Canplas Endura Grease Trap Parts and Accessories
-
AIR ADMITTANCE VALVE ABS
Part No. PD46279
$57.60- Air Admittance Venting Valve
- ABS
- 1-1/2" and 2"
- Allows air to enter the drainage system while preventing sewer gases from escaping.
- Opens under negative pressure in the piping system while remaining closed if there is positive or air pressure.
- Eliminating the need for external venting.
- 3" & 4" for stack type venting.
- Where local jurisdiction allows an AAV can be used as an alternative to traditional venting practice.
-
AIR ADMITTANCE VALVE PVC
Part No. PD54965
$83.30- Air Admittance Venting Valve
- PVC
- 1-1/2" and 2"
- Allows air to enter the drainage system while preventing sewer gases from escaping.
- Opens under negative pressure in the piping system while remaining closed if there is positive or air pressure.
- Eliminating the need for external venting.
- 3" & 4" for stack type venting.
- Where local jurisdiction allows an AAV can be used as an alternative to traditional venting practice.
-
Baffle 7-10-15-15C-20-25-35 GPM
Part No. PD42554
$61.87- Removable Polypropylene Inlet Baffle
- Use for 7-10-15-15C-20-25-35 GPM
- Measurement of baffle at longest point: 14-3/4 x 13-3/4 x 6-1/2"
- Use with trap models: 3915A02(S)(T), 3920A02(S)(T), 3925A02(S)(T), 39350A03(S)(T), 3950A03(S)(T), 3935A04(S)(T)
- 15.375" (A) x 13.625" (B) x 5.25" (C)
-
COMPACT FLOW CONTROL 2" 10 GPM
Part No. PD46284
$64.00- Compact Flow Control
- with cleanout and air intake
- 2" connection
- Used on 10 GPM models
- PVC
- Gray
- 2" Flow Controls Cannot be buried below ground, against codes in many areas.
- The Flow Control is an integral component of the Endura's design. The Endura® Flow Control with Cleanout Lid provides quick access to the flow control plate, in case of blockage. External flow control makes cover removal unnecessary when clearing blockage at the flow control plate, keeping odours contained.
- Use on model 3910A02
-
COMPACT FLOW CONTROL 2" 15 GPM
Part No. PD46285
$81.77- Compact Flow Control
- with cleanout and air intake
- 2" connection
- Used on 15 GPM models
- 15-15C
- PVC
- Gray
- 2" Flow Controls Cannot be buried below ground, against codes in many areas.
- Use on models 3915A02C, 3915A02
-
COMPACT FLOW CONTROL 2" 20 GPM
Part No. PD46286
$113.54- Compact Flow Control
- with cleanout and air intake
- 2" connection
- Used on 20 GPM models
- PVC
- Gray
- 2" Flow Controls cannot be buried below ground, against codes in many areas.
- Use on model 3920A02
-
COMPACT FLOW CONTROL 2" 25 GPM
Part No. PD46287
$99.99- Compact Flow Control
- with cleanout and air intake
- 2" connection
- Used on 25 GPM models
- PVC
- Gray
- 2" Flow Controls Cannot be buried below ground, against codes in many areas.
