Burners & Accessories by Factory
-
Air Mixer, Open Burner, 2-1/4"" O.D.
Part No. PD41273
$9.76- For cast iron burner
- Air Shutter
- Twin plate
- s slot
- Fits .463 orifice
- 2-1/4 OD
-
-
Air Shutter - 2-1/8" OD
Part No. PD127224
$18.68- Air Shutter - 2-1/8" OD
- , 7/16" Center Hole
- Use on various Bakers Pride Models such as: 50, GG, SGBR, and where part is applicable.
-
AIR SHUTTER KIT
Part No. PD38042
$46.57- Commonly used on US Range and Garland models: GTBG24-AB24, GTBG36-AB36, GTBG48-AB48, GTBG60-AB60, GXHP105, GXHP11, GXHP21, GXHP22, GXHP33, GXHP42, GXHP63, GXHP84, UTBG24-AB24, UTBG36-AB36, UTBG48-AB48, UTBG60-AB60 and where part is applicable
-
AIR SHUTTER- DOUBLE, 2-5/8" OD
Part No. PD127291
$10.57- Air Shutter (For PD127289 & PD127290)
- 2-3/4 " OD
- Fits 2-1/2" Burner
- 7/16" Hole size
- Has locking ears
-
BRACKET, SUPPORT BURNER
Part No. PD127259
$180.59- Burner hanger
- 22" long
- 23" including tabs
- With 2 metal strips 7/8 x 4-3/8"
- Burner Support Bracket (For item numbers PD127252 & PD127253)
- Use for Imperial Hot Plates (Series): IHPA-12, IHPA-24, IHPA-36, IHPA-48: IR that use 2 burners
- For units that use 2 burners
-
BROILER BURNER
Part No. PD10973.3
$286.33- Broiler Burner w/Shield
- H burner
- Natural/LP gas
- Cast iron
- 16-1/4 x 6-3/4"
- Used on various Imperial models: EBA Series and where part is applicable.
-
Burner - Hot Top
Part No. PD127242
$176.88- Burner -Hot Top
- Use for 45-40/50 R, S or T Specto-Heat Hot Tops
- Commonly used on Garland models such as G20-SP, G20-SPH, GF36-6R, GFE36-6C, GFE36-6R, M45R, M45RC, M45S, M45T, M5S, M5T, MST45R, MST45RC, MST45RCE, MST45RE, MST45S, MST45SE, MST45T, MST45TE, MST5S, MST5SE, MST5T, MST5TE and where part is applicable.
-
BURNER ASSEMBLY, FRONT
Part No. PD127277
$162.59- Front Burner Assy
- Includes
- (1) PD127272
- (1) PD127274
- Cast iron
- 2-1/2 center mount
- Head left
- 6" long vneturi from shutter to mounting bolt
- Use for Grills & Ranges : JSRE(3-336 Front & Rear, 3-436 Front, 4-336 Rear); (Series): JGM.JGT, JHP, JHPE, JSR, JTRH
-
BURNER ASSEMBLY, FRONT
Part No. PD127294
$77.76- Front Burner Assy
- Use for Hot Plate (Series): RDHP/RDR
-
BURNER ASSEMBLY, OPEN TOP
Part No. PD127343
$224.00- Wolf Open Top Burner Assy — 19.5" Long Overall (Two PD127341, and Aluminized Steel Venturi)
- Use for CH & CHSS
-
BURNER ASSEMBLY, REAR
Part No. PD127278
$312.38- Rear Burner Assy Includes (1)TB-312 & (1)TB-315
- Use for Grills & Ranges (Series): JHP
-
BURNER ASSEMBLY, REAR
Part No. PD127279
$295.76- Rear Burner Assy Includes (1)TB-312 & (1)TB-316
- Use for Ranges (Series): JTRH JSR
-
BURNER ASSEMBLY, REAR
Part No. PD127295
$108.05- Rear Burner Assy
- Use for Hot Plate (Series): RDHP/RDR
-
Burner Assy, Rear
Part No. PD127235
$120.42- Rear Burner Assy
- Length: 21", 533 mm
- Depth: 3 3/4", 95 mm
- Outer Diameter: 2 1/16", 52 mm
- Color: Black
- Material: Cast Iron
- Orifice Size: 32
- Commonly used on Garland such a : G30, G286, G280 SERIES where part is applicable.
