Gas Burner and Component- General Use
-
ADAPTER, D-STEM - Adjustable to 3-1/2"
Part No. PD114290
$11.82- Valve Stem Extension
- 1/4" D Stem dial extension adapter
- Adjustable to 3-1/2"
- Breakaway stem
- 4"
- Use where part is applicable
-
-
BURNER, BRASS - LP
Part No. PD114266
$58.41- Gas Burner
- Material Brass
- 3/4" diameter
- Gas In 1/16" NPT
- Type LP
- Thread 5/16"-24
- Orifice #77
- 6 slot cap
- 3 air holes
- 1-1/4" long
- 2,500 BTU
-
-
-
-
-
BURNER, BRASS - NATURAL GAS
Part No. PD114268
$58.39- Burner
- Material Brass
- Gas In 1/16" NPT
- 5/16"-24
- Orifice #68
- 6 slot cap
- 3 air holes
- 2-1/4" long
- 1000 BTU
- Natural gas
-
BURNER, S/S - NAT
Part No. PD114262
$0.00- Material stainless steel
- Gas In 1/16" NPT
- Type Natural gas
-
CHAMBER, AIR MIXING
Part No. PD114294
$26.58- Air Mixing Chamber
- 1/8" NPT Inlet
- 3/4" NPT Outlet
- Includes air shutter
-
-
-
-
-
-
-
-
ORIFICE, BURNER - #70 SCREW ON
Part No. PD114492
$9.80- Burner Orifice
- Screw on style
- Size 70"
- Brass
- 1/18" NPT Male x 1/8" NPT Female
- LP gas
-
ORIFICE, BURNER - #72
Part No. PD114454
$12.88- This is a blank orifice, Specify sizing upon ordering
- Brass Hood Orifice
- # 72
- Thread Size 3/8" - 27 x 1/2"
- Commonly used on various Bakers Pride models such as XX-10, XX-12, XX-4, XX-6, XX-8 and where part is applicable.
-
Pilot Burner Inlet, Orifice
Part No. PD39104
$30.08- Pilot Burner Inlet
- Natural Gas
- 1/4"
- Commonly used on APW, GROEN, PITCO, STAR, TOASTWELL, VULCAN, GROEN where part is applicable.
-
PILOT LIGHT ASSEMBLY 12", ADJUSTABLE
Part No. PD114275
$46.46- Pilot Light Assembly
- 12"
- Adjustable
- Includes part number PD114297
-
PILOT LIGHT ASSEMBLYY 18"
Part No. PD114276
$50.83- 18" Adjustable Pilot Light Assembly (Includes PD114297)
-
-
-
TUBING, ALUMINUM - 50FT x 1/4"
Part No. PD114307
$67.84- Aluminum Tubing
- 50' roll
- 1/4" diameter OD
- Use for natural or LP gas
-
Tubing, Pilot 3/16" x 36"
Part No. PD114436
$28.35- Copper Clad Steel Pilot Tubing
- 3/16" x 36"
- Can bend to shape
- Can be used with 3/16": CCT pilot head
-
Valve Knob
Part No. PD114291
$8.27- Gas Valve Knob
- Black plastic
- 2" diameter
- .240" mount
- Position up/down
- Center rectangle with aluminum stripe
-
VALVE, BURNER
Part No. PD114023
$83.40- Valve Stem Length 1-1/8"
- A Gas In 1/8" NPT
- B Gas Out 1/4" CCT
- C 7/8"
- D 1-15/16"
- D-Stem Size 1/4"
-
VALVE, BURNER, GAS
Part No. PD114279
$38.01- Burner Valve
- Gas In: 1/8" NPT
- Gas Out: 5/16" CCT
- Inlet center to end of stem is 2-1/16"
- Stem is 1-1/4" long
- Stem center to bottom of inlet is 7/8"
-
-
VALVE, GAS, Rotation
Part No. PD114031
$45.48- Valve, rotation on/off
- Comes with orifice and handle
- 1/8 MPT x adj. orifice 47-72
- Gas In 1/8" NPT
- Gas Out 3/8-27"
- Width 2-3/8"
- Comes w/Nat Hood Orifice; If LP gas is needed use old replacement orifice.
- Commonly used on Imperial broiler series GD and with units with ring burners where part is applicable