Edlund Models #1 and #2 are the “old reliables.” These are the original manual can openers. They feature an improved finish and a rust-resistant arbor, a plastic bushing for lower turning force and easier opening, and a base with plastic insert for longer plating life. From knife blades and holders to handles, KitchenStuff carries replacement parts for Edlund Models 1 & 2.

17 Part(s)

Set Descending Direction
per page
  1. Arbor, For Model #1

    Part No. PD15335

    $29.70
    • Arbor
    • 4-7/8" x 1/2"
    • Blackened rod
    • Plastic
    • for Edlund model #1
  2. BASE ASSEMBLY #2, 8, 2S

    Part No. PD128254

    $67.20
    • Base Assembly
    • Comes With Warning Label & 3 Screws
    • 7-1/2" Length x 4" width
    • Steel
    • Nickel-plated steel
    • Comes with stainless steel screws and nuts
    • Commonly used on various Edlund models such as: 2, 2S, 8, 25 and where part is applicable. 
  3. Base for Model #1, Steel, Chrome

    Part No. PD128253

    $54.88
    • Base Assembly
    • Plated steel
    • Comes with warning label & 3 screws
    • Chrome
    • with base insert
    • For Edlund Model such as 1, 1S, S-11 and where applicable.
    • (old iron cast base NLA)
  4. BUSHING

    Part No. PD40821

    $12.00
    • Bushing
    • 1/2" Depth
    • 1" Outer Diameter
    • 7/16" inner diameter
    • Commonly Used on Edlund Model: #2, 2S, G-2 and where part is applicable.
  5. CAN OPENER CLEANING BRUSH

    Part No. PD27294

    $56.84
    • Brush, Wire
    • Commonly used on Edlund models such as: 1,2,15,2S, G-2, S-11, U-12, U-12L and where part is applicable.
  6. Edlund Can Opener Parts, Model 1 Kit

    Part No. PD17430.5A

    $61.04
    • Edlund Style Can Opener Replacement Parts Kit
    • Model 1
    • 6 Sets
    • For Edlund Model: #1, Includes 6 each:
      • Gear
      • knife
      • knife support
      • screw
      • washer
  7. Edlund Repair Kit, Model #2

    Part No. PD46770

    $38.74
    • Gear
    • 5/19" Depth
    • 15/16" outer diameter
    • Steel 
    • Commonly Used on Edlund Model: #2, 2S and where part is applicable.
  8. GEAR, MODEL #1

    Part No. PD17430.5

    $29.01
    • Gear
    • For Edlund Model: #1
  9. GEAR, #2

    Part No. PD17431

    $38.74
    • Gear
    • 5/19" Depth
    • 15/16" outer diameter
    • Steel 
    • Commonly Used on Edlund Model: #2, 2S and where part is applicable.
  10. KNIFE BLADE, #2

    Part No. PD18136.5

    $25.20
    • Knife
    • Length 1-5/8"
    • Width 5/8"
    • Center of hole to center of hole is 7/16"
    • Commonly ssed on Edlund models: #2, 2S
  11. KNIFE HOLDER #2

    Part No. PD127786

    $25.20
    • Knife Holder
    • Commonly Used on Edlund Model: #2
  12. Knob

    Part No. PD126904

    $16.50
    • Knob
    • 2" diameter x 1-3/4" high
    • 5/16" bore
    • Commonly used for Edlund models such as :1, 1S, 2, 2S, 8, S-11 and where applicable.
  13. RIVET FOR KNIFE HOLDER

    Part No. PD19333

    $6.60
    • Rivet
    • 1-1/2" Length
    • 1/4" Outer Diameter
    • Commonly used on Edlund Model models such as: #2, 2S and where part is applicable.
  14. SCREW FOR KNIFE BLADE

    Part No. PD19871

    $290.38
    • Screw for Knife Blade
    • Requires 2
    • 12-24 x 7/16
    • Commonly used on Edlund Models: #1, #2
  15. SPRING

    Part No. PD127714

    $22.05
    • Spring
    • 2-1/8" Length
    • 3/4" Outer
    • Steel
    • Commonly used on various Edlund models such as: #1 and where part is applicable.
  16. SUPPORT, KNIFE

    Part No. PD127800

    $290.38
    • Knife Support
    • For Model #1
  17. WASHER, SPRING

    Part No. PD127799

    $12.25
    • Spring Washer
    • 1-3/32" Outer Diameter
    • Steel
    • Commonly used on various Edlund models such as: #1 and where part is applicable.

17 Part(s)

Set Descending Direction
per page