Grease Trap Parts for 25 GPM Endura grease interceptors - external parts.

21 Part(s)

Set Descending Direction
per page
  1. AIR ADMITTANCE VALVE ABS

    Part No. PD46279

    $57.60
    • Air Admittance Venting Valve
    • ABS 
    • 1-1/2" and 2"
    • Allows air to enter the drainage system while preventing sewer gases from escaping.
    • Opens under negative pressure in the piping system while remaining closed if there is positive or air pressure.
    • Eliminating the need for external venting.
    • 3" & 4" for stack type venting.
    • Where local jurisdiction allows an AAV can be used as an alternative to traditional venting practice.
  2. AIR ADMITTANCE VALVE PVC

    Part No. PD54965

    $83.30
    • Air Admittance Venting Valve
    • PVC
    • 1-1/2" and 2"
    • Allows air to enter the drainage system while preventing sewer gases from escaping.
    • Opens under negative pressure in the piping system while remaining closed if there is positive or air pressure.
    • Eliminating the need for external venting.
    • 3" & 4" for stack type venting.
    • Where local jurisdiction allows an AAV can be used as an alternative to traditional venting practice. 
  3. COMPACT FLOW CONTROL 2" 25 GPM

    Part No. PD46287

    $99.99
    • Compact Flow Control
    • with cleanout and air intake
    • 2" connection 
    • Used on 25 GPM models
    • PVC
    • Gray
    • 2" Flow Controls Cannot be buried below ground, against codes in many areas.
    • Use on models 3925A02, 3925A02LO
  4. Compact Flow Control Spigot 2" 25 GPM

    Part No. PD46297

    $81.60
    • Compact Flow Control
    • Spigot
    • with cleanout and air intake
    • 2" connection
    • 25 GPM
    • PVC
    • Gray
    • Use on models 3925A02, 3925A02LO
  5. Flow Control Compact Threaded 25 GPM 2"

    Part No. PD46292

    $81.60
    • Compact Flow Control
    • Threaded Format
    • with cleanout and air intake
    • PVC
    • Gray
    • 25 GPM
    • 2" hub connection
    • Required for State of MA, City of San Francisco and City of New York.
    • Use on model 3925A02, 3925A02LO 
  6. Flow Control, Cleanout, Air Intake 2" 25

    Part No. KS107214

    $73.10
    • Flow Control
    • with Cleanout and Air Intake
    • Connection Size - 2” HUB
    • Flow Rate - 25 g.p.m.
    • PVC
    • Gray
    • 2 piece
    • Use on models 3925A02, 3925A02LO
  7. Flow Control, Cleanout, Air Intake 3" 25

    Part No. KS107215

    $81.60
    • Flow Control
    • with Cleanout and Air Intake
    • PVC
    • Gray 
    • 2 piece
    • Connection Size - 3”
    • Flow Rate - 25 g.p.m. (1.58 liters/sec.)
    • Use on model 3925A03

     

  8. Flow Control, Spigot Format 2" 25GPM

    Part No. PD227205

    $90.95
    • Flow Control
    • Spigot Format
    • with Cleanout and Air Intake
    • Gray
    • PVC
    • Connection Size 2” HUB
    • Flow Rate 25 g.p.m. (1.58 liters/sec.)
  9. Flow Control, Spigot Format 3" 25 GPM

    Part No. PD46306

    $106.25
    • Flow Control
    • Spigot Format
    • with Cleanout and Air Intake
    • Gray
    • PVC
    • 2 piece
    • Connection Size 3” hub
    • Flow Rate 25 g.p.m. (1.58 liters/sec.)
    • Use on models 3925A03
  10. Flow Control, Threaded Format 2" 20 GPM

    Part No. PD227203

    $90.95
    • Flow Control
    • Threaded
    • with Cleanout and Air Intake
    • Gray
    • PVC
    • Connection Size 2” HUB
    • Flow Rate 20 GPM (1.26 liters per sec.)
    • Use on model 3920A02
  11. Flow Control, Threaded Format 2" 20GPM

