Food Grade Grease & Lubricants

18 Part(s)

Set Descending Direction
per page
  1. FOOD GRADE CLEANER/DEGREASER

    Part No. PD48153

    $47.25
    • Cleaner/Degreaser
    • Food Grade
    • 18 FL OZ
    • USDA K-2 Listed
    • NSF Listed
    • Designed for fast, effective removal of dirt, oil, grease, wax & tar on electrical equipment.
    • Used in kitchens where part is applicable.
  2. FOOD GRADE GREASE

    Part No. PD356368

    $62.68
    • Food Grade Grease
    • Recommended for the lubrication of food service equipment
    • Operating temperature -20 C to +150 C
    • Complies with the FDA chapter 21 CFR, 178.3570.
    • Does not promote the development of bacteria and mold
    • For use where incidental contact with food may occur.
    • Resistance to water washout
    • Very good protection against corrosion
    • Extreme pressure characteristics.
    • 14 oz tube
  3. FOOD GRADE GREASE SYNTHETIC 14 OZ

    Part No. PD22192

    $31.94
    • HIGH TEMPERATURE MULTI-PURPOSE FOOD GRADE GREASE
    • HAYNES
    • 14 OZ TUBE CARTRIDGE
    • USDA RATED
  4. FOOD GRADE OIL W/TRIGGER, NSF

    Part No. PD36442.3

    $38.70
    • Non-Aerosol Food Grade Machinery Oil
    • 14 OZ
    • Penetrates and loosens the rust, dirt, scale, and tough corrosion
    • Effective when used between 20° F up to 355° F
    • Maybe be used on chain drive belts, mixers, and conveyor type equipment
    • Rated USDAH-1
    • Comes with a trigger top.
    • NSF
  5. FOOD MACHINE OIL 16 OZ

    Part No. PD147876

    $49.14
    • 1 pint
    • 16 ounces
    • Food machine oil
    • used on Slicers, Can Openers, and where part is applicable
  6. Grease, Food Grade

    Part No. PD45634

    $42.00
    • Food Grade Grease
    • White
    • Use for anti friction bearings, plain bearings, guides, slides, joints, spline shafts, grease-lubricated chains, gears, cams.
    • Can be used in temperature range from 0° F to 300° F
    • 13.4 oz tube 
  7. GREASE, GRAPHITE, HIGH HEAT, 2 OZ

    Part No. PD241985

    $17.64
    • Graphite Grease
    • Ideal for gas valves
    • Resistant to breakdown caused by natural, LP or butane gas.
    • Withstands temperatures up to 185 degrees F/85 C
    • 2 oz tube
  8. GREASE, RED, MOBILE 1 SYNTHECTIC

    Part No. PD35124

    $32.58
    • Synthetic Grease
    • Color Red
    • NLGI Grade 2
    • Minimum Dropping Point 475° F
    • 12 Ounce Cartridge
    • Covered by OSHA and Material Safety Data Sheets are Available, ASTM 04450 GC-LB
  9. GREASE, VALVE, GAS COCK

    Part No. PD114009

    $47.46
    • Gas Cock Grease
    • 2-1/2 oz tube
    • Provides excellent lubrication at temps ranging from 32 to 175°F.
    • Will not run at high temps.
    • Remains flexible at low temps to maintain seal.
  10. HI TEMPERATURE LUBRICANT, FOAMING ACTION

    Part No. PD4221

    $38.66
    • HI TEMPERATURE LUBRICANT
    • SANITARY SYNTHETIC LUBRICATING SPRAY
    • FOAMING ACTION
    • -40° F TO 400° F (204° C)
    • 11-1/4 OZ
    • NSFH-1 REGISTERED CERTIFIED
    • MEETS USDA 1998 H-1 GUIDELINES
    • ODORLESS, SANITARY, NON-TOXIC, TASTELESS, OZONE FRIENDLY

    Can only ship ground service.

  11. LUBRICANT, ANTI-SEIZE

    Part No. PD125801

    $47.46
    • Anti-Seize Lubricant, High Temp Anti-Seize Lubricant - 1 fl oz
    • Lubricates bolts, bushings, pipe fittings, gaskets, nuts, screws, etc.
    • Prevents seizing caused by high temps, heavy loads, corrosion & vibration
    • Works in temp range from -95 F to 1800 F
  12. LUBRICANT, FOOD GRADE GREASE

    Part No. PD45954

    $11.01
    • Sanitary Food Grade Grease Lubricant
    • Heavy-duty
    • Sanitary lubricant with high load bearing, low friction properties.
    • NSF, rated H
    • FDA approved
    • Non-Toxic
    • Odorless
    • Tasteless
    • 4 oz tube
    • Lubri-Film provides a protective coating to all metal parts. A thin film will retain effectiveness on bearings, slides, and other lubricated surfaces despite moisture.
    • This sanitary lubricant is highly resistant to separation or bleed. It will not dry or gum on your equipment.
  13. LUBRICANT, FOOD GRADE, NON-TOXIC, NSF

    Part No. PD125790

    $26.03
    • Food Grade Lubricant Spray
    • Orderless, tasteless, colorless and is non-toxic
    • USP light duty spray
    • Used as a lubricant for food handling equipment
    • Ideal For Food Service Equipment
    • May also be used on drawer slides, doors, wheels (casters) and hinges.
    • Odorless, Tasteless & Non-toxic
    • FDA & USDA Approved
    • NSF it's rated H1
    • Flammable
    • Used in food processing plants for accidental food contact
    • No animal or vegetable fats, completely neutral. Will not turn rancid, will not contaminate will not taint food. 
    • 9 oz.

    NOTE: This product can only ship ground service.

  14. Moly-Fortified Gray Full Synthetic Grs

    Part No. PD4147

    $18.26
    • Moly-Fortified Gray Full Synthetic Grease
    • Fortified with extreme pressure additives for exceptional load-carrying capabilities
    • Helps inhibit rust and oxidation
    • NLG #2 GC+LB lithium complex EP grease
    • By Valvoline, SynPower Synthetic Grease
  15. OIL, SLICER GEAR

    Part No. PD60631

    $33.60
    • Slicer Gear Oil
    • Synthetic lubricant
    • 1 Quart plastic bottle
    • NSF approved
  16. OILER, ZOOM SPOUT

    Part No. PD125800

    $13.58
    • A high grade turbine oil lubricant
    • 14" Telescoping Zoom Spout for those hard to reach spots
    • Spout Oiler
    • 4 fl oz
  17. Petro Gel, 4oz

    Part No. PD125791

    $16.54
    • Food Grade Grease, 4 oz.
    • Ideal For Food Service Equipment
    • Excellent for Ice Cream and Soft Serve Machines, Slicers
    • Odorless, Tasteless & Non-toxic
    • -15° to 210°F
  18. SILICONE, FOOD GRADE, SPRAY LUBRICANT

    Part No. PD16237

    $184.50
    • Silicone Lubricant
    • Ideal for food service equipment
    • Food grade product.
    • FDA Approved
    • Non-Flammable
    • 16 oz.
    • 12 can case

18 Part(s)

Set Descending Direction
per page