Motors and Related Parts
-
ASSEMBLY, MOTOR & BLOWER, CW
Part No. PD18608
$1,655.41- Motor and Blower Assembly
- Service kit
- 208/230V
- 60HZ
- 1600 RPM
- Clockwise rotation (CW)
- Commonly used on various BLODGETT models such as: MT32, MT70PH, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870G, MT3870-CE and where part is applicable.
-
Axial Fan - 115V, CFM 110
Part No. PD18590
$107.97- Axial Fan - 115V
- Commonly used on various BLODGETT models such as: B48D-GGGG, BP-100, BP-50, MG-32, MG3270, MT1828E, MT1828G, MT2136E, MT2136G, MT3240E, MT3240G, MT3255G, MT3855G, MT3870 and where part is applicable.
- 4-11/16" x 1-1/2"
- 120V
- 102 CFM
- 2900 RPM
-
BELT, VEE BOB, 63"
Part No. PD81557
$183.20- Timing V Belt
- Vee Bob
- Non notched
- Oil and heat resistant
- Static conductive
- Outside length 63"
- 1/2" top width
- 5/16" thick
- Fabric cover
- Polyester cords
- Rubber body
- Temperature range -22° to 194° F
- Commonly used on Blodgett models such as XR8E, XR8G and where applicable.
-
Blower Assembly, Complete, 60HZ
Part No. PD130838
$1,490.28- Blower Assembly
- 60HZ
- Commonly used on various BLODGETT models such as: MT3240E, MT3240G and where part is applicable.
-
BLOWER MOTOR ASSEMBLY, CW
Part No. PD18624
$610.47- Blower Motor
- CW Rotation, CCW when locking ast the blower wheel
- 208/230V
- 3250/2700 RPM
- 50/60 HZ
- .56 amp
- 13-1/2" Wire leads (Black & white)
- 1/4" Insulated female terminals
- Capacitor has brown leads.
- Commonly used on various Blodgett Models such as MT1820, MT1820E, MT1828, PS250E, PS520, PS520E, PS520G, S1820E and only where part is applicable.
-
BLOWER MOTOR ASSEMBLY, CW
Part No. PD54004
$394.26- Blower Motor
- CW Rotation
- 208/230V
- 50/60 HZ
- Commonly Used on Blodgett Models such as S1828E and where part is applicable.
-
BLOWER MOTOR, 1/4 HP, 1SP, 208-230V
Part No. PD124289
$726.59- Blower Motor
- 1/4 HP
- 1 Speed
- 208/230V
- 60hz
- 2.2amp
- 1725 RPM
- CW Reversible Rotation
- 5/8 x 2-5/8 Shaft
- 1 Phase
- Commonly used on various Blodgett models such as CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, ZEPHAIRE 50E and where part is applicable.
Some original ovens used a Dayton 1/2 HP motor. This motor replaces it
-
BLOWER MOTOR, 1/4 HP, 2 SPD New Style *
Part No. PD29887
$852.26- Blower Motor
- 208/240 Volts
- 2 Speed
- 1/4 HP
- 1725/1140 RPM
- CW Rotation
- 1 Phase
- Commonly used on various Blodgett models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTB1, CTBR, CTBR POPEYES, CTBR-AP, CTBR-G, CTBR-GFB and only where part is applicable.
-
BREAKER, CIRCUIT 4 AMP
Part No. PD131100
$117.60- Thermal Circuit Breaker
- Rating 4 A
- 240 VAC
- 48 VDC
- 1 pole
- Operating temperature 68° - 140° F
- Snap in mount
- 11mmH x 27.6mm L x 19mm W
- Commonly used on Blodgett MT series models where applicable.
-
BRUSH SET
Part No. PD128248
$124.64- Brush Set
- 2 Brushes
- Set of Brushes Includes 2 Brushes, 2 Springs, 2 Caps
- Used on various Blodgett models such as MT2136E, MT2136G, MT3255, MT3855G, MT3870, BE3240, PS540E, PS540G, and where part is applicable.
- (not for these models if your motor has been replaced with the retro kit motor)
-
BURNER, BLOWER COMBUSTION
Part No. PD18588.1
$424.94- Motor only
- w/ blower wheel
- Black metal
- Wire leads
- Commonly Used on Blodgett Models such as MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
-
CAPACITOR, 2 SPEED MOTOR
Part No. PD413675
$145.98- Capacitor
- External mount
- 370V AC
- 10.0 Microns
- For 2 Speed Motors
- 8 Tab Terminals 1/4"
- 4" x 1-3/4" x 1-1/2"
- Commonly used on various Blodgett models such as DFG-100 XCEL, DFG-100, DFG-200, SHO, SHO-100G, SHO-G, SHO SERIES, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.