- Use on models 3925A02, 3925A02LO
-
Compact Flow Control Spigot 2" 10 GPM
Part No. PD46294
$81.60- Compact Flow Control
- Spigot
- with cleanout and air intake
- 2" connection
- 10 GPM
- PVC
- Gray
- Use on model 3910A02
-
Compact Flow Control Spigot 2" 15GPM
Part No. PD46295
$81.60- Compact Flow Control
- Spigot
- with cleanout and air intake
- 2" connection
- 15-15C
- 15 GPM
- PVC
- Gray
- Use on models 3915A02C, 3915A02
-
Compact Flow Control Spigot 2" 20 GPM
Part No. PD46296
$81.60- Compact Flow Control
- Spigot
- with cleanout and air intake
- 2" connection
- Length is 8"
- 20 GPM
- PVC
- Gray
- Use on model 3920A02
-
Compact Flow Control Spigot 2" 25 GPM
Part No. PD46297
$81.60- Compact Flow Control
- Spigot
- with cleanout and air intake
- 2" connection
- 25 GPM
- PVC
- Gray
- Use on models 3925A02, 3925A02LO
-
Compact Flow Control Spigot 2" 7 GPM
Part No. PD46293
$81.60- Compact Flow Control
- Spigot
- with cleanout and air intake
- 2" connection
- 7 GPM
- PVC
- Gray
- Use on model 3907A02
-
COMPACT GI DIFFUSER BAFFLE 7-10-15C
Part No. PD227225
$30.00- Diffuser Baffle
- Compact GI
- Use for tank size 7-10-15Compact
-
COMPACT GI OUTLET BAFFLE 7-10-15-15C
Part No. PD227224
$58.35- Outlet Baffle
- Compact GI
- Use for tank size 7-10-15Compact
-
DIFFUSER BAFFLE 35/50 GPM GI
Part No. PD42555
$69.12- GI Diffuser (Compact Model)
- 35/50 GPM
- Dimensions
- 15" x 15" at base
- 17-1/2" from top leg to opposite top leg
- 7-1/4" height
- Removable polypropylene diffuser baffle
- Use with models: 3935A03, 3935A04, 3950A03, 3950A04
-
FLOW CONTROL CLEANOUT 2" 10 GPM
Part No. PD46276
$73.10- Flow Control
- with Clean-out
- Air Intake
- PVC Gray
- 2" connection size
- 2 piece
- Use on model 3910A02
Installs close to the entrance of a 10 gallons per minute grease interceptor , it controls the flow so that hydro-mechanical separation of grease has time to process.
-
FLOW CONTROL COMPACT 2" 7 GPM
Part No. PD46283
$86.01- Compact Flow Control
- with cleanout and air intake
- 2" connection
- Used on 7 GPM models
- PVC
- Gray
- 2" Flow Controls Cannot be buried below ground, against codes in many areas.
- Use for model 3907A02
-
Flow Control Compact Threaded 10 GPM 2"
Part No. PD46289
$81.60- Compact Flow Control
- Threaded Format
- with cleanout and air intake
- PVC
- Gray
- 10 GPM
- 2" hub connection
- Use on model 3910A02
-
Flow Control Compact Threaded 15 GPM 2"
Part No. PD46290
$81.60- Compact Flow Control
- Threaded Format
- with cleanout and air intake
- 15-15C
- PVC
- Gray
- 15 GPM
- 2" hub connection
- Use on models 3915A02C, 3915A02
-
Flow Control Compact Threaded 20GPM 2"
Part No. PD46291
$81.60- Compact Flow Control
- Threaded Format
- with cleanout and air intake
- PVC
- Gray
- 20 GPM
- 2" hub connection
- Use on model 3920A02
-
Flow Control Compact Threaded 25 GPM 2"
Part No. PD46292
$81.60- Compact Flow Control
- Threaded Format
- with cleanout and air intake
- PVC
- Gray
- 25 GPM
- 2" hub connection
- Required for State of MA, City of San Francisco and City of New York.
- Use on model 3925A02, 3925A02LO
-
Flow Control Compact Threaded 7 GPM 2"
Part No. PD46288
$81.60- Compact Flow Control
- Threaded Format
- with cleanout and air intake
- PVC
- Gray
- 7 GPM
- 2" hub connection
- Use on model 3907A02
-
Flow Control Extension Kit 3"
Part No. PD45908
$36.01- Flow Control Extension Kit
- 3"
- The lower ring fits over the outside of the access opening on the top of the flow control body, allowing the installer to maintain a clean sleeve (using pipe) up to finished floor level. This part is used with a 3” flow control.
- This item is not available for the 2" flow controls. 2" flow controls cannot be buried below ground, against plumbing codes in many areas.
-
Flow Control Extension Kit 4"
Part No. PD45909
$29.50- Flow Control Extension Kit
- 4"
- The lower ring fits over the outside of the access opening on the top of the flow control body, allowing the installer to maintain a clean sleeve (using pipe) up to finished floor level. This part is used with a 4” flow control.
- This item is not available for the 2" flow controls. 2" flow controls cannot be buried below ground, against plumbing codes in many areas.
