Heater Proofers
-
36-Pan Economy Electric Proofer, 18 x 36
Part No. PD66068
$3,213.85- Economy Electric Proofer
- 36 Pan
- 18" x 36" Pan Size
- 35 tray capacity
- 68"H x 21"W x 30.75"D
- 100% Pre-Tested Electrical Assembly Heavy Duty
- 120V
- 1440W
- 14A
- Channel construction designed for durability.
- Easy to Clean.
- Air Baffle and circulating air blower provide even heat distribution.
- Easy dual proof/heat control:
- Proof mode: Humidity from 30% to 95%. Temperatures up to 115 F,
- Heat mode: Nominal Temperatures up to 180 F
-
Blower 6" squirrel cage
Part No. PD38233
$536.35- Fan, 6" Transflow
- Used on various Wilder models where part is applicable
-
BLOWER MOTOR 115V 15A W/FAN, After 2007
Part No. PD35218.32
$179.98- Blower Motor Assembly
- This is for models manufactured AFTER 2007
- Used on various Win Holt models such as NHPL-1836-ECO, NHPL-1836-C, INHPL-1836-C, NHPL-1825-UNC, NHPL-1810-HH and where part is applicable.
- Check the control panel picture for your unit (click on More Info) before ordering.
NOTE: This is for units made after 2007.
-
-
BLOWER MOTOR ASSEMBLY, Prior to 2007
Part No. PD35121.32
$406.37- This part is used on models Manufactured PRIOR to 2007
- Motor and blower cage assembly
- This motor is the new designed motor.
- Used on various Win-Holt model such as: HP451, IHPL1836, NHPL1836, HP1836, IHP1836 and where part is applicable.
- Check the control panel picture (click on More Info) for your unit to ensure accuracy.
-
Cable Kit for NHPL Series, Winholt HP
Part No. PD51020
$152.81- Cable Kit
- Wiring Set
- Includes:
- 6' Power Cord
- Clamp 1/2"
- Cable Hanger
- Power Inlet
- Screw 1/4"-20x 1/2" (2)
- Nut 1/4"-20 (2)
- Instructions
- Used on various Win Holt models such as NHPL Series, and where the kit is applicable.
-
COMPLETE LEXAN DOOR WITH GASKET
Part No. PD28106
$212.50- Lexan Door Complete
- For heater proofer
- 21" x 63"
- Commonly used on Win-Holt models such as NHPL-1825-UNC, NHPL-1836-C, NHPL-DR-UN and where the part is applicable.
- Door gasket included. Does not include hinges or latch, sold separately
- Doors are non-returnable per Winholt
- Made to order, 2 weeks lead time usually.
-
Dart Fastener (Clip)
Part No. PD167776
$78.30- Gasket Fastener Clip
- Recommended 12 clips per drawer gasket, 20 for 1/2 door gasket.
- Commonly used on various Victory models, for drawers, 1/2 doors and full doors.
-
DIGITAL CIRCUIT BOARD for new style unit
Part No. PD47539
$899.25- Digital Circuit Board
- Used on Win Holt models that have the new style digital drawer base. Used on models such as NHP-PD-DGT, and where part is applicable.
-
-
Door Gasket 1818
Part No. PD54098
$74.98- Door Gasket
- Use on various Win-Holt models such as: NHPL1818 and where part is applicable.
-
Door Gasket, 18-3/4 x 25-1/2
Part No. PD56459
$68.40- Winholt Door Gasket
- For 1/2 size door
- 18-3/4 x 25-1/2
- Rubber
- Commonly used on models such as NHPL-1833 and where applicable.
-
Door Gasket, Black 16-5/8" x 18-3/8"
Part No. PD54999
$66.47- Door Gasket
- Push-in
- 16-5/8 x 18-3/8"
- Magnetic
- Black
- Single Dart
- Use on various Win-Holt models such as NHPL1810, NHPL1810-HHC and where part is applicable.
-
DOOR LATCH, MAGNETIC, COMPACT 8-1/4 L
Part No. PD27152
$105.15- Compact Door latch
- Magnetic
- Breaker action releases magnet for easy opening
- Handle can be mounted up or down, left or right hand doors
- Offset handle
- Latch is edge mount, strike is surface mounted
- Drilled and countersunk for No. 10 flat head screws (not included)
- 8-1/4L x 3.45W x 13/4H
- Chrome plated
- Commonly used on BKI model FS and Winholt Heater Proofer where applicable.
- Ships in 3-4 days.