-
Capacitor, Supressor
Part No. PD51450
$72.57- Capacitor, suppressor
- Commonly used on various BLODGETT models such as: COS-6AA, BCS-6, COS-101, COS-101S, COS-201NSF, COS-201NSF, COS-20, COS-20E, COS-20NSF, COS-6, COS-6NSF and where part is applicable.
-
CONTROL BOARD & DRIVE MOTOR, RETRO KIT
Part No. PD128233
$2,100.04- Retro Kit
- Control Board & Drive Motor Kit
- New Style
- Brushless motor
- Commonly used on various BLODGETT models such as B48D-GGGG, MT70PH, MT1820E, MT1828G, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT2136E, MT2136G, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270 (After 9/90), MT3270E, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
To change the direction of motor: There is a two-position Jumper marked P1 on the control board. The center pin is common so simply Identify the P 1 and pull the jumper off and put it on the other position to change belt direction.
NOTE: NOT applicable to MG-32 or MG3270. MG-32 or MG3270 must use PD140444.
-
CONTROL FOR BRUSHLESS DC MOTOR
Part No. PD26584
$1,234.89- Conveyor Motor Control, brushless
- The brushless control does NOT have fuses on it. If yours does you DO NOT have a brushless control and this control will not work.
- You must have installed the brushless kit before you can use this control.
- Commonly used on Blodgett models: MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
- Conveyor Motor Control, brushless
-
CTB UPGRADE MOTOR KIT
Part No. PD57049
$529.68- Motor kit
- Upgrade for CTB models
- 230 volt
- 1 PH
- 1/3 HP
- 1 speed
- Commonly used on various Blodgett models such as CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-1, CTB-AP, CTBR, CTBR POPEYES, CTBR WENDYS, CTBR-AP, ZEPHAIRE 50E and where part is applicable.
-
Drive Motor, Blodgett, Conveyor 90V DC
Part No. PD38688
$1,245.01- Conveyor Driver Motor
- 90V
- Replaces Bodine style motor
- On units before 9/1990
- Commonly used on Blodgett models: MG-32, MG3270
- This is not a replacement kit, motor only
- Non returnable, call if you have questions prior to purchase.
-
GEAR SET
Part No. PD173430
$1,637.02- Commonly used on various BLODGETT models such as: 100DS-KLS, 100DS-KLT, 100DS-KPS, 100E-KLS, 100E-KLT, 20DS-KLS, 20DS-KLT, 20DS-KPS, 20DS-KPT, 20E-KLS, 20E-KLT, 20E-KPS, 20G-KLT, 30DS-KLS, 30DS-KLT, 30DS-KPS, 30DS-KPT, 30E-BLT, 30E-KLS, 30E-KLT, 30G-BLT, 40DS-KLS, 40DS-KLT, 40DS-KPS, 40DS-KPT, 40E-BLT, 40E-KLS, 40E-KLT, 40G-BLT, 40G-KLT, 60DS-KLS, 60DS-KLT, 60DS-KPS, 60DS-KPT, 60E-KLS, 60E-KLT, 60G-KLT, 80DS-KLS, 80DS-KLT, 80DS-KPS, 80DS-KPT, 80E-KLS, 80E-KLT, KPS-E100, KPS-E30, KPS-E40, KPS-E60, KPS-E80 and where part is applicable.
- Commonly used on various BLODGETT models such as: 100DS-KLS, 100DS-KLT, 100DS-KPS, 100E-KLS, 100E-KLT, 20DS-KLS, 20DS-KLT, 20DS-KPS, 20DS-KPT, 20E-KLS, 20E-KLT, 20E-KPS, 20G-KLT, 30DS-KLS, 30DS-KLT, 30DS-KPS, 30DS-KPT, 30E-BLT, 30E-KLS, 30E-KLT, 30G-BLT, 40DS-KLS, 40DS-KLT, 40DS-KPS, 40DS-KPT, 40E-BLT, 40E-KLS, 40E-KLT, 40G-BLT, 40G-KLT, 60DS-KLS, 60DS-KLT, 60DS-KPS, 60DS-KPT, 60E-KLS, 60E-KLT, 60G-KLT, 80DS-KLS, 80DS-KLT, 80DS-KPS, 80DS-KPT, 80E-KLS, 80E-KLT, KPS-E100, KPS-E30, KPS-E40, KPS-E60, KPS-E80 and where part is applicable.
