Skillet
-
9TG ELEMENT INNER 480V
Part No. PD42938
$0.00- 480v, 3ph
- Used on various Market Forge models such as 1680, and where part is applicable.
This item is obsolete as of 3/2015
-
BRACKET
Part No. PD25187
$75.99- Used on various Market Forge models such as 1600, and where part is applicable.
- Dimensions are 2-1/8" x 3/4"
-
Burner 7585-1
Part No. PD66122
$185.60- Use on various Market Forge models such as: 30P-STGL, 30P-STGM, 40P-STGL, 40P-STGM and where part is applicable.
-
-
Contactor - 208/240V
Part No. PDG11363
$403.15- Contactor
- 208/240V
- 3 Pole
- Inductive Rating 25 Amp
- Resistive Rating 35 Amp
- 2-1/4" Width
- 3-1/4" Height
- 2-3/4" Depth
- Used on various Market forge models such as FCT-10CE, FCT-12CE, FCT-4CE, FCT-6CE, FT-10CE, FT-12CE, FT-20CE, FT-6CE
-
CONTROL & POTENTIOMETER, 120V
Part No. PD34653
$1,256.18- Temperature Control Board
- Comes with potentiometer
- Used on various Market Forge models such as: 30P-STGL, 30P-STGM, 40P-STGL, 40P-STGM, R-1600G, 40-PST-GL
-
CONTROL & POTENTIOMETER, 120V
Part No. PD56599
$993.20- Temperature Control Board
- Comes with potentiometer
- Used on various Market Forge models such as: 30P-STGL, 30P-STGM, 40P-STGL, 40P-STGM, R-1600G, 40-PST-GL
-
DIAL, THERMOSTAT
Part No. PD38939
$109.20- Pointer Dial
- Used on various Market Forge models such as 30P-STEL, 30P-STEM, 30P-STGL, 30P-STGM, 40P-STEL, 40P-STEM, 40P-STGL, 40P-STGM, ETP-10E, ETP-5E, PS-3E, PS-6E, ST-5G and where part is applicable.
-
Fitting Hose Nipple Steel
Part No. PD41575
$69.08- Fitting Hose Nipple Steel
- Commonly used on Market Forge models such as: 2A, 2AM36D, 2AM36E24A, 2AM36E36A, 2AM36E42/48A, 2AM36G100A, 2AM36G200A, 2AM36G300A, 2AM36SC, 2AP, 3A, 3AM36D, 3AM36E24A, 3AM36E36A, 3AM36E42/48A, 3AM36G200A, 3AM36G300A, 3AM36SC, 3AP, 4A, MF2A, MF2AM36D, MF2AM36E24A, MF2AM36E36A, MF2AM36E42/48A, MF2AM36G100A, MF2AM36G200A, MF2AM36G300A, MF2AM36SC, MF2AP, MF3A, MF3AM36D, MF3AM36E24A, MF3AM36E36A, MF3AM36E42/48A, MF3AM36G200A, MF3AM36G300A, MF3AM36SC, MF3AP, MF4A and where applicable.
-
GAS VALVE, 700 Series Nat
Part No. PD25347
$363.26- Natural gas safety valve
- 1/2" FPT IN
- 3/4" & 1/2" OUT
- W/ (2) 1/2" side out w/plugs
- 3/4" X 1/2" reducer bushings
- 1/4" CCT Pilot out
- Uses thermocouple (not included)
- Commonly used on Market Forge ovens 2500, 2700 and gas tilt skillets 1500 1700, 30-STGL, 30-STGM and where applicable.
-
-
HEATING ELEMENT OUTER 480V 3.26
Part No. PD42919
$271.51- Used on various Market Forge models such as 1680, and where part is applicable.