-
Burner H Ported w/Sm Shutter
Part No. PD127239
$139.11- Griddle Burner
- with Air Shutter
- Cast iron
- 20" x 5-3/8"
- H shape
- 16-1/4" burn area
- 17-3/8" leg
- Commonly used on Garland such a : GTGG24-GT24, GTGG36-G36, GTGG36-GT36, GTGG48-G48, GTGG48-GT48, GTGG60-GT60, GTGG72-GT72, Garland, STW286A, UTGG24-GT24, UTGG36-GT36, UTGG48-GT48, UTGG60-GT60, UTGG72-GT72 where part is applicable.
-
Burner, Aluminized Steel, 24"
Part No. PD127165
$2,087.79- Aluminized Steel Burner
- Come with Deflector & Air Shutter
- 23 1/2" Overall
- 1-1/4" air shutter face
- 17-1/2" burner
- 19-3/4" x 4-3/8" shield
- 24-1/4 overall length
- Tubular steel
- Use only for units that have steel burners (some have cast iron)
- Used on various Bakers Pride models such as CH-10, CH-12, CH-14, CH-6, CH-8, XX-10, XX-12, XX-4, XX-6, XX-8 and only where part is applicable.
-
BURNER, BROILER
Part No. PD127305
$724.55- Broiler Burner weld assembly, Hi Glow
- 24-1/2" x 3-1/2"
- Use for Broiler (Series): 32
- Used on various Southbend models such as B32A-3240, B32C-32B, B32D-3240, SSB-32, SSB-36, SSB-45
-
BURNER, BROILER
Part No. PD127332
$212.49- Broiler Burner
- Cast iron
- With deflector and air shutter
- 22,000 BTU
- Length 20-3/4"
- 15-1/4" Burner area
- 16-1/2" X 4-3/8" Shield
- 2.408" Outer diameter.
- Used on various Vulcan Hart models such as VCCB,VCCB-60 and only where part is applicable.
-
BURNER, BROILER - W/SHIELD
Part No. PD127249
$286.33- Broiler Burner w/Shield
- H burner
- Natural/LP gas
- Cast iron
- Angle welded on top
- Cast burner cover included
- 16-1/4 x 6-3/4"
- Used on various Imperial models such as EBA-2223, EBA-3223, EBA-4223 and only where part is applicable.
-
Burner, Broiler, 15-1/2"
Part No. PD127225
$53.05- Broiler Burner
- 15-1/2" Long Overall w/Air Shutter
- Burner 9-1/2"
- Has break off tab
- Use for Broiler (Series): BC, CCB and where part is applicable.
-
-
DCS Air Shutter
Part No. PDG10032
$16.56- Dynamic Cooking System
- Air Shutter (ForTB-364)
- Use for Broiler: Char Rock Broiler 2; Grill: Griddle & Oven: 36-6-1
-
GASKET, BURNER
Part No. PD127227
$26.85- 2-11/16" c 1-1/2"
- Fibre
- TYPE C
- 2" Center mount holes
- .9" Hole in center
-
GASKET, BURNER
Part No. PD127280
$16.70- Burner Gasket
- #915/920
- 3-5/16 X 1-1/8"
- 2.5" center mount holes
- Fibre
- Type C
- Green
- Use for Grills & Ranges (Series): JGM, JGT, JHP, JHPE.JSR, JSRE, JTH
-
GASKET, BURNER
Part No. PD127349
$8.45- Burner head gasket
- 2-11/16 x 1-3/4
- Type C
- Gray
- 2" centers mount holes
- Fiber gasket
- 2" center mount holes
- Commonly used on Vulcan, American Range, Garland and Wolf models where applicable.
-
GASKET, BURNER HEAD (Garland & US Range)
Part No. PD127311
$31.68- Burner Head Gasket
- Open head venturi
- Used on various US Range models such as SP-1855, RHPA, 836 Cuisine, Performer II, PF, RGM, RGTA, RHPA, TR.
- Used on Garland model C2836-75-1 and where part is applicable.