-
-
KIT, BLOWER MOTOR & KEY
Part No. PD46694
$1,039.74- Motor Kit
- W/ key
- Used on various Blodgett models such as BC-20E, BC-20G, BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G, HV-100E, HV-100G and where part is applicable.
-
KIT, COMBUSTION BLOWER 1828G
Part No. PD130523
$352.37- Blower Motor
- Combustion
- CE
- 50HZ
- Commonly used opn Blodgett model MT1828G, MT1828E and where applicable.
-
KIT, SERVICE BLOWER CCW ASSEMBLY
Part No. PD140358
$1,655.41- Blower Assembly Kit
- Complete
- CCW
- Service kit
- Commonly used on various BLODGETT models such as: MT32, MT70PH, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870G, MT3870-CE and where part is applicable.
-
LIFT KIT ASSY, (ACTUATOR) 115V
Part No. PD174413
$3,182.29- Lift Kit Assembly
- 120V
- 4" High
- 13.55" Width
- 20.95" Length
- Ball drive actuator assembly
- Includes:
- motor actuator shield
- 220V motor
- motor cover
- Commonly used on various BLODGETT models such as: 30E-BLP, 30G-BLP, 40E-BLP, 40G-BLP, BLP-E, BLP-G and where part is applicable.
-
Motor & Blower Assembly, CCW Export
Part No. PD26508
$1,075.38- Motor & Blower Assembly
- CCW Rotation
- For Export Models Only
- Commonly used on Blodgett models such as MT3255, MT3255E, MT3255G, MT3270, MT3855G, MT3870 and where part is applicable
-
MOTOR & CONDUIT ASSY KIT
Part No. PD174706
$2,154.98- Motor and Conduit Assembly Kit
- Commonly used on various BLODGETT models such as: FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10 and where part is applicable.
-
MOTOR & SEAL KIT
Part No. PD48010
$832.82- Motor and Seal Kit
- 208/240V
- 60HZ
- 1720 RPM
- Shaft Size- 4-3/4" x 5/8"
- Used on various Blodgett models such as XCEL-50EC and where part is applicable.
-
MOTOR 1/6HP 208-230V 60/50HZ 1SP
Part No. PD38235
$1,573.53- Motor
- 1/6hp
- 208/230v
- 50/60hz
- 1sp
- Commonly used on Blodgett models such as KCO-25E and where part is applicable
-
-
MOTOR KIT, 1 OR 2 SPEED 1/3HP 208-240V
Part No. PD11507
$1,111.56- Blower Motor
- NOTE: 200-240V
- 50/60hz
- 1 Phase
- 1 or 2 Speed
- 1/3 HP
- Shaft diameter 5/8"
- 1725/1140 RPM
- J56Z frame
- 5/8 x 3-1/4 shaft
- Commonly used on various Blodgett models such as DFG-50, EF Series, EF-111, EZE Series, FA Series, FA100, FA200, FA300, GZL Series, GZL-10, Mark V, Mark V KFC, Mark V Series, Mark V XCEL Series, Mark V-100, Mark V-200, Mark V-IIIH, Mark V-IIIHD, RE Series, SHO-100E, SHO-E, Zephaire 240E Plus, Zephaire E, Zephaire 100E, Zephaire 200E and where part is applicable.
-
MOTOR KIT, 1/2 HP proior to 4-2004
Part No. PD44958
$1,943.46- Motor kit
- 115V
- 1PH
- 1/2 HP
- 2 speed
- For units prior to 4-2004
- For various Blodgett models such as the DFG-100 XCEL and where part is applicable.
-
Motor Kit, 115/230V 1/3Hp
Part No. PD37445
$1,145.19- 115/230 Volt
- 1/3 Horsepower
- 1PH
- 1725/1425 RPM
- Single Speed
- 1/2 x 4-1/4" shaft
- Counter clockwise rotation
- Commonly used on various BLODGETT models such as: DFG-50, DFG-50 POPEYES and where part is applicable.
-
MOTOR MOUNT PANEL DFG/ZEPH
Part No. PD174732
$445.16- Motor Mount Panel
- Commonly used on various BLODGETT models such as: DFG-100, DFG-200, SHO SERIES, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.
