Mixers
-
Bearing with Snap Ring
Part No. PD59462
$120.34- Ball Bearing
- Radial
- SKF
- Used on various Hobart models such as H600 and where part is applicable.
-
-
-
-
BRAKE SHOE
Part No. PD13244
$232.67- Use on various Hobart models such as: HCM450 and where applicable.
-
BRONZE WORM WHEEL GEAR AND BUSHING
Part No. PD70022
$73.80- WORM,WHEELBUSHING
- For models: A200, A200 - 160AE95 and where applicable
-
CAP/COVER
Part No. PD128946
$290.56- Cap/Cover
- Used on various Hobart models such as D-300,D300C, D300T and where part is applicable.
-
CUTTER/MIXER BLADE
Part No. PD12889
$297.88- VERTICAL CUTTER KNIFE
- SINGLE
- 2 REQUIRED
- Used on various HOBART models such as HCM450' VERTICAL CHOPPER and where part is applicable.
-
Gear, Bowl Lift Miter -23 Teeth
Part No. PD128959
$0.00- Gear, Bowl Lift Miter -23 Teeth
- Use for H-600
-
-
Hub Assembly, Agitator Shaft
Part No. PD128948
$225.67- Hub Assembly, Agitator Shaft
- 7-3/8" Long
- Commonly used on Hobart models such as A200 and where part is applicable
-
-
Key, Shaft Middle Planetary 3/16 (pk 5)
Part No. PD36591.1
$3.63- Shaft Key
- Middle Planetary
- 3/16" x 3/16" x 1"
- Sold as pack of 5
- Used on various Hobart models such as D300, D300T where part is applicable.
-
Pinion, Bowl Lift Miter -23 Teeth
Part No. PD128958
$0.00- Pinion, Bowl Lift Miter -23 Teeth
- Use for H-600
-
REED SWITCH
Part No. PD52653
$230.36- Housing included
- Commonly used on Hobart models: H600 Painted models
-
RETAINER FOR BOWL LIFT NUT
Part No. PD47471
$23.40- Retainer
- Used on Hobart models such as D340, D340C, H600, H600C, H600D, H600D - 160AE87, H600D - 160AJ90, HL800, L800, L800C, L800D, P660 and where part is applicable.
-
-
-
-
SERVICE KIT, WORM SHAFT
Part No. PD128955
$541.14- Worm Shaft Service Kit.
- Includes (1) Worm wheel gear,(1) Shaft,(1) 15 Tooth gear, (1) Key,(2) 3/8" Hex Nut, (1) Spacer 1.137 X .875 outer diameter', (1) Bushing .420" Inner Diameter X .870" outer diameter X .020" Thick, Has shoulder, (1) Washer .40" Inner Diameter X .750" outer diameter X .063" Thick
- Commonly used on Hobart models such as A-120, A-200 and only where part is applicable
-
-
STEEL GEAR (15T)
Part No. PD70023
$197.17- GEAR
- 15T
- For models: A200, A200 - 160AE95 and where applicable
-
Switch, On/Off
Part No. PD61261
$202.50- On/Off Switch and Plate
- Push Button replacement Kit
- 6-1/4" x 3-1/4" x 1/8"
- COH to COH is 2-5/8" and 5-1/2"
- Commonly used on Hobart Models H600, P660, L800 and where applicable.
Must provide model and serial number at check out to confirm accuracy of part.
Must Provide ML#
If information not provided, then the part is non-returnable.
-
-
-
Yoke Shifter
Part No. PD128944
$133.83- Yoke Shifter
- Used on various Hobart models such as A-200, D300, D300t where part is applicable