-
Flow Control Spigot Cleanout 2" 20GPM
Part No. PD42545
$90.95- Flow Control
- with Cleanout and Air Intake
- 20 GPM
- 2"
- Spigot format
- PVC
- Gray
- Required for State of MA, City of San Francisco and City of New York
-
FLOW CONTROL SPIGOT 2" 10 GPM
Part No. PD227226
$90.95- Flow Control
- Spigot format
- 2"
- with cleanout and air intake
- PVC
- Gray
- Used on 10 GPM models
- Required for State of MA, City of San Francisco and City of New York
- Use on model 3910A02
-
FLOW CONTROL SPIGOT 2" 7 GPM
Part No. PD227228
$90.95- Flow Control
- Threaded format
- with cleanout and air intake
- 2"
- 7 GPM
- PVC
- Gray
- Required for State of MA, City of San Francisco and City of New York
- Use on model 3907A02
-
FLOW CONTROL THREADED 2" 10 GPM
Part No. PD227227
$90.95- Flow Control
- Threaded format
- with cleanout and air intake
- PVC gray
- 2"
- 10GPM
- Use on model 3910A02
-
FLOW CONTROL THREADED 2" 7 GPM
Part No. PD227234
$90.95- Flow Control
- Threaded format
- with cleanout and air intake
- 7GPM
- 2" connection
- PVC Gray
- Required for City of Chicago
- Use on model 3907A02
-
Flow Control with Cleanout 2" 20 GPM
Part No. PD42547
$73.10- Flow Control
- with cleanout and air intake
- PVC
- Gray
- 20 GPM
- 2" hub connection
- Use on model 3920A02
-
FLOW CONTROL WITH CLEANOUT 2" 7 GPM
Part No. PD61347
$73.10- Flow Control
- 2" connection
- Used on 7" GPM models
- PVC
- Gray
- 2" Flow Controls Cannot be buried below ground, against codes in many areas.
- Use on model 3907A02
-
Flow Control, Cleanout, Air Intake 2" 15
Part No. KS107213
$83.00- Flow Control
- with Cleanout and Air Intake
- Gray
- PVC
- Connection Size 2” HUB
- Flow Rate - 15 g.p.m. (0.95 liters/sec.)
- 15-15C
- Use on models 3915A02C, 3915A02
-
Flow Control, Cleanout, Air Intake 2" 25
Part No. KS107214
$73.10- Flow Control
- with Cleanout and Air Intake
- Connection Size - 2” HUB
- Flow Rate - 25 g.p.m.
- PVC
- Gray
- 2 piece
- Use on models 3925A02, 3925A02LO
-
Flow Control, Cleanout, Air Intake 3" 25
Part No. KS107215
$81.60- Flow Control
- with Cleanout and Air Intake
- PVC
- Gray
- 2 piece
- Connection Size - 3”
- Flow Rate - 25 g.p.m. (1.58 liters/sec.)
- Use on model 3925A03
-
Flow Control, Cleanout, Air Intake 3" 35
Part No. KS107216
$81.60- Flow Control
- with Cleanout and Air Intake
- PVC
- Gray
- 2 piece
- Connection Size - 3” hub
- Flow Rate - 35 g.p.m. (2.21 liters/sec.)
- Use on models 3935A03, 3935A04
-
Flow Control, Cleanout, Air Intake 3" 50
Part No. KS107217
$81.60- Flow Control
- with Cleanout and Air Intake
- Connection Size - 3”
- Flow Rate - 50 g.p.m. (3.15 liters/sec.)
- PVC
- Gray
- 2 piece
- Use on models 3950A03, 3950A04
-
Flow Control, Cleanout, Air Intake 4" 35
Part No. KS107218
$111.35- Flow Control
- Cleanout and Air Intake
- PVC
- Gray
- Connection Size - 4”
- Flow Rate - 35 g.p.m. (2.21 liters/sec.)
-
Flow Control, Cleanout, Air Intake 4" 50
Part No. KS107219
$111.35- Flow Control
- with Cleanout and Air Intake
- PVC
- Gray
- Connection Size - 4” hub
- Flow Rate - 50 g.p.m. (3.15 liters/sec.)
Original item number 3934150 for this part was discontinued by the factory. This is the replacement. It might not look exactly like yours you're replacing if it is the old style unit.
