Evaporator & Related parts
-
ADAPTOR FITTING 3/4"
Part No. PD167884
$61.22- Adaptor Fitting
- 3/4" NPT
- Drain pan fitting.
- Used on Bohn-Heatcraft-Larking models such as MPA4501F and where part is applicable.
-
-
-
COIL, DUAL FLOW EVAPORATOR
Part No. PD47371
$1,739.70- Evaporator Coil
- Duel Flow
- Used in Walk-In coolers, freezers and where part is applicable.
-
Evaporator Assembly
Part No. PD41620
$428.00- Evaporator Assembly
- For refrigerators
- No TXV included
- Commonly used on Bohn, Heatcraft, Larkin models and where part is applicable.
-
-
EVAPORATOR ASSEMBLY - 2 FAN, COMPLETE
Part No. PD18365
$1,119.71- Evaporator assembly complete
- Aluminum housing with drain nipple
- Dual fans
- 5H x 20-1/2W x 14D
- 200 CFM
- 5-1/4" fan diameter, each
- 115V 1.46 amps
- Connections
- Inlet 3/8" OD
- Suction 1/2" OD
- Drain 1/2" OD
- Commonly used in Stanley Knight and Industrial Industries (III) prep tables and in numerous other manufacturers where part is applicable.
-
EVAPORATOR ASSEMBLY COMPLETE, SINGLE FAN
Part No. PD18364
$709.31- Evaporator assembly complete
- Aluminum housing with drain nipple
- Single fan
- 5H x 16-1/2W x 14D
- 125 CFM
- 5-1/4" fan diameter
- 115V, .65 amps
- Connections
- Inlet 3/8" OD
- Suction 1/2" OD
- Drain 1/2" OD
- Commonly used in Stanley Knight and Industrial Industries (III) prep tables and in numerous other manufacturers where part is applicable.
-
-
EVAPORATOR COIL
Part No. PD56750
$1,325.58- 23L X 8W X 6H
- Used on various Traulsen models such as G2200XX After 1/10, G300 After 1/10, G310XX After 1/10, G313XX After 1/10, G320 After 1/10, RD132W-ZCF01, RE232E-ZCF01, RET232NUT-FHS, RET232NUT-HHS, RL232W-ZCF02 and where part is applicable.
-
EVAPORATOR COIL
Part No. PD42713
$454.06- Measurements are: 32 1/2" long X 7 1/2" wide X 4" deep
- Used on various Mc Cray models such as: R-CDS34E-XXX and where part is applicable.
-
-
Evaporator Drain Pan
Part No. PD47366
$176.18- Evaporator Drain Pan
- Cast Aluminum
- 24"H x 7"L x 18"W
- Used on Bohn models such as TA-0170D and where part is applicable
-
EVAPORATOR DRIP PAN 27 X 76"
Part No. PD47468
$676.39- Evaporator Drip Pan
- 27" x 76" x 5"
- Used on Heatcraft models such as SM108 Series and where part is applicable.
-
EVAPORATOR FAN BLADE, 5 PETALS
Part No. PDA21083
$314.31- Evaporator Fan Blade
- Aluminum
- 12" Diameter
- CW
- 5 fins
- 4 mounting holes
- Commonly used in Kolpak models and where applicable.
-
EVAPORATOR FAN MOTOR
Part No. PD48213
$58.41- Evaporator Fan Motor
- 120V
- CCW
- 3/16" Shaft Length
- Used on various Leer models where part is applicable.
-
Evaporator Motor Only
Part No. PD170650
$44.36- Evaporator Motor
- For bracket order item PD46311
- For fan blade order item PD46310
- Used on merchandiser models only, such as 1002UA50MS, 45015A25MS, LCL120, 602UA45MG, 651UA33MG.
-
Evaporator Motor with Fan Blades
Part No. PD46906
$99.15- Fan Motor Kit
- C frame motor
- 115V
- Mechanically reversible
- Sleeve bearing
- Single speed
- 2 plastic fan blades included, diameters:
- 5"
- 3-3/4"
- Motor 2-1/2" x 3" x 1-3/4"
- Shaft 1-1/4" Length x 3/16" diameter
- CW rotation
- Used on Various Coldtech Models J4SRF-40B, J4SRF series and other refrigeration manufacturers models where part is applicable.
- Can replace Robertshaw models 14001, SM670, 710, 600, EM670, 90971.
-
-
Fan Guard
Part No. PD168101
$91.48- Fan guard
- 13-1/2" diameter
- 2-3/4" deep
- Commonly used on Coldzone models such as AE36120B and where part is applicable.
-
FAN GUARD, 13 x 14-1/2, Plastic or Wire
Part No. PD56525
$160.00- Fan Guard
- Plastic or Wire
- Used for evaporator fan
- 13-3/8" x 14-1/2"
- Blade 12"
- Used on various Norlake models where part is applicable.
- Screw hole to screw hole (vertical) 8"
- Screw hole to screw hole (horizontal) 15-3/4"
-
-
FAN GUARD, WIRE
Part No. PD26526
$124.20- Fan Guard
- Wire
- Epoxy Coated
- 15-1/2" x 14-1/2"
- Screw Centers
- 15-3/4" x 7-3/8"
- Used on various Bohn Models such as LET065, BT055A, BT055B, 200EM230-1, EM150A, EM157A, EM200A, EM207A, EM250A, EM257A, SM Series, SME Series, UM Series, WK Series, WKE/G Series where part is applicable.
-
FILTER CAP END CAP
Part No. PD52532
$12.83- Please verify model and Job Listing number to order
- Commonly used on Anthony models
-
Filter Drier with Tap
Part No. PD53674
$47.36- 1/4" Connection Size
- Dessicant volume 3
- Overall Length 5.81"
- ODS connection
- Access Test port on inlet side
-
Fitting, Adapter
Part No. PD15122
$45.00- Fitting
- Commonly used on Bohn, Heatcraft, Larkin models and where part is applicable.
-
-
Thermostatic Expansion valve
Part No. PD53022
$131.67- TXV
- 1 Ton
- 3/8" In 1/2" out
- +50 Degree Fahrenheit to -10 Degree Fahrenheit
- Male Flare 90 Deg inlet x Male Flare Outlet
- 3.3/4 H
- Element Size 43
- Capillary Length 30"
- Use with Refrigerants R22, R407A, R407C
-
VALVE, EXPANSION 3/8 X 1/2" SWEAT
Part No. PD30135
$164.01- Medium Temp
- +50 Degrees F to -10 Degrees
- 3/4 to 1-1/2 Ton
- 3/8 Inlet
- 1/2" outlet
- 1/4" ODF equalizer
- 30" Capillary
- Height 3.76"
- Width 5"
- Used on R22, R407A, R407C Systems