-
DOOR LATCH, MAGNETIC, COMPACT 8-1/4" L
Part No. PD56562
$131.15- Compact Door latch
- Magnetic
- Breaker action releases magnet for easy opening
- Handle can be mounted up or down, left or right hand doors
- Offset handle
- Latch is edge mount, strike is surface mounted
- Drilled and countersunk for No. 10 flat head screws (not included)
- 8-1/4L x 3.45W x 13/4H
- Chrome plated
- Commonly used on BKI model FS and Winholt Heater Proofer where applicable.
- Ships in 3-4 days.
-
DOOR, COMPLETE LEXAN RH
Part No. PD28107
$255.00- Lexan Door Complete
- 21" x 63"
- Door gasket
- Door hinges
- Commonly used on Win-Holt models such as NHPL-1836A-LT, NHPL-1836-C and where part is applicable.
- Must specify Right Hand or Left Hand Hinge.at checkout.
-
DOOR, REPLACEMENT COMPLETE MDL 1825
Part No. PD47422
$198.05This door is currently having problems with fit pre the factory and is not available at this time.
- (Per the factory, doors are not returnable.)
- ETA 2-3 weeks from the factory.
- Replacement Door Complete
- Est dims: 58.25" x 20"
- Includes:
- Door Hinge Leaf (on door only)
- Gasket
- Used on WinHolt models such as NHPL-1825-UNC, NHPL series where the part is applicable.
-
DRAWER, NHPL-PD-HP
Part No. PD45321
$1,316.14- Heater proofer drawer
- High performance
- 1800 watts
- 120 VAC
- 20 amp
-
DRIP PAN
Part No. PD46621
$48.60- Drip Pan
- Plastic
- 2-1/2 Quart
- Used on various Win-Holt proofers such as NHPL1836CA, NHP1825, NHPL1825 and where part is applicable.
-
Drip Pan
Part No. PD46684
$51.00- Drip Pan
- Used on various Win Holt proofers where part is applicable.
-
ELEMENT 120V 600W U STYLE
Part No. PD35123
$59.99- Dimensions
- Length To top center of dome 10-1/2"
- Width 8-1/2"
- Commonly used on Win Holt models 1836 series, NHP-PD-ECO and only where part is applicable.
- Check the control panel picture for your unit
- Dimensions
-
-
ELEMENT, 1700W WET/DRY HEATER
Part No. PD32525
$242.06- Element
- 1700W
- Wet-Dry heater
- Fro proofers
- Overall 13-7/8" (including spade terminals)
- Use on various Wilder models such as: H451-UA13NF and where part is applicable.
-
ELEMENT, 900W U STYLE
Part No. PD12746.17
$189.99- 900 Watt
- U shape
- Length to top center of dome 16-7/8"
- Length 17" X Width 13" X Height 1.5"
- Used on various Winholt models such as NHPL, NHP-PD-ECO and only where part is applicable.
- Please verify age of unit by serial number or color of electrical panel
- Check the control panel picture for your unit
- Verify if 900 watt or 600 watt element there are 2 elements in unit
-
ELEMENT, WATER PAN 600W UNITS AFTER 2007
Part No. PD12748
$66.15- Water Pan Element style is "W"
- 600 watts
- Commonly used on Win Holt models such NHPL-1836/CA, NHPL-1836-ECO, NHPL-1836-C, INHPL-1836-C, NHPL-1825-UNC, NHPL-1810-HH and where part is applicable.
- Check the control panel picture for your unit for match on 'view details' page.
NOTE: This item is for units after 2007.
-
GASKET, DOOR 18" x 53" SNAP-IN
Part No. PD54803
$65.21- Door Gasket
- NSF
- Magnetic
- Snap-in style
- Single dart
- Size approximately 18" x 53"
- Used on various Win-Holt models such as NHPL-1836, NHPL1836DR, NHPL1836-DR, NHPL-1836-DR-GSKT, any model with '1836' in it.
-
Gasket, Door 4-Sided 58-1/4 x 20-1/2"
Part No. PD66133
$84.99- Gasket
- Snap-in style
- Heater-Proofer
- 4-sided
- Black
- Rubber Style
- Measurement 58-1/4 x 20-1/2"
- This gasket is used with units with adjustable runners. (Pan Holders)
- Universal gasket used on Win-Holt models such as NHP-PD-UN, NHPL1825-UN, NHPL-1825-UNC, NHP-PD-EC and where part is applicable.
-
HANDLE (1836 SERIES)
Part No. PD36324
$38.50- Check the control panel picture for your unit
- Used on various Win Holt and Nu-Vu models such as: IHP, NHP, NHPL and where part is applicable.
