Grease Filters, Wire Mesh
-
Filter Charcoal Disposable 10 x 9 x 3+/-
Part No. PD52386
$192.54- Charcoal Filter
- Metal frame
- Apprx 9-7/8" x 9-3/16" x 3"
- Throw away style, disposable.
- Hint: Per factory, should be replaced every 6 months or earlier depending on usage of machine. Inspect regularly.
- Used on various AutoFry models such as FFG-10, MTI-10 and only where part is applicable.
-
FILTER, GREASE, MESH 20x20x2
Part No. PD126535
$43.21- Aluminum Mesh Type Grease Filter
- Normal Size 20" H x 20" W x 2" T
- Actual Size 19-1/2" H x 19-1/2" W x 1-3/4" T
- Withstands commercial kitchen wear
- Easy to handle & install
- No grease drippings onto grill
- Recommended by insurance companies
- Sanitary — easy to clean & maintain
- Efficient air flow
- Design traps 98% of foreign matter
- Protects blower system & motor
- Rust Proof Aluminum
- Rugged Construction — Lightweight
- Approved by N.Y.C. Bureau of Stds. & Appeal, Cal No. 10-60 SM
- Meets requirements of NFPA Standards No. 90A & B, but does not meet NFPA96 Standards
-
FILTER, MESH 16" H x 20" L
Part No. PD37394
$35.48- Mesh Hood Exhaust Air Filter
- Galvanized Steel Frame
- 16" H nominal
- 20" W nominal
- Sold as each.
-
FILTER, MESH 16" H x 25" W x 1"
Part No. PD242548
$35.44- Mesh Hood Exhaust Air Filter
- Galvanized Steel Frame
- 16" H nominal
- 25" W nominal
- 7/8" thick
- Sold as each.
-
FILTER, MESH 20" H x 20" W x 1"
Part No. PD242533
$34.18- Mesh Hood Exhaust Air Filter
- Galvanized Steel Frame
- 20" H nominal
- 20" W nominal
- 7/8" thick
- Sold as each.
-
GREASE, FILTER WIRE MESH - 16x16x1
Part No. PD54980
$53.13- This is a custom made filter
- Part is non returnable
- Please allow 14-20 days for delivery
- 15-1/2" x 15-1/2" x 3/4"
-
GREASE, FILTER WIRE MESH - 16x20x1
Part No. PD44317
$63.53- This is a custom made filter
- Part is non returnable
- 15-1/2" x 19-1/2" x 3/4"
-
HANDLE, FILTER LOCKING (2 MESH) 2
Part No. PD242309
$26.56- Filter Locking Handle
- Steel
- Zinc plated
- Includes
- 2 springs
- 4 screws
- 2 o-rings
- 4 locks
- 2 rods
- Used on 2" thick mesh frames
- Sold as a pair.
-
HOOD FILTER, MESH 20" H x 25" W x 1"
Part No. PD242601
$39.25- Mesh Hood Exhaust Air Filter
- Galvanized Steel Frame
- 20" H nominal
- 25" W nominal
- 7/8" thick
- (actual dims 19-1/2"H X 24-1/2"W)
- Sold as each.
-
Mesh Filter, (not through away style)
Part No. PD51915
$57.37- Mesh Filter
- This filter is not the 'throw away style'
- 9-1/4" x 10" x 1-3/4"
- Used on various Autofry Models: FFG-10, MTI-10, and where part is applicable.