Film Wrapper Parts
-
BEARING BLOCKS, PAIR
Part No. PD12561.17
$112.78- Bearing Blocks
- 1 pair
- 2 3/4" x 2-1/4" x 1-1/2" with angle mounting bracket
- Commonly used on Win-Holt models such as ALSS-STD, WHSC-3, WHSC-3/KD, WHSS-1, WHSS-2, WHSS-A, WHSS-BB, WHSS-CAP, WHSS-CAW, WHSS-CBD, WHSS-COR, WHSS-E, WHSS-EWC, WHSS-FHD, WHSS-FUS1, WHSS-HP6, WHSS-HP8, WHSS-PFG, WHSS-RS, WHSS-TC6, WHSS-TC8, WHSS-TK, WHSS-TM and only where part is applicable.
-
CAP, THREADED, WING
Part No. PD12563
$9.99- 3" I.D. Roll
- Threaded
- Commonly Used on Winholt Film wrappers
-
CIRCUIT BOARD, DUMMY
Part No. PD44120
$29.00- This is a dummy board used only if your circuit board has been thrown away.
- The dummy board is used as a wire holder for the cut off rod and has no other function.
- Only used if you have the new style cutoff rod which has the circuit board built into it.
- Not necessary if you still have your old board, it can be used in its place. Wiring instructions included with the new rod.
- Used on various Win Holt models such as WHSS Series, WHSS-1, WHSS-2, WHSS-3, WHSS-4 and where part is applicable.
-
CIRCUIT BOARD, HEAVY DUTY STYLE
Part No. PD41042
$159.99- Circuit Board
- Heavy duty style
- If ordering for a Win-holt sani sealer, you must purchase the heavy duty cut off rod too, unless you already have that model.
-
CORE ADAPTOR/PIN UNIT
Part No. PD12562
$9.99- Pin Size 1/4" x 2-3/4"
- Fits 3" Core ID
- Commonly Used on Winholt Film Wrappers
-
COVER, TEFLON 8" x 15"
Part No. PD41044
$48.00- Teflon Cover
- For 8" x 15" Heated pad on film wrapper
- Used on Previous Versions of Winholt Film Wrappers that had an 8" x 15" heated pad and used on similar Heat Seal Wrappers with 8" x 15" heated pad
-
CUT OFF ROD, HEAVY DUTY
Part No. PD41041
$172.41- Cut-off Rod
- Heavy duty
- If ordering for a Win-holt Sani Sealer, you must purchase the heavy duty circuit board too, unless you already have the heavy duty circuit board.
NOTE: Check your circuit board to make sure you have a heavy duty board when ordering this part.
-
Cut-off Rod With Circuit Board
Part No. PD12565
$357.14- Cut Off Rod, New Style
- (houses the circuit board)
- When replacing do not discard your circuit board. See installation instructions that come with rod.
- Used on various Win Holt models such as WHSS-1, WHSS-2, WHSS-3, WHSS-4 and where part is applicable.
If your circuit board is accidentally discarded, you will need the 'Dummy Board', see item PD44120 or else the cut off rod will not work.
-
ELECTRIC WIRE, SHEATHED 21"
Part No. PD12567
$45.00- Sleeving with wire
- Fiberglass
- 21" x 1/2"
- Commonly Used on Winholt Film Wrappers
-
FILM AXLE
Part No. PD12559
$25.88- Film Axle
- 22" length
- 5 adjustment holes
- Used on Win-Holt models such as WHSS Series, WHSS-1 and where part is applicable.
-
-
Food Wrapping Machine Complete
Part No. PD56537
$1,192.50- Film Wrapping Machine
- Over wrapper
- Wrapper with stand
- With table stand
- Holds 2 extra rolls underneath
- 18" rolls
- 65#
- 26 x 23 x 38 H
- (Price can change without notice per factory)
-
FUSE HOLDER
Part No. PD12568.17
$11.00- Fuse Holder Only
- Used on various Win Holt models such as WHSS Series, WHSS-1 and where part is applicable.
-
FUSE, 1A 250V
Part No. PD12569
$6.50- Fuse only
- 1A
- 250V
- Used on various Win Holt models such as WHSS Series, WHSS-1 and where part is applicable.
-
HOT PLATE 15 X 6" W ELEMENT, (Platform)
Part No. PD12570
$195.50- Hot Plate with Element
- Metal platform
- 15" x 6"
- Used on various Winholt models such as WHSS Series, WHSS-1 and where part is applicable.
-
PLATE RETAINER
Part No. PD47289
$30.96- Plate Retainer
- 4" x 11-1/2"
- Medal
- Commonly used on Win-Holt models such as WHSS-, WHSS-2, WHSS-3, WHSS-4 and where part is applicable.
-
PLATFORM HEATING ELEMENT
Part No. PD12566
$49.59- Platform Heating Element
- 115V
- Used on various Winholt models such as WHSS Series, WHSS-1, WHSS-2, WHSS-4, WHSC-3 and where part is applicable.
-
Platform With Heating Element 8 X 15
Part No. PD41043
$257.40- Platform with element
- Used for Heat Seal equipment only
- 8 x 15
- Hot plate assembly
- 110V
- Includes thermostat, element, fabricated plate, wires and non-stick cover.
(This item is not for Winholt equipment wrappers, see details
-
-
ROCKER SWITCH, LIGHTED 3-TERMINAL
Part No. PD12573.17
$39.60- Rocker Switch
- Lighted
- 3 Spade Terminals
- On/Off
- Snap in style
- Red
- SPST
- 1-1/4"W x 1/2"L
- 125V
- Contact current AC max 20A
- -20 to 85? C temperature range
- 100,000 operations mechanical life
- RoHS compliant
- Commonly Used on Win-holt Film Wrappers
-
TEFLON COVER, 15 x 6"
Part No. PD12574.17
$33.60- Teflon Cover
- 15" x 6" x 3/4"
- Commonly used on WinHolt models such as WHSS series and where part is applicable.
-
THERMOSTAT KNOB NEW STYLE
Part No. PD41054
$17.85- Thermostat Knob
- New Style
- Black
- Commonly used on WinHolt models such as WHSS Series, WHSS-1 and where part is applicable.
-
THERMOSTAT KNOB, SANI SEALER
Part No. PD12576
$4.50- Knob, Thermostat
- Current style
- Dimensions 1-1/8" x 1/2" with Set Screw
- Black
- Used on Winholt models such as WHSS Series, WHSS-1 and where part is applicable.
-
THERMOSTAT, FILM WRAPPER
Part No. PD29868.17
$34.00- Thermostat
- Use for film wrapper
- Knob not included
- Use for Winholt wrappers where applicable.
-
Thermostat, Film Wrapper
Part No. PD4272
$51.97- Film Wrapper Thermostat
- 1" stem
- 2-1/2" hole center
- with screws
- no dial, see item PD41054
- Used on Winholt film wrappers
-
THERMOSTAT, SANI SEALER
Part No. PD47339
$51.97- Thermostat
- Heavy duty
- Max 305° F
- 2-1/8" x 5/8" body
- Mounting holes 2-5/8" on center
- Used on Heatseal models such as 600-A, 625-A, 500-A and where part is applicable.
-
THERMOSTAT, w/o knob
Part No. PD12577
$51.97- Thermostat
- w/o Knob
- New Style
- May need to be retro fitted in field...it is a factory retro.
- 13/16" x 3-1/2"
- Item PD41053 is heavy duty thermostat and will work as old style did.
- Item in non returnable. Call if assistance is needed prior to ordering.