-
Heated Drawer Replacement Complete
Part No. PD51924
$1,073.55- Heated Drawer Replacement
- 120V
- 1440 Watts
- Heated Drawer Replacement plugs into any standard 110V outlet
- 29-5/8" x 16-7/8" x 6-7/8"
- This is the only drawer replacement available for the NHP, NHPL, replacement for model NHPL-PD-CH
-
Heated Drawer Replacement, 110V Digital
Part No. PD47564
$1,949.54- New style Winholt Complete Heated Drawer Replacement
- New Style, Digital
- 120V
- 1440 Watts
- Heated Drawer Replacement plugs into any standard 110V outlet.
- 29-5/8" x 16-7/8" x 6-7/8"
- This is the only drawer replacement available for the NHP & NHPL series models and models such as NHP-PD-ECO, NHP-PD-DGT
- The Drawer is built-to-order. Ships from Texas.
-
HEATER ASSEMBLY W/COVER
Part No. PD47124
$117.95- Water Pan Assembly
- Heating element with aluminum extrusion
- U shaped element with spade terminals
- Water pan with studs
- Cover
- Commonly used on Win Holt models such as NHPL-1836-ECO, NHPL-1836-C, INHPL-1836-C, NHPL-1825-UNC, NHPL-1810-HH and where part is applicable.
NOTE: This is for units made after June 2013.
-
HEATER, WATER PAN 120V 600W Old Style
Part No. PD36195
$107.21- Used In Win-holt & Nu-Vu units
- 10" L, 10-3/4" L including terminals x 2-7/8" W
- Check the control panel picture for your unit
- Replaces old block style element
-
-
Heating Element 1500W
Part No. PD36191.32
$326.81- Wet Heating Element
- 14-5/8" x 2-3/4" x 6-1/4"
- 120V
- 1500 Watt
-
HIGH LIMIT SWITCH, SNAP DISK
Part No. PD56632
$72.15- Snap High Limit Switch Disk
- Two spade terminals
- Use on various Win-Holt models such as: HP, IHP, IHPL, NHP, NHPL, 1836 Series, 1825 Series, 1810 Series and where part is applicable.
-
HINGE, DOOR 2" LEAF
Part No. PD28108
$69.05- Hinge
- 2" Leaf
- Used on various Win Holt/Wilder models such as IHP, IHPL, & NHPL 1836, and where part is applicable.
-
HUMIDITY CONTROL SWITCH 220V
Part No. PD38303
$227.70- Infinite control
- Humidity
- 220 volts
- Used on various Wilder Nu-Vu models such as 359AW240 and where part is applicable.
-
KNOB, METALLIC
Part No. PD12658
$6.00- HEAT OR PROOF
- This is new style
- Check the control panel picture for your unit
- Commonly used on Winholt models such as: NHP, NHPL, and where part is applicable
-
LED THERMOMETER 120V (ROUND HOLE)
Part No. PD56452-RD
$73.10- LED Thermometer with Transformer
- 12V
- For units that have a rectangular cut-out only
- For Winholt units 2007 and newer.
- (For units with a round hole cut-out, use PD53231-RT)
- Commonly used on Win-Holt models such as INHPL-1836, NHP-DR, NHPL-1810/HH, NHPL1825-UN, NHPL-1836, NHPL-1836-ECO, NHPL-DR, NHPL-PD-CH, NHP-PD-ECO, NHP-PD-HP, NHP-PD-UN and where the part is applicable.</li> </ul>
-
LED THERMOMETER 12V (RECTANGULAR HOLE) *
Part No. PD53231-RT
$109.79- LED Thermometer With Transformer
- 12v
- For units that have a rectangular cut-out only
- For units 2007 and newer.
- (For units with a round hole cut-out, use PD36194)
- Commonly used on Win-Holt models such as INHPL-1836, NHP-DR, NHPL-1810/HH, NHPL1825-UN, NHPL-1836, NHPL-1836-ECO, NHPL-DR, NHPL-PD-CH, NHP-PD-ECO, NHP-PD-HP, NHP-PD-UN and where part is applicable.
-
LEXAN DOOR
Part No. PD57121
$308.00- Lexan Door
- 110 LBS
- Dimensions: 60" x 20.25" x 1.25"
- Commonly used on Win Holt 1840C cabinet and where part is applicable.
