Latch & Strikes
-
77 SERIES, LATCH & STRIKE PC
Part No. PD29568
$110.21- Door Latch
- 10-5/16"
- Chrome plated
- Screw centers
- 2-1/8" latch
- 3-1/16" latch
- 2-3/16" x 1-1/8" strike
- Offset 1/8 to 1/4"
- Commonly used on Walk-ins
-
BODY (HANDLE) TC 58 SERIES CHR HD SPRING
Part No. PD42451
$257.48BODY (HANDLE) TC 58 SERIES CHR HD SPRING -
Chrome Latch Only w/Key
Part No. PD170566
$255.57- Chrome Latch with Key Only
- K56 Series
- Latch Screws: (4) 1/4" Oval Head
- The Push Rod (inside release) for this latch must be ordered separately
- Mounting Holes 2-1/2" x 2-1/8" x 3-3/8"
-
DOOR HANDLE, FLUSH EDGE MOUNT W/LOCK
Part No. PD45813
$120.05- Door Handle, Flush Edge Mount with Lock
- 10-1/8 overall x 1-1/8" width
- Handle height 1-11/16"
- Base length 5-3/4"
- Finish Chrome
-
DOOR LATCH & STRIKE
Part No. PD30558
$473.21- Magnetic door handle and latch
- Straight handle
- No lock
- Chrome finish
- Used by various manufacturers.
- Used on various Nu Vu models such as UB-E5/5 and where part is applicable.
-
DOOR LATCH & STRIKE , CHROME
Part No. PD46925
$52.81- Cabinet Latch
- Heavy duty
- Chrome plated die cast zamak.
- Provided with flush, 1/8" (3.2mm) and 3/8" (9.5mm) keepers.
-
DOOR LATCH, OFFSET HANDLE, MAGNETIC
Part No. PD25514
$104.07- Offset Handle Complete
- 11-1/2" overall, including handle
- 7/8" x 6-5/8"
- Holes; 4-3/16 centers and 1" from bottom hole and 5/8" from top hole center.
- 3-1/2" centers
- Plate 5-1/4" x 1"
- Chrome
- Non locking, no key
- Heavy-Duty Magnetic Action provides positive and effective seal and eliminates door bounce back
- Unique Breaker Action* eliminates powerful magnetic seal while allowing easy opening
- Serrated Striker Plate permits quick adjustment to compensate for door sag
- Reversible for right or left hand use
- Extra Heavy-Duty rugged construction
- Mounting hole locations are interchangeable with competitors latches
-
EMERGENCY PUSH ROD, SAFETY GLOW
Part No. PD27182
$38.04- Standard Type Push Rod
- 9-1/2" Overall Length
- 1-15/16" Plunge Depth
- Has a 6 inch rod that can be cut to fit
- Glow handle to see in the dark
- Used on various walk-in's for releasing the door latch.
- Push rod is drilled for #10 pan head screws.
- Commonly use on Kason K56 Series
-
Handle Complete with Key
Part No. PD39240
$266.49- Walk In
- Includes Knob style inside release
- 13-7/8 overall x 2-5/16 wide OD
- 1-7/8" high
- 8" screw centers
- Brushed chrome
-
-
HANDLE, KEY LOCK W/LEVER TURN RELEASE
Part No. PD168119
$247.10- Polish chrome
- Over all length is 14-1/32 inch
- Comes with a lever turn release
- Commonly used on Walk-in cooler/freezer
-
Lacquer Strike Only
Part No. PD28960
$31.20- Strike Only
- K56 Series
- 3/4 inch to 1-1/2 inch offset
- Finish: Lacquer
- Strike Screws: (4) 1/4" Oval Head
- The Push Rod (inside release) for this latch must be ordered separately
-
LATCH W/LOCK
Part No. PD125367
$382.18- Latch Only With Lock
- No Strike
- Polished Chrome
- 11-3/4" Overall Length
- Length 7" Without handle
- 3-3/8" Mount Hole Centers
- Strike W/4 Hole Base 3-7/32"W X 1-29/32"L
- Solid Ss Inner Working Parts And Forged Brass Handle
- Used for various Kason models and where part is applicable.