-
MOTOR SHAFT SEAL
Part No. PD50399
$69.03- Shaft seal
- Commonly used on various BLODGETT models such as: COS8E/AA, B14-G, BC-20E, BC-20G, BC14E, BC14G SERIES, BCS-6, BCS-8E, BCS-8G, BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, BX-14G, CNV-14E, CNV-8E, CNV-8G, CNVX-14, CNVX-14E, CNVX-14G, COS-101, COS-101S, COS-20E, COS-20G, COS-5H, COS-5HA, COS-5HB, COS-6, COS-8E, COS-8EDS, COS-8G, COS-8GDS, HV-100E, HV-100G, HV-50E, XCEL-50EC and where part is applicable.
-
MOTOR, 1/2 HP,SHO
Part No. PD174738
$1,183.25- Commonly used on various BLODGETT models such as: SHO, SHO SERIES, SHO-100G, SHO-G and where part is applicable.
-
MOTOR, 1/2HP-115/230V 20E
Part No. PD50393
$1,731.06- Motor
- 1/2 Horsepower
- 115-230 Volt
- Commonly used on various BLODGETT models such as: B14G, BC14E, BC14G, BC20G, BCS-8E, BCS-8G, CNV-14E, CNV14G, CNV-8E, CNV-8G, COS-101, COS-101S, COS-20E, COS-20G, COS-8E, COS-8EDS, COS-8G, COS-8GDS and where part is applicable.
-
MOTOR, 1/3HP 480V 3PH 8E
Part No. PD39178
$1,827.53- Motor
- 1/3hp
- 480v
- 3ph
- Commonly Used on Blodgett models such as BCS-6, BCS-8E, CNV-8E, COS-101, COS-101S, COS-5H, COS-5HA, COS-5HB, COS-6, COS-8E, COS-8EDS and where part is applicable
-
MOTOR, 1/4 HP 230V 60HZ 1SP MG
Part No. PD18567
$1,314.70- Motor
- 1/4 hp
- 230V
- 1 phase
- 1 speed
- 60HZ
- Commonly used on Blodgett models such as MG3270, MG32 and where part is applicable.
- The old part number was a 1/3 hp motor, now its 1/4 hp.
- Motor
-
MOTOR, 115V (NBK) After 4-2004
Part No. PD36362
$1,307.15- Motor with Conduit
- (old style)
- 115V
- 2 Speed
- 5/8" x 5" shaft w/2 flats
- 6-1/4" centers on mounting holes 3/4"
- Armored cable
- For Units after to November 5, 2005
- Used on various Blodgett models such as AC-500 XCEL, B36N-GRAD, BDO-G, BE2136, BG2136, DFG-100 XCEL, SHO-G, SHO, SHO SERIES, SHO-100G, SHO-G and where part is applicable.
Verify serial number and date of manufacture. If not provided then this item is nonreturnable.
-
MOTOR, 2-SP, 1/3-HP, 115V, 1PH
Part No. PD11508
$1,120.41- New Style Blower Motor
- 115-220V
- 1/5 HP
- 1 ph
- 1710-1120 RPM
- 60 HZ
- 5.9/2.7 amp
- CW rotation
- 5/8 x 3-1/4 shaft length
- 2 speed
- Commonly used on various BLODGETT models such as: DFG-100, DFG-200, FA Series, GZL Series, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE-100-G, ZEPHAIRE-200-GZL, and where the part is applicable.
-
MOTOR, 230V 2SP W/SWITCH CTB
Part No. PD174747
$1,145.19- Motor
- 230V
- 2 Speed
- With Switch
- Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB-AP, CTB SERIES, CTB XCEL, CTB1, CTBR, CTBR POPEYES, CTBR-AP, CTBR XCEL and where part is applicable.
-
MOTOR, 240V 50HZ 1PH HANNING
Part No. PD174749
$2,370.03- Motor
- 240V
- 50HZ
- 1PH
- Hanning
- Commonly used on Blodgett models where part is applicable.
-
-
MOTOR, 460-480V, 3PHASE
Part No. PD41583
$3,663.02- Blower motor
- 440/480V
- 3PH
- Commonly used on various BLODGETT models such as: COS-101, COS-101S, COS-101SNSF, COS-201NSF, COS-20, COS-20E, COS-20NSF and where part is applicable.