-
Lighted Rocker Switch
Part No. PD12831
$110.39- Main Power Switch
- Lighted
- DPST
- 4.95" L x 5.55" W x 1.45" H
- Has 4 soldered wire leads
- Dimensions of cutout
- 13/16" x 1-3/8"
- 10A 250V
- 15A 125V
- Commonly used on Nu-Vu models where applicable.
For Production For units UP TO 2007
-
MAGNET REPLACEMENT, Catch
Part No. PD25552
$11.55- Commonly Used on Winholt Models: NHPL, Heat Unit H-232-1
-
MOTOR & FAN ASSEMBLY
Part No. PD26173.32
$498.36- Blower and Motor
- 15" x 4-1/4" x 4-1/4" (+/-)
- 120v
- With mounting bracket
- 12" squirrel cage
- Used on various heater proofer cabinets for Wilder and Nu-Vu models.
-
-
POWER RECEPTACLE, REAR, 125V 15A
Part No. PD35018.32B
$95.20- Rear Power Receptacle
- Center of Holes are 2"
- 12V 15A
- Check our control panel picture for your unit. If you see your panel then this item with work in your unit.
- Commonly used on Winholt, Nu-vu and Wilder cabinets where part is applicable.
- Used on Win-Holt model NHPL 1836.
-
POWER SUPPLY CORD 9 FT 16g UL listed
Part No. PD46923
$107.99- Power Cord
- HEAVY DUTY: Double-insulated cord and one-piece molded plug provide extra durability, vinyl jacket protects against moisture, dust and dirt to improve longevity
- EXTENDED REACH: 9' cord is great for units up to 13 amps requiring an extended reach.
- SPECIFICATIONS: Grounded 3 wire, 16AWG extension cord is rated for 1250W, 125VAC, 13A,
- SAFE: UL Listed, high visibility orange, blue or yellow and 3-prong grounded plug provide extra safety.
- 3 prong, straight male
-
POWER SUPPLY CORD 9-15 FT 3 PRNG
Part No. PD32524
$92.77- Heavy duty power cord
- 115V, 13A, 1250W, 16G
- Sun, Water, Weather, Abrasion, Ozone resistive
- CSA, UL listed
- Grounded
- 3 prong, straight
-
POWER SUPPLY CORD WITH PIGTAILS
Part No. PD47105
$141.31- Power Cord
- Pigtail, 3-wire
- 115V
- 12' cord
- Grounded male to bare end
- 3 prong, straight
- Commonly used on Win Holt models such as NHPL-1836-ECO, NHPL-1836-C, INHPL-1836-C, NHPL-1825-UNC, NHPL-1810-HH and where part is applicable.
- Check the control panel picture for your unit
NOTE: This item is used on units made after June 2013.
-
Reset Switch, Circuit Breaker
Part No. PD56571
$33.00- Reset Switch
- Winholt digital front model
- Circuit breaker
- Used on all digital front drawer units NHP-PD-DGT (drawer model number, not cabinet.)
-
Rocker Switch, Heat/Proof, 6 Terminal
Part No. PD12830.32
$105.11- Has 6 Spade terminals.
- Face of rocker is white & red.
- Cutout size 3/4 x 1-3/8
- Outside dimensions of switch approx 7/8 x 1-5/8
- Used on series models: NHP, HP, IHP, IHPL, NHP, NHPL
- Check the control panel picture above to identify your unit.
NOTE: This item is for units prior to 2007.
-
RUNNER, PROOFER RACKS (Case Only-52)
Part No. PD45167
$407.15- Runner, Rack Wire
- Heat/Proofer
- Measurement: 25 x 4 x 1-1/2"
- Universal
-
Switch, Heat Proof, 6 Term (after 2007)
Part No. PD51701
$59.34- Heat/Proof Switch
- For models made after 2007 ONLY
- 6 Terminals, terminals are seperated by a T shaped plastic divider.
- 1.21 x .97 x 1.3
- Terminals show Numbers 1,2 & 3 on one side and 4,5 & 6 on the other side.
- Face of rocker switch is all red
- Cutout Size 7/8" x 1-1/8"
- Used on various Win-holt models such as NHPL-PD-CH and where part is applicable.
- Check the control panel picture above to identify your unit.
-
SWITCH, MAIN LIGHTED ROCKER 3-TERMINAL *
Part No. PD44450
$86.98- Main Power Switch
- Rocker
- 3 Terminals
- Lighted on 1/2 of switch
- Measures outside flange 1-3/4" x 7/8"
- 120v
- Mounting hole: 0.830" x 1.450"
- Switch rated at 0° to 80° C AMP (32° to 176° F)
- Used on various Win Holt models such as NHPL-PD-CH, NHPL-1836-ECO, NHPL-1836-C, INHPL-1836-C, NHPL-1825-UNC, NHPL-1810-HH and where part is applicable.