-
HI-LIMIT THERMOSWITCH, 50-550? F
Part No. PD448901
$219.85- Hi Limit Thermoswitch
- Temperature range 50 - 550? F
- Type 30002-101
- Commonly used on Market Forge models such as 1100-4, 1100-4GLX, 1130-4, 1130-4GLX, 1300-4, 1300-4GLX, 1500-4, 1500-4GLX, 1530-4, 1530-4GLX, 1630, 1700-4, 1700-4GLX, 30-STGL, 30-STGL-LX, 30-STGM, 30-STGM-LX, 40-STGL, 40-STGL-LX, 40-STGM, 40-STGM-LX, 1100,1130, 1300, 1500, 1530, 1700, 40STG and where part is applicable.
-
Hose Flex Liquid 1/2In
Part No. PD25531
$593.18- Hose Flex Liquid 1/2In
- Commonly used on Market Forge models such as: 30-STGL, 30-STGL-LX, 30-STGM, 30-STGM-LX, 40-STGL, 40-STGL-LX, 40-STGM, 40-STGM-LX and where applicable.
-
HTG ELEMENT OUTER 480V
Part No. PD42937
$164.31- 480v 3ph
- Used on various Market Forge models such as 1680, and where part is applicable.
-
IGNITION MODULE
Part No. PD40771
$587.00- Ignition Module
- 120V
- 4-1/4 x 2-1/2"
- 4-7/8" centers on mount tabs
- 50MA Max
- Ign time 4 seconds
- Used on various Market Forge models such as 30P-STGL, 30P-STGM, 40P-STGL, 40P-STGM, ST-12-TGG, ST-5G, ST-6-TGG, and where part is applicable.
If model and serial number are not provided or unit has been installed then the unit is non-returnable per the factory. Enter model and serial number in comment box at check out.
-
Ignitor
Part No. PD129694
$225.22- Ignitor - Carborundum
- 120 V AC
- Include Wire Leads and Bracket
- Used on various Market forge models such as 1100-4, 1100-4GLX, 1130-4, 1130-4GLX, 1300-4, 1300-4GLX, 1500-4, 1500-4GLX, 1530-4, 1530-4GLX, 1630, 1700-4, 1700-4GLX, 2500HEC, 2592HEC, 2700HEC, 2792HEC, 30-STEL, 30-STEL-LX, 30-STEM, 30-STEM-LX, 30-STGL, 30-STGL-LX, 30-STGM, 30-STGM-LX, 40-STEL, 40-STEL-LX, 40-STEM, 40-STEM-LX, 40-STGL, 40-STGL-LX, 40-STGM, 40-STGM-LX, M24G100, M24G100-4, M24G100A, M24G100A-4, M24G200, M24G200-4, M24G200A, M24G200A-4, M36G100, M36G100-4, M36G100A, M36G100A-4, M36G200, M36G200-4, M36G200A, M36G200A-4, M36G275, M36G275-4, M36G275A, M36G275A-4, M36G300, M36G300-4, M36G300A, M36G300A-4,Gas Tilt Skillet: 1300 and only where part is applicable.
-
-
Latch Assy 3500 Ultra Steam
Part No. PD25268
$60.03- Latch Assembly 3500 Ultra Steam
- Commonly used on Market Forge models such as: 3500-E, 3500-G, 3500-SC and where applicable.
-
PILOT LIGHT RED
Part No. PD47827
$74.40- Pilot Light Red
- 125V
- Commonly used on Market Force models such as 30P-STEL, 30P-STEM, 30P-STGM, 40P-STEL, 40P-STGL, 40P-STGM
-
-
PILOT W/IGNITOR NATURAL GAS
Part No. PD38923
$321.15- Pilot
- with igniter
- Natural gas
- 45" cable
- Pilot inlet OD 1/4" tubing
- Commonly used on Market forge model such as 30P-STGL, 30P-STGM, 40P-STGL, 40P-STGM and where part is applicable.
-
PIN
Part No. PD44085
$13.75- Used on various Market Forge models such as 1600, and where part is applicable.
- Dimensions are 1 1/8" x 3/8"
-
Pressure Switch Serv Kit Barka
Part No. PD25253
$687.31- Pressure Switch Serv Kit Barka
- Commonly used on Market Forge and where applicable.
-
ROLL PIN
Part No. PD44084
$5.46- Used on various Market Forge models such as 1600, and where part is applicable.