-
HEAD, BURNER
Part No. PD127260
$187.87- Burner Head Only
- prior to 1996
- Use for Ranges (Series): IR Elite (w/Lift-off burner heads)
-
HEAD, BURNER
Part No. PD127273
$136.54- Burner Head, #915
- 5-1/8" x 5-1/8"
- Use for Grills & Ranges : JSRE (3-436 Rear, 4-336 Front); (Series): JGM, JGT, JHPE
-
HEAD, BURNER
Part No. PD127310
$69.06- Burner Head — 5-1/2"
- Used on various Garland models such as: RHPA Range (Series): 836 Cuisine, Performer II & PF; Regal RGM-XXX-2, RGTA & RHPA and where part is applicable
-
HEAD, BURNER
Part No. PD127341
$75.68- Burner Head Pilot holes centered
- 4-1/4" Diameter
- LP or Natural gas
- 2" center mount
- Pilot holes on center , not offset
- cast iron
- Used on various Vulcan hart/wolf models such as AE, AK, CH, CHSS and only where part is applicable.
-
HEAD, BURNER
Part No. PD127342
$190.72- Burner Head
- Cast iron
- Natural/LP gas
- Outside Diameter: 7"
- Inside Diameter: 1-1/8"
- Use for Griddles & Grills: GG, HG, HP, Hi-boy/MTG/ PRO, IRG, STG Range: F, FS
- Vulcan: VO236, VS12F, VS12M, VS12S, VS12T, VS18F, VS18M, VS18S, VS18T, VS24F, VS24M, VS24S, VS24T, VS36F, VS36M, VS36S, VS36T
-
HEAD, BURNER, OCTAGON
Part No. PD127272
$78.28- Burner Head
- Cast iron
- #920
- 6-1/4" x 6-1/4"
- 2-1/2" centers
- 8 sides, Octagon
- Flat side to flat side 5-15/16"
- Bottom raised slot
- (does not include gasket)
- Use for Jade Grills & Ranges (Series): JGM, JGT, JHP, JHPE, JSR, JSRE, JTRH
-
HEAD, BURNER, OLD STYLE 6
Part No. PD127226
$142.71- Burner Head
- Cast Iron
- 6" Diameter
- 2" Centers for venturi screws 10-24 X 3/4"
- Used on various Connerton models such as CHP series and only where part is applicable.
-
Imperial 3 Ring Burner Assembly
Part No. PDG11485
$292.74- 3 Ring Burner Assy
- Use for Ranges (Series): ISPA & Tempura
-
Imperial Burner Gasket
Part No. PD31158
$4.50- Dimensions are 2-11/16" x 1-1/2"
- 2" centers mount holes, .9" center hole
- Burner Gasket (For TB-270 & TB-281)
- Commonly used on models IHPA-12, IHPA-24, IHPA-36, IHPA-48, IHR, IHR-6-C, IHR-G24-2-C
-
Jet Burner Natural Gas, 9" Dia, 23 Jets
Part No. PD127264
$311.88- Jet Burner
- Cast Iron
- 100,000 BTU
- Natural gas
- 9" Diameter
- 23 Jets
- 1/2" FPT inlet
- (no pilot)
- Use for Ranges (Series): ICRA, ISP-J; Models such as ICRA-1, ICRA-2, ICRA-3, ICRA-4, ICRA-5, IR-24, IR-36, IR-4-S18, IR-48, IR-6, IR-60, IR-72, ISP-J-SP, ISP-J-SP2, ISP-J-W13, ISP-J-W16 and where part is applicable.
-
KEY PLATE COVER
Part No. PD127244
$51.84- Key Plate Cover
- Outside Dia = 7-5/8"
- Commonly used on Garland models such as 45-40/50 R, S or T and where part is applicable.
-
KEY PLATE RING
Part No. PD127245
$95.46- Key Plate Ring
- Outside Dia = 10-3/4"
- Commonly used on Garland models such as 45-40/50 R, S or T and where part is applicable.
-
-
-
-
RADIANT, S/S - RIGHT
Part No. PD127336
$71.48- Radiant
- Stainless steel
- with holes
- 9-1/4" Long
- with rolled edge towards burner center
- Large hole nearest front of burner and other large hole about 1-3/4" from end of shield end of shield near rear of burner.
- Used on various Vulcan hart /Wolf models such as RB-36, 36SB, 36SB-ML-135142, 36SBI, 36SBI-ML-135143, VSB26I, VSB34IR, VSB34R, VSB36, VSB36-ML-135142, VSB36I, VSB36I-ML-768188, VSB36IR, VSB36IR-ML-044936, VSB36R, VSB36R-ML-44935 and only where part is applicable.