    Part No. PD227204

    $90.95
    • Flow Control
    • Threaded
    • with Cleanout and Air Intake
    • Gray PVC
    • Connection Size 2” HUB
    • Flow Rate 25 g.p.m. (1.58 liters/sec.)
    • 2 piece
    • Use on models 3925A02, 3925A02LO
  12. Flow Control, Threaded Format 3" 25 GPM

    Part No. PD46305

    $90.95
    • Flow Control
    • Threaded Format
    • with Cleanout and Air Intake
    • Gray
    • PVC
    • 2 piece
    • Connection Size - 3” hub
    • Flow Rate - 25 g.p.m. (1.58 liters/sec.)
    • Use on models 3925A03
  13. GI Lid Fixing Replacement Refurb Kit

    Part No. PD42543

    $13.13
    • Lid Repair Kit
    • Used to replace stripped or loosened cover fixing locations.
    • Screw is approx 1-5/8"
    • Sheath is approx 3/4"
  14. In-line Drain Strainer ABS DWV

    Part No. PD227221

    $146.20
    • In-Line Drain Strainer
    • Material: ABS
    • Size: 1-1/2”
    • Installed as an integrated part of the plumbing to prevent blockages.
  15. In-Line Drain Strainer PVC DWV

    Part No. PD227222

    $146.20
    • In-Line Drain Strainer
    • Material: PVC
    • Size: 1-1/2”
    • Installed as an integrated part of the plumbing to prevent blockages.
  16. Replacement Latch Kit 25LO-35-50

    Part No. KS107226

    $47.51
    • Replacement Latch Kits
    • Lid Size - 25LO-35-50
    • Kit includes 4 x latch components (2 LH & 2 RH) and replacement pivot pins
    • Used with GI models: 3925A02LO, 3935A03, 3935A04, 3950A03, 3950A04
  17. Replacement Latch Kit 7-10-15-15C-20-25

    Part No. KS107225

    $43.98
    • Replacement Latch Kit
    • Lid Size: 7-10-15-15C-20-25
    • Kit includes 4 x latch components and replacement pivot pins
    • Used with tank models: 3907A02, 3910A02, 3915A02, 3915A02C, 3920A02, 3925A02 , 3925A03 and only where part is applicable.
  18. Replacement Strainer & Access Cap ABS

    Part No. PD42541

    $75.98
    • Replacement Strainer & Access Cap
    • ABS
    • Includes
      • access cap
      • filter screen
      • o-ring seal
    • Connection size 1-1/2"
    • Used with models: 3915A02, 3920A02, 3925A03
  19. Riser Ext Set 6" 15-20-25 GI GPM

    Part No. KS107220

    $654.50
    • Grease Interceptor Recess Extension Riser
    • 6"
    • Overall measurements:  23-1/2 x 17-1/2 x 7" 
    • For Tank Sizes - 15, 20, 25gpm
    • Use with  models 3925A03, 3935A03, 3950A03 
  20. RISER, SIX INCH, 6"

    Part No. PD47324

    $654.50
    • Riser
    • 6 inches
    • Used on Endura models such as 3925XTA03 and where part is applicable.
  21. Semi-Auto Draw Off 3/4"

    Part No. KS107224

    $169.15
    • The Endura® Grease Draw Off is a convenient accessory that simplifies regular cleaning and prevents the need for cover removal with the associated release of foul odor. As a result, employees are less resistant to maintaining a regular cleaning schedule.
    • Spout not included
    • Other benefits include:
      • Universal to all Endura Grease Interceptor models
      • Simple means of regular grease removal
      • Can be fitted at or after installation of the grease interceptor
      • Flexibility of location and positioned by installer to avoid obstructions
    • Commonly used on Endura GI models: 3925A03, 3935A03, 3950A03 
    • (required for Philadelphia, PA code)
    • Kit Components:
      • 1 x Threaded bulkhead assembly
      • 1 x 1” Threaded nipple
      • 1 x Draw-Off Valve
      • 1 x Sch 40 90 Degree S x Skt Elbow.
    • Also Required: 1 x Ball Valve (Diameter to suit Endura outlet drainage) Not included in kit.

21 Part(s)

Set Descending Direction
per page