-
Flow Control, Spigot Format 2" 15GPM
Part No. PD227202
$90.95- Flow Control
- Spigot Format
- with Cleanout and Air Intake
- Gray
- PVC
- Connection Size 2” HUB
- Flow Rate 15 g.p.m. (0.95 liters/sec.)
- Required for State of MA, City of San Francisco and City of New York
-
Flow Control, Spigot Format 2" 25GPM
Part No. PD227205
$90.95- Flow Control
- Spigot Format
- with Cleanout and Air Intake
- Gray
- PVC
- Connection Size 2” HUB
- Flow Rate 25 g.p.m. (1.58 liters/sec.)
-
Flow Control, Spigot Format 3" 25 GPM
Part No. PD46306
$106.25- Flow Control
- Spigot Format
- with Cleanout and Air Intake
- Gray
- PVC
- 2 piece
- Connection Size 3” hub
- Flow Rate 25 g.p.m. (1.58 liters/sec.)
- Use on models 3925A03
-
Flow Control, Spigot Format 3" 35 GPM
Part No. PD227207
$106.25- Flow Control
- Spigot Format
- with Cleanout and Air Intake
- Gray
- PVC
- 2 piece
- Connection Size 3” hub
- Flow Rate 35 g.p.m. (2.21 liters/sec.)
- Use on models 3935A03, 3935A04
-
Flow Control, Spigot Format 3" 50 GPM
Part No. PD227211
$106.25- Flow Control
- Spigot Format
- with Cleanout and Air Intake
- Gray
- PVC
- Connection Size 3” hub
- Flow Rate 50 g.p.m. (3.15 liters/sec.)
- 2 piece
- Use on models 3950A03, 3950A04
-
Flow Control, Spigot Format 4" 35GPM
Part No. PD227209
$129.20- Flow Control
- Spigot Format
- with Cleanout and Air Intake
- Gray
- PVC
- Connection Size 4” hub
- Flow Rate 35 g.p.m. (2.21 liters/sec.)
-
Flow Control, Spigot Format 4" 50GPM
Part No. PD227213
$129.20- Flow Control
- Spigot Format
- with Cleanout and Air Intake
- Gray
- PVC
- Connection Size 4” hub
- Flow Rate 50 g.p.m. (3.15 liters/sec.)
-
Flow Control, Threaded Format 2" 15 GPM
Part No. PD227201
$90.95- Flow Control
- Threaded Format
- with Cleanout and Air Intake
- 15-15C
- Gray
- PVC
- Connection Size 2” HUB
- Flow Rate 15 g.p.m. (0.95 liters/sec.)
- Use on models 3915A02C, 3915A02
-
Flow Control, Threaded Format 2" 20 GPM
Part No. PD227203
$90.95- Flow Control
- Threaded
- with Cleanout and Air Intake
- Gray
- PVC
- Connection Size 2” HUB
- Flow Rate 20 GPM (1.26 liters per sec.)
- Use on model 3920A02
-
Flow Control, Threaded Format 2" 20GPM
Part No. PD227204
$90.95- Flow Control
- Threaded
- with Cleanout and Air Intake
- Gray PVC
- Connection Size 2” HUB
- Flow Rate 25 g.p.m. (1.58 liters/sec.)
- 2 piece
- Use on models 3925A02, 3925A02LO
-
Flow Control, Threaded Format 3" 25 GPM
Part No. PD46305
$90.95- Flow Control
- Threaded Format
- with Cleanout and Air Intake
- Gray
- PVC
- 2 piece
- Connection Size - 3” hub
- Flow Rate - 25 g.p.m. (1.58 liters/sec.)
- Use on models 3925A03
-
Flow Control, Threaded Format 3" 35 GPM
Part No. PD227206
$90.95- Flow Control
- Threaded Format
- with Cleanout and Air Intake
- Gray
- PVC
- 2 piece
- Connection Size - 3” hub
- Flow Rate - 35 g.p.m. (2.21 liters/sec.)
- Use on models 3935A03, 3935A04
-
Flow Control, Threaded Format 3" 50GPM
Part No. PD227210
$90.95- Flow Control
- Threaded Format
- with Cleanout and Air Intake
- Gray
- PVC
- Connection Size 3” hub
- Flow Rate 50 g.p.m. (3.15 liters/sec.)