-
LATCH & STRIKE
Part No. PD125322
$45.24- Straight Handle Latch With Strike
- Chrome
- 10-11/16" overall
- 5-7/8" base
- 1-7/32 base width
- Outside screw centers are 5-1/4"
- Use for series 2830, 59-1105, C8765, 9176, 9177, R35
-
LATCH & STRIKE
Part No. PD125330
$188.10- Latch With Strike
- 10-3/4" overall length
- Screw Centers 5-18" then 3/4"
- Chrome plated
-
LATCH & STRIKE
Part No. PD125354
$139.40- Latch With Strike, 18 lb Tension
- Plate 5-13/16" x 1-5/16"
- Strike plate 2" x 1-5/8"
-
LATCH & STRIKE
Part No. PD125365
$971.26- Latch With Strike, 15/16" - 1-5/8" Offset
- Body Length: 9-15/16"
-
LATCH & STRIKE
Part No. PD125495
$108.75- Latch With Strike, flush 1/4"
- Adjustable strike from flush to 3/8"
- Mounting plate strike, 2-3/32" x 1-9/16"
- Mounting plate latch, 2-3/32" x 2-5/16"
- Strike Not avalable Separately
-
LATCH & STRIKE
Part No. PD125497
$119.74- Mechanical Latch With Strike
- Offset 3/4" - 1-1/4"
- Adjustable micrometer strike from 3/4" to 1-1/4"
- Mounting plate strike, 2-3/32" x 1-9/16"
- Mounting plate latch, 2-3/32" x 2-5/16"
- Curved handle
- No lock
- Polished Chrome
- Commonly used for Kason 930 series and Component Hardware 9140, 2818 series.
-
LATCH & STRIKE
Part No. PD42880
$76.27- Latch With Strike
- Flush mount
- Positive snap-action latch. Ideal for mobile carts and refrigerated cabinets.
- Solid brass trigger mechanism and powerful spring.
- Heavy duty pressure die cast handles and body to withstand severe commercial use.
- Reverse left or right hand.
- Can accept security padlock.
- Mounting plate strike, 2-3/32" x 1-9/16"
- Mounting plate latch, 2-3/32" x 2-5/16"
- Overall length including strike is 6-3/4"
- Overall width 2-3/32"
- Chrome
- Strike not available separately
- Replacement for Premco 106ZC-02, Grand Rapids 4722-1
-
LATCH & STRIKE - STRAIGHT HANDLE
Part No. PD125494
$132.29- Latch with Strike
- 11-1/2" x 1-1/8"
- Pull style handle
- Magnetic
- Edgemount
- 4-3/16 inner mount hole centers
- 5-7/8 outer mount hole centers
- 3-1/2 gasket hole centers, 1" x 5" OD
- Magnet 1 x 5 3-1/2" hole centers
-
LATCH & STRIKE with HANDLE
Part No. PD125328
$82.86- Door Latch with Strike
- Edgemount design
- 1-1/16 x 9-5/16" overall
- 9-5/16" overall length
- 5-1/4" without handle, base dim.
- 4-1/2" outside screw center holes
- 1-1/16" wide
- 1" width
- Commonly used on Alto-Shaam, Hobart, Vulcan Hart, Wittco models only where applicable.
Confirm your measurements before purchase.
