Grease Trap Parts for 10 GPM Endura grease interceptors - external parts.
-
AIR ADMITTANCE VALVE ABS
Part No. PD46279
$57.60- Air Admittance Venting Valve
- ABS
- 1-1/2" and 2"
- Allows air to enter the drainage system while preventing sewer gases from escaping.
- Opens under negative pressure in the piping system while remaining closed if there is positive or air pressure.
- Eliminating the need for external venting.
- 3" & 4" for stack type venting.
- Where local jurisdiction allows an AAV can be used as an alternative to traditional venting practice.
-
AIR ADMITTANCE VALVE PVC
Part No. PD54965
$83.30- Air Admittance Venting Valve
- PVC
- 1-1/2" and 2"
- Allows air to enter the drainage system while preventing sewer gases from escaping.
- Opens under negative pressure in the piping system while remaining closed if there is positive or air pressure.
- Eliminating the need for external venting.
- 3" & 4" for stack type venting.
- Where local jurisdiction allows an AAV can be used as an alternative to traditional venting practice.
-
COMPACT FLOW CONTROL 2" 10 GPM
Part No. PD46284
$64.00- Compact Flow Control
- with cleanout and air intake
- 2" connection
- Used on 10 GPM models
- PVC
- Gray
- 2" Flow Controls Cannot be buried below ground, against codes in many areas.
- The Flow Control is an integral component of the Endura's design. The Endura® Flow Control with Cleanout Lid provides quick access to the flow control plate, in case of blockage. External flow control makes cover removal unnecessary when clearing blockage at the flow control plate, keeping odours contained.
- Use on model 3910A02
-
Compact Flow Control Spigot 2" 10 GPM
Part No. PD46294
$81.60- Compact Flow Control
- Spigot
- with cleanout and air intake
- 2" connection
- 10 GPM
- PVC
- Gray
- Use on model 3910A02
-
FLOW CONTROL CLEANOUT 2" 10 GPM
Part No. PD46276
$73.10- Flow Control
- with Clean-out
- Air Intake
- PVC Gray
- 2" connection size
- 2 piece
- Use on model 3910A02
Installs close to the entrance of a 10 gallons per minute grease interceptor , it controls the flow so that hydro-mechanical separation of grease has time to process.
-
Flow Control Compact Threaded 10 GPM 2"
Part No. PD46289
$81.60- Compact Flow Control
- Threaded Format
- with cleanout and air intake
- PVC
- Gray
- 10 GPM
- 2" hub connection
- Use on model 3910A02
-
FLOW CONTROL SPIGOT 2" 10 GPM
Part No. PD227226
$90.95- Flow Control
- Spigot format
- 2"
- with cleanout and air intake
- PVC
- Gray
- Used on 10 GPM models
- Required for State of MA, City of San Francisco and City of New York
- Use on model 3910A02
-
FLOW CONTROL THREADED 2" 10 GPM
Part No. PD227227
$90.95- Flow Control
- Threaded format
- with cleanout and air intake
- PVC gray
- 2"
- 10GPM
- Use on model 3910A02
-
GI Lid Fixing Replacement Refurb Kit
Part No. PD42543
$13.13- Lid Repair Kit
- Used to replace stripped or loosened cover fixing locations.
- Screw is approx 1-5/8"
- Sheath is approx 3/4"
-
Replacement Latch Kit 7-10-15-15C-20-25
Part No. KS107225
$43.98- Replacement Latch Kit
- Lid Size: 7-10-15-15C-20-25
- Kit includes 4 x latch components and replacement pivot pins
- Used with tank models: 3907A02, 3910A02, 3915A02, 3915A02C, 3920A02, 3925A02 , 3925A03 and only where part is applicable.
-
WASHER PACKING-NEOPRENE
Part No. PD42301
$9.65- Commonly used on Champion models: 100HDPW, 106PW, 108HDPW, 110FFPW, 120HDPW, 44, 44DR, 44DRWS, 44LT, 44WS, 54, 64, 66DRPW, 66DRWSPW, 66LT, 66PW, 66PWWS, 70FFPW, 72, 76PW, 80DRWSHDPW, 80FFPW, 80HDPW, 84, 86PW, 90FFPW, 90HDPW, 94FFPW, 94PW, U-H1, U-HB, U-LD