- 2 piece
- Use on models 3950A03, 3950A04
-
Flow Control, Threaded Format 4" 35GPM
Part No. PD227208
$129.20- Flow Control
- Threaded Format
- with Cleanout and Air Intake
- Gray
- PVC
- Connection Size - 4” hub
- Flow Rate - 35 g.p.m. (2.21 liters/sec.)
-
Flow Control, Threaded Format 4" 50GPM
Part No. PD227212
$129.20- Flow Control
- Threaded Format
- with Cleanout and Air Intake
- Gray
- PVC
- Connection Size 4” hub
- Flow Rate 50 g.p.m. (3.15 liters/sec.)
-
GI BAFFLE 50 GPM
Part No. PD42552
$53.00- Inlet-Outlet Baffle
- 50 GPM
- Used with GI models: 3950A03(S), 3950A04(S)
-
GI Fixed Baffle Kit
Part No. PD42546
$10.63- GI Fixed Baffle Kit
- Easy on site solution for applications where local jurisdiction requires fixed baffles
- 2 each stainless steel rivets
-
GI Lid Fixing Replacement Refurb Kit
Part No. PD42543
$13.13- Lid Repair Kit
- Used to replace stripped or loosened cover fixing locations.
- Screw is approx 1-5/8"
- Sheath is approx 3/4"
-
In-line Drain Strainer ABS DWV
Part No. PD227221
$146.20- In-Line Drain Strainer
- Material: ABS
- Size: 1-1/2”
- Installed as an integrated part of the plumbing to prevent blockages.
-
In-Line Drain Strainer PVC DWV
Part No. PD227222
$146.20- In-Line Drain Strainer
- Material: PVC
- Size: 1-1/2”
- Installed as an integrated part of the plumbing to prevent blockages.
-
Lid Assembly GI Full 25LO-35-50
Part No. PD42540
$243.98- Lid Assembly Kit
- For 25LO-35-50 size tank
- Reinforced Polypropylene Cover
- Size of lid is 30-3/4 x 23 inches
- 6 latches
- This replacement lid comes complete with a new gasket and lid latches
- Complete Lid Assembly excluding PDI (Product Data Identification) plate that is to be transferred from the old unit
- Used with models: 3925A02LO, 3935A03, 3950A03, 3935A04, 3950A04, 3935A6X
-
Lid Assembly GI Full 15-20-25
Part No. PD42539
$162.51- Lid Assembly Replacement Kit
- 15-20-25 GI
- Measurement 17 x 23-1/8"
- Reinforced Polypropylene Cover
- This replacement lid comes complete with a new gasket and lid latches.
- Has 8 latches.
- Complete Lid Assembly Excluding PDI plate that is to be transferred from the old unit.
- Used with Models: 3915A02, 3920A02, 3920AX6, 3925A03, 3925A02.and only where part is applicable.
-
Lid Gasket 15-20-25, 66-1/2" Round
Part No. KS107222
$69.88- Silicone Rubber Lid Gasket
- Circumference of the gasket is 66-1/2"
- Tank Size: 15, 20, 25
- Used with models: 3915A02, 3925A03, 3935A03, 3920A02, 3925A02, 3920AX6 and where part is applicable
- Do not use with the 25LO models.
- High performance replacement silicone gasket seal. Fits 15, 20 and 25 (standard lid) GPM Canplas Grease Interceptors. The premium silicone foam gasket provides an airtight seal between the cover and tank, reducing the chance of liquids, solids, or offensive odors from polluting the workplace. The gasket is recessed in the molded profile of the cover.
NOTE: Does not fit the 25 GPM Low Profile Grease Interceptor.