-
LATCH & STRIKE, OFFSET HANDLE
Part No. PD125324
$59.54- Latch With Strike
- Offset Handle
- 10-11/16" overall
- 5-7/8" base
- 1-7/32 base width
-
LATCH (W/1-5/8 STRIKE)
Part No. PD240521
$196.98- Latch with Strike
- 10-15/16" latch
- 2-15/16 overall height
- 1-7/8" wide
- Chrome plated
- 3/4 to 1-5/8" offset
-
LATCH (w/flush, 1/8 ,3/8 strikes)
Part No. PD231933
$38.93- Latch
- Comes with strike for
- flush mount
- 1/8"
- 3/8"
- Latch measurement 1-13/16" long
- Latch base measurement 1-1/2" x 1-1/2"
- 11/16" screw centers, latch
- Chrome
-
LATCH (W/STRIKE)
Part No. PD243338
$82.86- Latch with strike
- Edgemount
- 9-5/16"L x 1-1/16"
- 4-1/2" Outside Mount Hole Centers
- Strike 3/4" x 2-3/8", 1-1/2" Hole Centers
- Chrome plated
- Commonly used on Vollrath models such as
- 1000
- 1001
- 1004
- 1005
- 1022
- 1023
- 1040
- 1041
- 1200
- 1201
- 1202
- 1203
- 1204
- 1205
- 1240
- 1241
- 1421-000-E
- 1433-000-E
- 1434-000-E
- 1454
- 1455
- 1456
- 1457
- and only where part is applicable
Confirm your measurements before purchase.
-
LATCH AND STRIKE ASSEMBLY
Part No. PD171256
$159.39- Polished Chrome
- 2 x 3-1/2" centers on latch
- 2-1/4" center on strike
- Overall length 10-1/4"
- Strike adjustable from 3/4 to 1-5/8"
- Commonly used on Walk-Ins
-
LATCH ONLY
Part No. PD125332
$223.63- Latch Only
- Mounting plate strike, 2-3/32" x 1-9/16"
- Mounting plate latch, 2-3/32" x 2-5/16"
- Strike Not avalable Separately
-
-
LATCH ONLY
Part No. PD125366
$337.17- Chrome
- Light spring
- 11-3/4" overall length
- Solid stainless steel inner workings
- Forged brass handle
- Length, 7" without handle extension from latch base measurement
- 3-3/8" screw centers
- No strike included (call if strike needed)
- Commonly used on walk-in units
-
LATCH ONLY W/LOCK
Part No. PD125372
$179.33- Latch Only With Lock
- Latch base, 2-61/64" wide
- No strike included, NLA
-
LATCH ONLY, POLISH CHROME
Part No. PD37773
$79.99- Latch Only
- K58 Series
- Finish: Chrome
- Latch Screws: (4) 1/4" Oval Head
- The push rod (inside release) for this latch must be ordered separately
- Commonly used on Walk-in's
-
LATCH STRAIGHT HANDLE W/STRIKE
Part No. PD125327
$269.33- Straight Handle Latch With Strike
- 10-11/16" overall length
- 6-13/32" without handle, base length
- Outside screw centers 5-5/8"
- Width 1-1/8"
- No lock
-
LATCH WITH CYLINDER LOCK
Part No. PD29307
$230.60- Handle only
- No strike
- Heavy spring
- Designed for foam doors
- Design provides geater frost resistance
- Overall length 10-5/16 inch long
- Screw centers 2-1/8 x 3-1/8
- Polished chrome finish
-
Latch With Strike, 1-1/8" - 1-3/8"Offset
Part No. PD125503
$366.20- Latch With Strike, 1-1/8" - 1-3/8" Offset
- Mounting plate strike, 2-25/32" x 1-9/16"
- Mounting plate latch, 2-25/32" x 2-9/16"
-
Latch With Strike, Offset 7/8" - 1-1/4"
Part No. PD125501
$141.60- Latch With Strike, Offset 7/8" - 1-1/4"
- Micro-turn strike for adjustments in 1/16" increments from 7/8" to 1-1/4"
- Mounting plate strike, 2-3/32" x 1-9/16"
- Mounting plate latch, 2-3/32" x 2-5/16"
- Strike Not avalable Separately
-
-
Latch, Body Only Heavy Spring
Part No. PD38704
$139.42- Length distance from center hole to center hole is 3-1/16"
- Total length less tongue is 10-5/16"
- Overall 11"
- Screw hole centers
- 3-1/16"
- 2-1/16"
- Has hole for inside release
- Padlock body
-
LATCH, CHROME, PULL HANDLE
Part No. PD21727
$64.68- Latch
- Pull Handle
- Chrome
- Edgemount
- Overall length 9-1/4"
- Centers 3-3/4 & 3/4"
- 1" Wide
-
LATCH, DOOR, WITH STRIKE PLATE
Part No. PD43238
$87.66- Latch, door & strike plate
- Edgemount magnetic latch with breaker action
- Black thermoplastic offset handle
- 8-1/2" L x 1-1/4" H x 1" W
- Screw holes 3-3/8" centers
- Comes with snap in black plugs for screw holes
- Stainless steel mechanical parts and plates
- Reversible application
- Specially designed for heated cabinets, ovens and refrigerators
-
LATCH, HANDLE W/LOCK & STRIKE
Part No. PD125320
$96.40- Straight Handle Latch With Lock & Strike
- 0.960" x 10-1/2"
- Base 5-7/8"
- Length 10-1/2"
- For Series 2824, 9175, R24, 172
- Can be used to replace National, Kason and Component Hardware units.
