Lights, Vapor Proof

26 Part(s)

Set Descending Direction
per page
  1. 60 INCH BRIDGE LENS

    Part No. PD52534

    $74.91
    • Please verify model and Job Listing number when ordering
    • Commonly used on Anthony models
  2. 60 INCH BRIDGE LENS CENTER

    Part No. PD52535

    $76.87
    • Please verify model and Job Listing number when ordering
    • Commonly used on Anthony models
  3. CENTER MULLION CLIP, STANDEX

    Part No. PD54091

    $8.99
    • Center Mullion Standex Clip
    • Used after 1994
  4. CENTER MULLION LENS FILTER

    Part No. PD52533

    $8.92
    • Please verify model and Job Listing number when ordering
    • Commonly used on Anthony models
  5. Eccentric Housing with Bearings

    Part No. PD211741

    $124.25
    • Comes with Bearings, Gasket & Brass Tube.
    • Designed for the #PD137413 juicer.
  6. END CAP PLUGS

    Part No. PD25904

    $5.67
    • End Cap for Light Safety Shield
    • Plastic 
    • Shields are used to cover fluorescent light bulbs.
    • Fits shields for 1-1/2" O.D. lamp
    • For Walk-Ins and food prep areas.
  7. END CLIP, STANDEX

    Part No. PD54090

    $7.95
    • Standex End Clip
    • 2 5/16" height
  8. Fixture, Light Vapor Proof

    Part No. PD61137

    $62.42
    • Light Fixture, Walk-In
    • 120V
    • 100 Watt A19 Bulb, (not included)
    • Surface mounted
    • Porcelain socket
    • Gasket: Composition fiber and cork
    • Globe: Clear Glass
    • Coated (NSF listted)
    • 4-1/4" diameter junction box
    • 9-1/4" overall length
    • Conduit electrical entry 1/2" NPS on four sides and one on top
    • Suitable for damp locations.
    • Commonly used on walk-in coolers and freezers where part is applicable
  9. Flourescent Light Cover 48"

    Part No. PD4594

    $178.00
    • Diffuser Lens Cover, old style
    • Fluorescent Light Shield
    • 49-5/8" length
    • 6-1/4" wide
    • Depth 2"
    • Diamond Textured
    • Plastic
    • 6 clips needed per cover
    • Use in walk-ins and food prep areas.

    Non returnable

  10. Flourescent Light Fixture 48"

    Part No. PD45985

    $217.35
    • Fluorescent Light Fixture, Safety Shield
    • Economical Low Profile Cooler/Freezer Light Fixture.
    • Energy efficient high power factor reduce operating costs and power consumption and generate less heat.
    • Universal ballasts operate at -4ºF (-20ºC) for freezer applications.
    • Resilient, one piece silicone gasket rated IP-65 for damp and wet locations.
    • Highly polished German alanod reflector improves light output.
    • Use in walk-in and food prep areas.
    • 48" housing
    • Uses 2 lamps (not provided)
    • UNV=120-277V
    • 50-60HZ
    • Provided with Stainless Steel hardware and European type PG-16 conduit connector
  11. Flourescent Light Fixture 48"

    Part No. PD46242

    $303.75
    • Fluorescent Light Fixture
    • Vapor proof
    • 49-7/8 x 6-3/8 x 4-1/4"
    • Shatterproof Poly Safety Shield
    • Energy efficient high power factor reduce operating costs and power consumption and generate less heat.
    • Universal ballasts operate at -4ºF (-20ºC) for freezer applications.
    • 48" housing
    • Uses 2 lamps (not provided)
    • 50-60HZ
    • Use in walk-in and food prep areas.
    • For coolers and freezers down to -20 degrees F 
  12. GLOBE, PLASTIC COATED GLASS, REF

    Part No. PD125430

    $31.06
    • Plastic Coated Glass Globe Only
    • 3-1/4" diameter x 6-3/4" long 
    • Use for refrigeration use only.
    • Not for use in kitchen exhaust hood applications.
  13. GLOBE, WALK-IN, LIGHT COVER TEMPERED