-
Shaft, Flexible 6726-1
Part No. PD51349
$383.62- Flexible Shaft, 6726-1
- Commonly used on Market Forge models such as FT-100GL, FT-20GL, FT-40GL, FT-60GL, FT-80GL and where part is applicable
-
Signal Light- Red, Round
Part No. PDG11357
$38.01- 125 Volt
- Color Red
- Flush Lens
- 1/3 watt
- Mount Size 1/2" diameter
- Snap-in style
- Used on various Market Forge models such as 2600PHE, 2692PHE, 3500, M24E18A, M24E24A, M24E32A, M24E36A, M24E42A, M24E48A, M24G100A-4SP, M24G200A-4SP, M36E18A, M36E24A, M36E32A, M36E36A, M36E42A, M36E48A, M36G100A-4SP, M36G200A-4SP, M36G300A-4SP, MSA-SB-2600, ST-10, ST-12, ST-12-TGG, ST-24, ST-6-TGG where part is applicable
-
-
-
Steam Trap Locknut Gasket
Part No. PD25257
$60.22- Steam Trap Locknut Gasket
- 7/8 X 1X 1/16
- Commonly used on Market Forge models such as: 1600, 1600, 1800, 3500-D, 3500-E, 3500-G, 3500-SC, A, A-1 and where applicable.
-
Thermocouple - HD 48" Snap Fit RS
Part No. PDG10865
$33.60- Thermocouple
- Heavy duty
- 48" long
- 20-30 MV
- Threads 11/32" - 32
- Used on various Market Forge models such as 30-STEL, 30-STEL-LX, 30-STEM, 30-STEM-LX, 40-STEL, 40-STEL-LX, 40-STEM, 40-STEM-LX and where part is applicable
-
THERMOCOUPLE, RING AND PUSH ON TERMINALS
Part No. PD37671
$349.53- Thermocouple
- 2 ea x 1/4"
- Female push-on terminals
- 1 ring terminal
- Used on various Market Forge models such as 30P-STGL, 30P-STGM, 40P-STGL, 40P-STGM, F-100L, F-100P, F-20L, F-20P, F-30L, F-30P, F-40L, F-40P, F-60L, F-60P, F-80L, F-80P, FT-100L, FT-100P, FT-20L, FT-20P, FT-30L, FT-30P, FT-40L, FT-40P, FT-60L, FT-60P, FT-80L, FT-80P and where part is applicable.
-
Thermocouple, with PG9 Adapter
Part No. PDG10873
$137.97- PG-9 Pilot Generator
- 600-750 Millivolt
- 36" Wire Leads (PG-9)
- Used on various Market forge kettles where part is applicable
-
THERMOSTAT W/Knob 100-450F
Part No. PD17110
$272.16- Thermostat with Dial
- Includes Knob & Bezel
- 2" Breakaway D-Stem
- Temp Range 100-450F
- Has posaitive off
- 60" Capillary
- Bulb 3/16" x 11-5/8"
- Type SP
- Mount 1 Vert
- Commonly used on Market Forge models 1600, 1800, electric tilt skillets; 1500, 1700 gas tilt skillets and where part is applicable
-
THERMOSTAT, HI LIMIT 500? F MAX
Part No. PD37690
$255.08- Hi Limit
- Switch
- Spade terminals
- Temperature range 500 degrees F max.
- Used on various Market Forge models such as 30P-STGL, 30P-STGM, 40P-STGL, 40P-STGM and where part is applicable.
-
Toggle, On/off
Part No. PDG10883
$20.25- On/Off Toggle
- 10A-250V/15A-125V
- Terminal 4
- Terminal Size 1/4"
- Used on various Market Forge Models such as 1200, where part is applicable
-
-
VALVE, NATURAL GAS 120 VAC
Part No. PD36939.3
$292.50- 700 Gas Safety - 120 VAC
- Natural gas
- Gas In 1/2" NPT
- Gas Out 3/4" NPT
- Gas Side 1/2" NPT
- BTU 240000
- with Slotted Thermocouple Magnet
- Used on various Market forge models such as 1500, 1700 where part is applicable.