-
LATCH, MAGNETIC (W/STRIKE AND LOCK)
Part No. PD243575
$150.91- Magnetic Latch
- With Strike
- With Cylinder Lock
- 11-1/2" overall
- Chrome
- Screw centers:
- 4-3/16"
- 5-13/16"
-
-
LATCH, POLISH CHROME 56 SERIES
Part No. PD38841
$144.57- Commonly used on Walk-in units.
- 11 Inch overall
- Base plate 3-3/8" x 7"
-
LATCH, STRAIGHT HANDLE W/STRIKE
Part No. PD125319
$78.75- Straight Handle Latch With Strike
- 0.960" x 10-1/2"
- Base 5-7/8"
-
LATCH, W/TWIST EMERGENCY RELEASE
Part No. PD42299
$325.48- Walk In
- Includes Knob style inside release
- 13-7/8 overall x 2-5/16 wide OD
- 1-7/8" high
- Brushed chrome
- Commonly used on Walk-in units
-
LATCH,OFFST HNDL W/LOCK/STRIKE
Part No. PD125321
$82.85- Offset Handle Latch With Strike & Lock
- 0.960" x 10-1/2"
- Base 5-7/8"
-
OFFSET HANDLE, LATCH W/LOCK & STRIKE
Part No. PD125325
$81.00- Offset Handle
- Latch With Lock, Keys & Strike
- Chrome
- 10-1/4" overall
- 1-1/4" width Base to top of handle 2-7/8"
-
POLISHED HANDLE W/LOCK
Part No. PD26065
$102.99- K 58 Series Chrome Handle with Cylinder Lock
- Does not include Strike
-
PULL HANDLE LATCH 58 SERIES P/CHROME
Part No. PD25932
$139.42- 58 series latch
- Latch No Lock
- Has Hole For Inside Release
- Mtg Hole Centers 3-1/16" Lengthwise
- Mtg Hole Centers 2-1/16" Top To Bottom
- 11" Overall Od Latch
- Latch base, 2-61/64" wide
- No strike included, NLA
- Used on various models such as Kason 55 & 77 series,Goldbond Shelving and where part is applicable.
-
Recessed Push Rod, Door
Part No. PD169131
$42.23- Inside Door Recessed Push Rod
- Overall Length: 7-1/4"
- Plunge Depth: 1-5/8"
- Recessed
- Safety glow knob
- Use with K58 series latch
-
Recessed Push Rod, Door
Part No. PD47001
$74.51- Push Rod
- Inside Door Recessed
- Inside push pad has 'safety glow' in the dark function.
- Diameter of recess mount 7-3/16"
- For doors that are 3-3/4" minimum thickness.