-
Rankin-Delux Jet Burner ? LP
Part No. PDG11067
$211.50- Jet Burner -LP
- 9" Diameter
- 23 Brass Jets
- Cast Iron
- 1/2" FPT Inlet
- 100,000 BTU
- Used on various Rankin Delux models and only where part is applicable.
-
-
Rankin-Delux Venturi Only ? Rear
Part No. PDG11064
$135.60- Venturi rear Only
- 18-1/2" Length
- Cast Iron
- Holes 2" centers
- Used on various Rankin Delux models such as RDHP, RDR and only where part is applicable.
-
Star Burner Head only old style 6
Part No. PDG11148
$142.59- Burner Head
- Cast Iron
- 6" Diameter
- 2" Centers for venturi screws 10-24 X 3/4"
- Used on various Star models such as 602AH, 602H-SU, 602HD, 602HD-LP, 602HD-SU, 602HDS, 602HF, 602HF-LP, 602HF-SU, 602HW, 602HWD, 602HWD-LP, 602HWF, 602HWWF, 603HWF, 603HWWF, 604H, 604H-SU, 604HD, 604HD-LP, 604HD-SU, 604HF, 604HF-LP, 604HF-SU, 606H, 606H-SU, 606HD, 606HD-LP, 606HD-SU, 606HF, 606HF-SU, AMHP2, AMHP4, AMHP6, TMHP2, TMHP4, TMHP6 and only where part is applicable.
-
TIP ONLY, JET - LP gas
Part No. PD127271
$23.74- Jet Tip Only (For PD127265 & PD127267)
- LP gas
- Brass
- 4 air holes
- Use for Ranges (Series): ICRA ISP-J Models: ICRA-1, ICRA-2, ICRA-3, ICRA-4, ICRA-5, ISP-J-SP, ISP-J-SP2, ISP-J-W13, ISP-J-W16
-
-
TIP, DUCK JET - NAT
Part No. PD127269
$27.09- TIP, DUCK JET - NAT
- Commonly used on Imperial models such a : ICRA-1, ICRA-2, ICRA-3, ICRA-4, ICRA-5, IHR Diamond, IHR-6-C, IHR-G24-2-C, ISP-J-SP, ISP-J-SP2, ISP-J-W13, ISP-J-W16 and where part is applicable.
-
U.S. Range Venturi Only ? Rear
Part No. PDG10313
$72.90- Rear Venturi
- 18-1/2" L
- Cast Iron
- Holes 2" centers
- Used on Various Garland models such as RHPA.and only where part is applicable.
-
VENTURI, CAST IRON - REAR
Part No. PD127256
$115.04- Venturi rear Only
- 18-1/2" Length
- Cast Iron
- Holes 2" centers
- Used on various imperial models such as IHPA-12, IHPA-24, IHPA-36, IHPA-4-18, IHPA-4-24, IHPA-48, IR-24, IR-36, IR-4-S18, IR-48, IR-6, IR-60, IR-72, IR24, IR60, IR72 and only where part is applicable.
-
-
-
Venturi, Cast Iron-Front, Short
Part No. PD127243
$57.68- Short Cast Iron Venturi Only
- Front
- Commonly used on Garland models such as GXHP105, GXHP11, GXHP21, GXHP22, GXHP33, GXHP42, GXHP63, GXHP84, SP-1844-2F, SP-1844-2S and where part is applicable.
-
VENTURI, FRONT OPEN BURNER
Part No. PD127261
$135.05- Venturi Only
- Front
- 8-1/2" long
- 2-1/8" diameter
- Use for Ranges (Series): IR Elite (w/Lift-off burner heads)
- Used on models such as IHPA-12, IHPA-24, IHPA-36, IHPA-48, IR-2000-24, IR-2000-36, IR-2000-48, IR-2000-60, IR-2000-72, IR-24, IR-36, IR-48, IR-60, IR-72 and where part is applicable.
- (Most models made after 1996)
-
VENTURI, REAR OPEN BURNER
Part No. PD127262
$161.57- Cast Iron Rear Venturi Only
- Length 20 3/8"
- Use on various imperial models such as IHPA-12, IHPA-24, IHPA-36, IHPA-4-24, IHPA-48, IR-24, IR-36, IR-4-S18, IR-48, IR-60, IR-72, IR2000-24, IR2000-36, IR2000-48, IR2000-60, IR2000-72, IR24, IR60, IR72 and where part is applicable.
-
-