-
MOTOR, BLOWER 208/240V 3PH
Part No. PD19207
$3,640.89- Motor
- 208/240V
- 3 Phase
- 4 Bolt mount
- Open frame
- Commonly used on various BLODGETT models such as: BCS-6, COS-101, COS-101NSF, COS-101S, COS-101SNSF, COS-201NSF, COS-20, COS-20E, COS-20NSF, COS-6, COS-6NSF and where part is applicable.
-
MOTOR, BLOWER CCW 230/208V 50/60
Part No. PD130886
$1,690.07- Motor & Blower Assembly
- Service kit
- 208/230V
- 50/60HZ
- Counter clockwise direction (CCW)
- 1/3 HP
- 1600 RPM
- Commonly used on Blodgett models such as MT3855G (MT3855G) after 2/27/1994.
- Used quantity of 3 Prior to 2/27/1994. Use PD18609
-
Motor, Brushless
Part No. PD61249
$1,698.77- Motor only
- Brushless
- Confirm with serial number for correct part
- Commonly used on Blodgett models such as: MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT2136E, MT2136G, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
Note: Motor only, if changing from old style motor with brushes, you will need to install kit PD128233
-
-
MOTOR, CONVEYOR RH SHIFT W/LIT
Part No. PD131077
$2,773.84- Conveyor drive motor
- Baldor
- Right hand angle shaft
- Commonly used on Blodgett models: MG32, MG3270
-
MOTOR, GEAR 1/50HP 1350:1 Blodgett
Part No. PD140296
$923.94- Conveyor Drive Motor
- This is the new style 1350:1 universal motor kit
- 1/50HP
- 1350:1 ratio
- Commonly used on Blodgett conveyor ovens such as BE3240 where part is applicable.
-
MOTOR, OLD AC500 3/4HP 115V
Part No. PD174758
$4,237.38- Commonly used on various BLODGETT models such as: AC-500 and where part is applicable.
-
PROTECTOR, MOTOR MPS 1.0
Part No. PD175557
$973.50- Motor Protector
- Commonly used on Blodgett models such as BCS-6, BCS-8DS, BCS-8E, CNV-8E, COS-101, COS-101S, COS-5H, COS-5HA, COS-5HB, COS-6, COS-8E, COS-8EDS, COS-8GDS and where part is applicable
-
PULLEY, 3.25A x 1/2", BOB
Part No. PD175564
$88.50- Pulley
- 3.25a x 1/2"
- 4" x 4.15" x 1.25"
- Commonly used on various BLODGETT models such as: XR8E, XR8G and where part is applicable.
-
PUMP, 24VDC PERISTALTIC
Part No. PD175572
$380.12- Pump
- 24VDC
- Commonly used on Blodgett models such as: BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, CNVX-14, CNVX-14E, CNVX-14G, XCEL-50EC and where part is applicable.
-
RELAY & SCREWS, MOTOR RE
Part No. PD175686
$492.95- Relay, Motor W/Screws
- 240V
- DPDT
- Used on various Blodgett models such as MARK V, MARK V SERIES, MARK V-100, MARK V-200, RE SERIES and where part is applicable.
-
Rope and Plate Assembly, Packing Motor
Part No. PD19402
$241.61- Packing Motor Rope and Plate Assembly
- Commonly used on various BLODGETT models such as: BCS-6, COS-101, COS-101NSF, COS-101S, COS-101SNSF, COS-201NSF, COS-20E, COS-20G, COS-20NSF, COS-6, COS-6NSF and where part is applicable.
-
TANGENT DRAW-OFF VALVE, 1-1/2"
Part No. PD81727
$761.10- Kettle Draw-Off Valve
- 1-1/2"
- Stainless Steel
- No handle
- This Valve must be brazed to unit.
- Used on various Blodgett models only where part is applicable.
-
WIRE GUARD (AXIAL FAN)
Part No. PD173481
$31.86- Wire Fan Guard
- 4-1/8" center mount holes
- Commonly used on various BLODGETT models such as: B36N-HHH, BCS-6, BCS-8DS, BCS-8E, BCS-8G, BCX-14, BCX-14E, BCX-14G, BDO-100G-ES, BDO-G, BX-14, BX-14E, BX-14G, CNV-8E, CNV-8G, CNVX-14, CNVX-14E, CNVX-14G, COS-5H, COS-6, COS-8E, COS-8EDS, COS-8G, COS-8GDS, DFG-100 ES, DFG-200 ES, MG-32, MG3270, MT2136E, MT2136G, MT3255G, MT3270E, SG2136E, SG2136G and where part is applicable.