    Part No. PD23018

    $31.05
    • Globe Light Cover
    • Use for walk-in cooler freezer.
    • Tempered glass
    • 6-1/2" x 3-1/4"
    • Screw in style base
  14. LAMP SOCKET, BI-PIN FOR T-8

    Part No. PD34109.44

    $14.23
    • Lamp Socket
    • 600VAC
    • 660W
    • Use for T-8 fluorescent bulb
    • Rapid start
  15. LIGHT BULB COVER

    Part No. PD12838

    $33.29
    • Light Bulb Cover
    • Screw hole centers 3-1/2"
    • Height 2-1/2"
    • 3" mounting plate top to bottom
    • Plastic
  16. Light Bulb, 100 Watt

    Part No. PD43065

    $16.14
    • Lamp
    • Rough service, HD
    • 125/130V
    • 100W
    • Medium screw on base type
    • Silicone coating 
    • Commonly used in walk-in coolers/freezers. exhaust hoods and where part is applicable
    • Not for oven use
  17. Light Bulb, 75 Watt

    Part No. PD43066

    $16.59
    • Lamp
    • Rough service, HD
    • Safe Shield
    • 130V
    • 75W
    • Medium screw on base type
    • Commonly used in walk-in coolers/freezers, exhaust hoods and where part is applicable
    • Not for oven use
  18. LIGHT COVER 4 FOOT

    Part No. PD36315

    $399.70
    • Lens Cover (old style)
    • Fluorescent Light Shield
    • 49-5/8" length
    • 6-1/4" wide
    • Depth 2"
    • Diamond Textured
    • Plastic
    • 6 clips needed per cover
    • Use in walk-ins and food prep areas.

    Non returnable

  19. LIGHT FIXTURE, VAPOR PROOF

    Part No. PD56677

    $63.10
    • Round Light Fixture
    • Plastic coated globe, thermal and shock resistant
    • Meets all requirements for N.F.P.A and N.E.C.410
    • Coated shatter resistant glass globe
    • Wire leads
    • 5-1/2" Diameter
    • Fits 3-1/2 or 4" junction boxes
    • Commonly used in exhaust hoods
    • NSF approved
    • Made by either Kason or Component Hardware
  20. Light Guard

    Part No. PD170642

    $16.43
    Light Guard
  21. LIGHT, VAPOR PROOF W/GUARD, GLOBE

    Part No. PD125424

    $57.62
    • Glass globe and wire guard
    • Vapor Proof Lights do not come with light bulbs.
    • Mounting screw holes 5-1/8 centers
    • Screw Holes 5-16" Diameter
    • 1/2 NPT
  22. OVERHEAD LIGHT ASSEMBLY, 4' W/LED LIGHTS

    Part No. PD47495

    $477.40
    • Overhead lighting
    • 120V
    • LED lighting
    • Four feet in length
    • Used in Walk-in Cooler/Freezers.
  23. REFRIGERATOR LIGHT FIXTURE

    Part No. PD170641

    $38.24
    • Fixture, Refrigerator Light
    • 3-3/8" Diameter
    • Screw Holes, 2-1/4" center to center
    • Housing, die cast aluminum
    • Satin finish
    • Globe, Impact resistant clear polycarbonate
    • Socket, Snap-in style porcelain with wire leads
    • Rated for 40W appliance lamp
    • 120/240V
  24. SAFETY SHIELD, 48", 1-1/2" DIA.

    Part No. PD23008

    $24.21
    • Safety Shield
    • Protective shield for fluorescent tubes
    • 48"
    • Use for 1-1/2" (38 mm) diameter T-12 bulbs
    • Shatterproof
    • Can be easily cut with a knife.
  25. SOCKET ASSEMBLY- LAMP 101X

    Part No. PD32069.6

    $67.24
    • 660W, 600VAC
  26. VAPORPROOF FIXTURE W/GLOBE & WIRE GUARD

    Part No. PD23020

    $89.42
    • Canopy light fixture
    • 120 volts
    • 5-7/8" Height
    • 3-7/8 OD
    • Silicone Coated Globe
    • Wire Guard

26 Part(s)

Set Descending Direction
per page