-
-
-
-
STRIKE AND PLATE
Part No. PD125326
$30.35- Chrome Strike and Plate
- R35 Series
- Finish: Chrome
- 1/2" centers
- Overall height 1-3/8"
- 3/4" width
-
-
STRIKE ONLY
Part No. PD125329
$107.63- Strike Only
- For latch number PD125328
- 3/4" x 2-3/8"
- 1-1/2" mount hole center
-
STRIKE ONLY
Part No. PD125374
$116.44- Strike Only, 1-3/4" - 2-1/2" Offset
- 3-11/64" tall
- Replaces Kason 59-5003
-
Strike Only
Part No. PD169097
$45.07- Strike Only
- 441 Series
- Offset: 11/16" to 1-1/2"
- Finish: Grey Powder Coat
- Strike Screws: (3) 1/4" Oval Head
-
STRIKE ONLY 1-3/4" to 2-1/2" OFFSET
Part No. PD125516
$96.37- Strike Only
- 1-3/4" - 2-1/2" Offset
- Strike plate 3-3/8 x 2-13/16"
- Latch not included
- Order PD125366 or PD125367 for latch only
-
STRIKE ONLY 3/4 to 1-5/8" OFFSET
Part No. PD125514
$119.38- Strike Only
- 3/4" - 1-1/2" offset
- Latch only length 7" w/o handle
- Strike plate 3-3/8 x 2-13/16"
-
STRIKE ONLY FLUSH TO 3/8" OFFSET
Part No. PD125368
$119.38- Strike Only
- Flush to 3/8" offset
- Strike plate 3-3/8 x 2-13/16"
-
-
-
STRIKE, FLUSH MOUNT, CHROME
Part No. PD24646
$68.25- Flush Mount Strike
- Use for K58 series Handle
- 1/8" bel x 1/4" Offset
- Chrome
- Used on various walk-in coolers and/or freezers where part is applicable.
-
STRIKE, OFFSET 3/4 TO 1-5/8 INCHES
Part No. PD38909
$36.62- This strike is use with the W19 series latch only
-
Walk-In Latch Assembly w/Key
Part No. PD171267
$209.06- Latch and Strike included
- With lock and key
- Flush mount
- Overall length 11 1/8"
- Handle mounting hole 3 3/8"
- Strike mounting hole 7/8" x 2 1/4"
-
Walk-In Latch Complete
Part No. PD169906
$254.30- Includes offset strike 1-3/8" to 1-7/8"
- Also includes emergency push rod
- Safety release doubles as closing pull handle
- Gentle push safety release assures instant access to outside when latched, key locked or padlocked
- Overall length 12-9/16"
- Screw holes - ¼" Hole, 82° Countersunk
-
WALK-IN LATCH COMPLETE
Part No. PD38244
$139.57- 342 Series Latch Complete
- Offset: flush
- Gray powder coat
- Latch: 11-3/4" x 1-1/2", 1-7/8 screw hole centers x 1-1/2"
- Comes with push rod
- WARNING: When locked with a padlock, this latch cannot be opened from the inside.
-
Walk-In Latch Complete w/Lock
Part No. PD46241
$305.82- Latch and Strike
- W38 Series
- Offset: Flush
- No Key
- Finish: Chrome
- Latch Screws: (4) #14 Oval Head
- Strike Screws: (4) #14 Oval Head
- Please order push rod separately
- Stainless steel internal parts
- Stainless steel back plate
- With lock
-
Walk-In Latch Complete with Key
Part No. PD171255
$137.83- Flush Mount Latch and Strike
- Stainless Steel internal parts and back plate
- Latch is 10-1/4" length
- 3" wide mounting plate with 4 holes on 3-1/16" centers
-
Walk-In Latch, Offset 11/16 to 1-1/2"
Part No. PD169096
$177.99- Walk-in Latch
- Offset
- 441 Series
- Offset: 11/16" to 1-1/2"
- Finish: Grey Powder Coat
- Latch: 10-5/8" x 4"
- Strike: 3-7/8 x 2-13/16
- 2" x 3" screw centers on latch
- 3-1/8" x 1-1/2" screw centers on strike
- Latch includes a push rod
-
Walk-In Safety Latch Complete
Part No. PD169094
$199.25- Complete latch assembly, 441 Series
- Includes push rod
- Offset: Flush to 11/16"
- Latch: 10-5/8" x 4"
- Strike: 3-7/8 x 2-13/16
- 2" x 3" screw centers on latch
- 3-1/8" x 1-1/2" screw centers on strike
-
Walk-In Safety Latch Complete
Part No. PD171254
$326.40- Flush mount
- Strike included
- Polished Chrome
- Overall length 10-1/4"
- 3-1/16" between screw
- 3"wide
- Commonly used on Walk-in's