-
Low GI Inlet - Outlet Baffle 25GPM
Part No. PD42551
$47.01- Low GI Inlet - Outlet Baffle
- 14-1/4" x 9" x 2-3/4"
- 25gpm
- Use with model: 3925A02LO
-
Replacement Latch Kit 25LO-35-50
Part No. KS107226
$47.51- Replacement Latch Kits
- Lid Size - 25LO-35-50
- Kit includes 4 x latch components (2 LH & 2 RH) and replacement pivot pins
- Used with GI models: 3925A02LO, 3935A03, 3935A04, 3950A03, 3950A04
-
Replacement Latch Kit 7-10-15-15C-20-25
Part No. KS107225
$43.98- Replacement Latch Kit
- Lid Size: 7-10-15-15C-20-25
- Kit includes 4 x latch components and replacement pivot pins
- Used with tank models: 3907A02, 3910A02, 3915A02, 3915A02C, 3920A02, 3925A02 , 3925A03 and only where part is applicable.
-
Replacement Strainer & Access Cap ABS
Part No. PD42541
$75.98- Replacement Strainer & Access Cap
- ABS
- Includes
- access cap
- filter screen
- o-ring seal
- Connection size 1-1/2"
- Used with models: 3915A02, 3920A02, 3925A03
-
Riser Ext Set 6" 15-20-25 GI GPM
Part No. KS107220
$654.50- Grease Interceptor Recess Extension Riser
- 6"
- Overall measurements: 23-1/2 x 17-1/2 x 7"
- For Tank Sizes - 15, 20, 25gpm
- Use with models 3925A03, 3935A03, 3950A03
-
Riser Extention Set 25LO-35-50
Part No. KS107221
$654.50- Grease Interceptor Recess Extension Riser
- Tank Size - 25LO, 35, 50GPM
- 6"
- Used with GI models: 3925A02LO, 3935A03, 3935A04, 3950A03, 3950A04
-
Semi-Auto Draw Off 3/4"
Part No. KS107224
$169.15- The Endura® Grease Draw Off is a convenient accessory that simplifies regular cleaning and prevents the need for cover removal with the associated release of foul odor. As a result, employees are less resistant to maintaining a regular cleaning schedule.
- Spout not included
- Other benefits include:
- Universal to all Endura Grease Interceptor models
- Simple means of regular grease removal
- Can be fitted at or after installation of the grease interceptor
- Flexibility of location and positioned by installer to avoid obstructions
- Commonly used on Endura GI models: 3925A03, 3935A03, 3950A03
- (required for Philadelphia, PA code)
- Kit Components:
- 1 x Threaded bulkhead assembly
- 1 x 1” Threaded nipple
- 1 x Draw-Off Valve
- 1 x Sch 40 90 Degree S x Skt Elbow.
- Also Required: 1 x Ball Valve (Diameter to suit Endura outlet drainage) Not included in kit.
-
Silicone Lid Gasket Orange 7-10-15C
Part No. PD227219
$32.10- Lid Gasket
- Silicone Rubber
- Orange
- 14.5 x 17.5 x 0.4"
- Approximately 50 inches in length.
- Made from foamed silicone material
- Tank Size: 7-10-15Compact
-
Silicone Rubber Lid Gasket 25LO-35-50
Part No. KS107223
$79.89- Silicone Rubber Lid Gasket
- Tank Size - 25-LO-35-50 GPM
- Approximately 90 inches in length.
- High performance replacement silicone gasket seal. Fits 25LO, 35 and 50 GPM Canplas Grease Interceptors. The premium silicone foam gasket provides an airtight seal between the cover and tank, reducing the chance of liquids, solids, or offensive odors from polluting the workplace. The gasket is recessed in the molded profile of the cover.
- Used with Canplas models: 3925A02LO, 3925A03, 3935A03, 3950A03, 3950A04
-
SOLIDS BASKET ACCESSORY
Part No. PD227233
$412.25- Solids Basket Accessory
- Slides down inside Interceptor
- The Solids Basket Accessory is compatible with full height models of Endura Grease Interceptors 20GPM TO 50GPM
-
Solids Basket Fine Screen
Part No. PD227230
$26.44- Solids Interceptor Fine Basket
- Fine Screen
- Tank size n/a
- Connection size 2"
-
Solids Interceptor Inlet Basket
Part No. PD227229
$50.44- Solids Interceptor Inlet Basket
- Coarse Screen
- Tank size n/a
- Connection size 2"
-
Solids Interceptor Inlet Cover
Part No. PD227231
$27.56- Solids Interceptor Inlet Cover
- Tank size n/a
- Connection size 2"