NOTE: This is for units made after May 2013.
-
SWITCH, MAIN POWER 120V
Part No. PD30637.32
$41.15- Main Power Switch
- On/Off
- Rocker Switch
- 120V
- 4 terminals
- 1.25" x 1.4" x 1"
- 13/16 x 1" hole mount
- Use on various Wilder and Nu-Vu models such as: H451-UA13NF and where part is applicable.
-
SWITCH, MAIN POWER, RED LIGHTED 4-TERM
Part No. PD51443
$49.57- Main Power Switch
- Red
- Lighted
- 4 Tab Terminals
- Cutout Size 7/8" x 1-1/8"
- Used on various Win-holt models such as NHPL-PD-CH, NHPL-1836-ECO, NHPL-1836-C, INHPL-1836-C, NHPL-1825-UNC, NHPL-1810-HH and where part is applicable.
- Check the control panel picture for your unit
This item is for units made between 2007 and June 2013.
-
TERMINAL BLOCK 4 CONNECTORS
Part No. PD47023
$16.25- Terminal Block
- 4 screw connectors
- Commonly used on Win Holt models such as H-103-1, H-105, H-106, H-106-2, H-107, H-108, H-125, H-220, H-225, H-226, H-227, H-228, H-323-2, INHPL-1836, NHP-DR, NHP-PD-ECO, NHP-PD-HP, NHP-PD-UN, NHPL-1810/HH, NHPL-1825-UN, NHPL-1836, NHPL-1836-ECO, NHPL-DR, NHPL-PD-CH and only where part is applicable.
NOTE: This is for units made after June 2013.
-
Thermistor, All Units, Heater Proofers
Part No. PD56603
$102.15- Thermistor
- Wire leads
- 3.4 X 3.95 X .7
- Used on all WinHolt units
-
Thermostat Proofer LT 125
Part No. PD37504
$391.54- Thermostat
- Proofer
- 125
- Commonly used on Wilder-NU-VU-WINHOLT models: NHPL
-
THERMOSTAT, HEATER- PROOFER
Part No. PD45720
$233.15- Thermostat
- Heat or Proof
- 9300W
- Used on various Win Holt models such as: NHP, NHPL, HP, IHPL and where part is applicable.
- Check the control panel picture below to match this part with your model for accuracy
- Used on Win Holt models Prior to 2007
-
THERMOSTAT, HEATER- PROOFER (NEW STYLE)
Part No. PD53871
$261.15- Thermostat
- Heat and Proof
- Used on various WinHolt models such as: NHP, NHPL, HP, IHPL and only where part is applicable.
- Check the control panel picture below to match this part with your model for accuracy
- Used on Win Holt models made after 2007
-
-
WATER PAN ASSEMBLY W/ ELEMENT 600W
Part No. PD28446
$297.77- Complete assembly
- Element 600W
- Pan measures 12-5/8" x 6-7/8" x 2-1/2"
- Mounting Bracket measures 7" x 6-1/8" x 2-1/5"
- Used on various Wilder/Win-Holt models such as: 9900050S, NHP, IHP, IHPL and where part is applicable.
-
WATER PAN ASSEMBLY W/ELEMENT
Part No. PD47125
$297.77- Water Pan Assembly
- Heating element with aluminum extrusion
- U shaped element with spade terminals
- Water pan with studs
- Thermostat sensor bracket
- Heater bracket
- 13 X 7 X 3
- Commonly used on Win Holt models such as NHPL-1836-ECO, NHPL-1836-C, INHPL-1836-C, NHPL-1825-UNC, NHPL-1810-HH and where the part is applicable.
NOTE: This is for units made after June 2013.
-
WATER PAN ASSY W/ELEMENT 750W
Part No. PD42931
$308.64- Complete Water Pan Assembly
- Element
- 750W
- Pan
- Mounting Bracket
- Used on various Wilder, Nu-Vu and Win-Holt models such as 4500, 7500 and where part is applicable.
-
WATER PAN ONLY
Part No. PD41150
$74.38- Water Pan
- Overall 12-3/4 x 6-7/8 x 2-1/2
- Stainless Steel
- 2.5" Deep
- 2.4 Qt
-
Water Pan only for models 2007 and newer
Part No. PD53833
$99.79- Water Pan only
- Used on various Win Holt models such as (2007 and newer) NHP-1836, NHPL-1836 and where part is applicable.
-
-