Ignitors, Flame Switches, Temp Probes
-
-
CONTROL, IGNITION MT1828
Part No. PD130487
$316.81- Ignition Control
- 24V Direct spark
- 0 pre-purge
- 3 trials @ 5 minute intervals
- 4 second retry
- Includes rajah spark adapter and instructions
- Commonly used on Blodgett models such as MT1828 and where part is applicable.
Original module was blue Johnson Control but is now black Baso Control.
-
FLAME SENSOR
Part No. PD27270
$178.77- Flame Sensor, Probe
- Commonly used on Blodgett model AC-500 and where part is applicable.
-
Flame Sensor Wire Assembly, 36 White
Part No. PD11261
$23.90- Ignition Wire Assembly
- White or Orange
- 36"
- Commonly used on various Blodgett models such as: BDO-100-G-ES, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, DFG-50, DFG-50 POPEYES, DFG100, DFG50, MT3255G, MT3270E, MT3870, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE-100-G, ZEPHAIRE-100-G-ES, ZEPHAIRE-200-G, ZEPHAIRE-200-G-ES and where part is applicable.
-
HARNESS, MEAT PROBE
Part No. PD173603
$84.96- Meat Probe Harness
- Commonly used on various BLODGETT models such as: CNV-8E, CNV-8G, COS-5H, COS-5HA, COS-5HB, COS-6, COS-8E, COS-8EDS, COS-8G, COS-8GDS and where part is applicable.
-
IGNITER SHIELD & SCREW
Part No. PD81172
$57.82- Igniter Shield Bracket
- Metal
- Used on various Blodgett models such as DFG-100, DFG-200, DFG100, SHO-100G, SHO-G where applicable.
-
IGNITION MODULE
Part No. PD33801.1
$405.33- Direct spark ignition
- The replacement may not have the light blue cover that the original part had.
- Used on various Blodgett models such as: AC-500 XCEL, DFG100-XCEL, SHO-G and where part is applicable.
-
Ignition Module
Part No. PD39281
$280.95- Ignition module
- 120v DSI 3Try 0PP 4TFI Potted
- Ignition Time 4 Seconds
- Ambient temp -40 F to +175 F
- Commonly used on various BLODGETT models such as: 30G-BLT, 40G-BLT, 5G-SN, BLG-30G, BLG-40G, KLS-100G, KLS-80G, KLT-12G, SC-10G, SC-16GH, SC-7G, SN-5G, SN-G and where part is applicable.
-
IGNITION MODULE, FENWAL HV100G
Part No. PD840527
$315.06- Ignition Module
- 24V AC input
- Commonly used on various Blodgett models such as BDO-100-G-ES, BDO-G, DFG-100-ES, DFG-200-ES, HV-100G, HVH-100G, ZEPHAIRE-100-G-ES, ZEPHAIRE-200-G-ES and only where part is applicable.
-
Ignition Wire Harness, 90? Plug
Part No. PD61795
$50.59- Resistive Ignition Wire Harness
- Spark plug style
- Orange
- 33"
- 90 degree boot x 1/4" F insulated push-on
- From Control to Pilot Assembly
- D1XL
- Commonly used on Blodgett models such as BC-20G, DFG-100 XCEL, XR8E, XR8G and where part is applicable.
-
IGNITOR CABLE
Part No. PD173927
$332.10- Commonly used on various BLODGETT models such as: 30G-BLP, 40G-BLP, BCH-30G, BCH-40G, CB-G, KLS-20G, KLS-40G, KLS-60G and where part is applicable.
-
IGNITOR KIT
Part No. PD34108.24
$91.16- Ignitor Kit
- Commonly used on Blodgett models such as AC-500 XCEL, DFG-100 XCEL and where part is applicable.
-
Ignitor Upgrade Kit SHO
Part No. PD33800.1
$91.16- Upgrade Kit
- Ignitor upgrade
- Use on various various Blodgett models such as: SHO-G, SHO SERIES, SHO-100G, SHO-G and where part is applicable.
-
IGNITOR W/CAGE, 120V, WIRE LEADS
Part No. PD127808
$269.04- Igniter
- w/Cage
- 120V
- 2.5-3A
- 3-1/2 long
- wire leads
- Old style
- Commonly used on various BLODGETT models such as: DFG-50 (After 4/1/86),DFG50, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10 and where part is applicable.
-
Ignitor, Electric
Part No. PD128103
$249.57- Ignitor
- Electric 115V
- 2-3/4" long
- 15" wire leads
- 1 lead has a female push on, the other wire is bare.
- Commonly used on Blodgett models such as DFG-100, DFG-200 and where part is applicable
-
IGNITOR, HOT SURFACE
Part No. PD127718
$324.80- Ignitor, hot surface
- Commonly used on various BLODGETT models such as: ST-300 AA, ST-300 AB and where part is applicable.
-
IGNITOR, ROD
Part No. PD5496
$67.11- Ignitor
- Commonly used on various BLODGETT models such as: AC-500 XCEL, DFG-100 XCEL, SHO-G, SHO SERIES, SHO-100G and where part is applicable.
-
IGNITOR,DIRECT SPARK MT1828
Part No. PD130486
$98.01- Ignitor
- Used on various Blodgett models such as ,MT1828G,MT1828G-CE and where part is applicable.
-
KIT MODULE REPLACE, MK111H
Part No. PD174041
$4,184.28- Module Kit Replacement
- Commonly used on various BLODGETT models such as: MARK V-III, MARK V-IIIH, MARK V-IIIHD and where part is applicable.
-
KIT, PILOT PRO GAS CE
Part No. PD840719
$323.91- Ignitor
- Pilot
- Pro gas CE
- Commonly used on Blodgett ovens such as DFG-100, DFG-200, DFG-50, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE-200-G and where applicable.
-
KIT, TIMING BOARD
Part No. PD174184
$1,371.75- Timing board kit
- Commonly used on various BLODGETT models such as: BCS-6, BCS-8DS, BCS-8E, BCS-8G, CNV-8E, CNV-8G, COS-101, COS-101S, COS-20E, COS-20G, COS-6, COS-8E, COS-8EDS, COS-8G, COS-8GDS and where part is applicable.
-
MEAT PROBE UPDATE KIT
Part No. PD174631
$2,548.80- Meat Probe Update Kit
- Commonly used on Blodgett models such as COS-101, COS-101NSF, COS-101S, COS-101SNSF, COS-201NSF, COS-20E, COS-20G, COS-20NSF and where part is applicable.
-
MEAT PROBE, DUAL SENSOR 6"
Part No. PD840724
$484.10- Meat Probe
- Dual
- 6"
- T Handle
- Used on various Blodgett models such as BC-20E, BC-20G, BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G, DFG-100, DFG-100 XCEL, DFG-200, HV-100E, HV-100G, HV-50E, HVH-100E, HVH-100G, MARK V XCEL SERIES, MARK V-100 XCEL and where part is applicable.
-
-
Module, Ignition Control 24V
Part No. PD46907
$489.00- Ignition Control
- 24V
- Natural or LP gas
- Fenwall brand (replaces Johnson Control)
- For use before 2-1-1986 on Blodgett: DFG50; DFG100, DFG200, DFG300 all after 2/1/86; AC-500, BC-14GDS, BC-20G, BC14G SERIES, BCS-8G, BCX-14, BCX-14G, BX-14, BX-14G, