, R2N Ultra, R301 and only where part is applicable.
  15. Grating Disc, Medium 2mm 5/64"

    Part No. PD1938510

    $84.42
    • Medium grating disc
    • Medium Grating Plate, 1/8"
    • 5/64" (2 mm) cuts
    • Used on various Robot coupe models such as R100, R101, R101 Plus CB, R2N, R2N Ultra, R301 and only where part is applicable.
  16. Grating Disc, Medium Coarse, 3 mm 1/8"

    Part No. PD2554510

    $84.42
    • Medium coarse grating disc
    • 3 mm (1/8")
    • Used on various Robot Coupe models such as R2N, R2N ultra, CL30 SERIES, R100 SERIES, R172 SERIES, R2, R2U, R2C SERIES, R2K SERIES, R2N SERIES, R300 SERIES, R301U, R301U SERIES, R302 SERIES and only where part is applicable.
  17. GRATING PLATE, FINE 1.5MM 1/16"

    Part No. PD1938410

    $84.42
    • Fine Grating plate
    • 1/16" (1 1/2 mm) cuts
    • Used on various Robot Coupe models such as CL30, R100, R2C, R2N, R300, R300C, R301 ULTRA C, R301 ULTRA, R302, R302V, R401, R402V, R2-DICE, R2-DICE ULTRA and only where part is applicable.
  18. Julienne Disc, 2 x 2 mm (5/64)

    Part No. PD1938810

    $97.15
    • Julienne disc
    • 5/64" x 5/64" (2 mm x 2 mm) cuts
    • Fits old and new styles
    • Used on various Robot Coupe models such as CL30 SERIES, R100 SERIES, R172 SERIES, R2, R2U, R2C SERIES,R2K SERIES, R2N SERIES, R2U SERIES, R300 SERIES, R301U SERIES, R302 SERIES and only where part is applicable.
  19. Kidney Shaped Pusher, R100 Plus, R101

    Part No. PD2151310

    $32.96
    • Kidney Shaped Pusher
    • Plastic
    • Gray
    • Commonly used on Robot Coupe models such as R101, R100 PLUS, R101 PLUS CB and only where part is applicable.
  20. Motor Relay, 16/39 MTRP

    Part No. PD29844

    $75.94
    • Motor Relay
    • MTRP
    • 2 3/16" Height
    • Commonly used on Robot Coupe models such as Blixer 2, CL-30, CL-50, CL-50 Gourmet, CL-50 Ultra E, CL-50E, CL-52, J80 Ultra, R100, R100 PLUS, R100B, R100BCLR, R101, R101 PLUS CB, R101B, R300, R301, R301 ULTRA, R402A, CL-55 and only where part is applicable.
  21. Motor Support Screw

    Part No. PD162533

    $3.18
    • Used on various Robot Coupe models such as: R100, R100CLR, R100 Plus, R100B and R100BCLR and where part is applicable.
  22. MOTOR SUPPORT SEAL

    Part No. PD19350

    $28.94
    • Motor Support Seal
    • 1 1/2" Outer Diameter
    • Viton
    • Used on various Robot Coupe models such as Blixer 2, Blixer 3D, Blixer 4, Blixer 4 Mono, Blixer 4 Tri, Blixer 4 V.V., Blixer 4A, Blixer 4VA, CL-30, J100 Ultra, J80 Ultra, R100, R100 PLUS, R100B, R100BCLR, R101, R101 Plus CB, R101B, R2, R2 Dice, R2 Dicing, R2 Dicing Ultra, R2 Ultra Dice, R2B, R2N, R2N Ultra, R2N-ULTRA, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, R301U, R302, R302V, R401, R401A, R402, R402 V. A, R402 V.V., R402A and only where part is applicable.
  23. Motor Support, R100Plus (A)

    Part No. PD163047

    $267.45
    (A) Motor Support, R100Plus
  24. ON/OFF PUSH PIN ROD, 2.5 QT BOWL, CLEAR

    Part No. PD1415310

    $16.58
    • ON/OFF pin assembly for 2.5 clear bowl only
    • Commonly used on Robot Coupe models: R100, R100CLR, R100 Plus, R2 (Old Style), R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2NCLR (serial Number-244
  25. Plate Support Shaft

    Part No. PD2920310

    $28.35
    • Plate Support Shaft
    • Commonly used on Robot Coupe models such as  R100, R100 Plus, R101, R101 Plus and where part is applicable 
  26. ROUND PUSHER, 6" NEW STYLE

    Part No. PD1214110

    $28.40
    • Round Pusher
    • Previously red, now gray color
    • Plastic
    • Commonly used on Robot Coupe models such as R100 Plus, R101 Plus and where part is applicable
  27. RUBBER O-RING, BLACK

    Part No. PD1939210

    $6.24
    • Rubber O ring
    • This is the rubber cover for the micro switch on the top of the base
    • Provides motor compartment seal for on/off pin assembly plunger on bowl
    • Also replaces previous red O-Ring on some models
    • Used on various Robot Coupe models such as R100, R2, R2N, R2U, R4, R4B, R4C, R4N, R4X, R4Y, R60TS, R100 PLUS, R2 Dicing, R2 Dicing Ultra, R2N Ultra and only where part is applicable.
  28. S-Blade, Smooth

    Part No. PD1935810

    $111.72
    • Smooth S Blade
    • 7" Length
    • 2.5" Width
    • Outer Diameter1 13/16"
    • Plastic Hub
    • Stainless Steel Blade
    • Gray Hub
    • Commonly used on various Robot Coupe models such as R100, R100 PLUS, R100B, R100BCLR, R101, R101 Plus CB, R101B and only where part is applicable.
  29. Safety Switch Assembly

    Part No. PD1100610

    $35.65
    • Safety Switch Assembly
    • Mounts inside unit
    • Complete with wire leads and new gasket
    • Used on Various Robot Coupe Models such as  R100, R100CLR, R100B, R100 Plus, R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR, R2N Ultra, XR2U

    This is also used on some 220V 50HZ models.

  30. Screw (Base-MS 3.9 x 19), Torx

    Part No. PD25525

    $4.41
    • Screw for base
    • Torx
    • Each
    • Commonly Used on various Robot Coupe models such as R2, R2NBlixer 3, R 2 Dicing, R 2 Ultra Dicing, R100 PLUS, R100B, R100BCLR, R2 Dice, R2 Ultra Dice, R2N, R2N Ultra, R2N-ULTRA and only where part is applicable.

    Torx Bit Required (Place in search box PD25525)

  31. Screw Cover

    Part No. PD162167

    $7.83
    • Screw Cover
    • Covers screw hole on top off unit.
    • Plastic
    • Helps keep particles from getting down into the motor
    • Commonly used on Robot Coupe models: R100, R100CLR, R100 Plus, R100B and R100BCLR
         
  32. SMALL PUSHER, 7-1/2"

    Part No. PD2913810

    $23.67
    • Vegetable Pusher
    • Small
    • 7-½" height
    • Used on various Robot Coupe models such as R2, R2N, R2N CLR and where part is applicable.  
  33. Strain Relief

    Part No. PD162238

    $8.05
    • Strain Relief
    • Commonly used on Robot Coupe models: R100, R100CLR, R100 Plus, R101, R101B, R101 Plus, R2N (serial number series - R2xxxxx Also,-230xxxxx03), R2N (serial Number-244xxxxx03), R2N (3 Quart), R2NCLR (serial Number-244xxxxx03), R2NCLR (3 Quart), R2N Ultra and where part is applicable
  34. Switch Block Assy (A)

    Part No. PD162633

    $177.00
    • Commonly used on Robot Coupe models: R100 Plus
  35. Top Bearing, R100

    Part No. PD162179

    $24.89
    • Top Motor Bearing
    • Used on various Robot Coupe Models Such As R100, R100CLR, R100 Plus, R100B and R100BCLR
  36. Vent Cover (G)

    Part No. PD162859

    $26.24
    • Commonly used on Robot Coupe models: (G) Vent Cover Use on Blixer 2, Blixer 3D, Blixer 4, Blixer 4 Mono, Blixer 4 Tri, Blixer 4 V.V., Blixer 4A, Blixer 4VA, CL-30, R100, R101, R101 Plus CB, R101B, R2N Ultra, R2N-ULTRA, R301, R301 Dice, R301 ULTRA, R301 Ultra Dice, R401, R401A, R402, R402 V. A, R402 V.V., R402A & where part is applicable

36 Part(s)

Set Descending Direction
per page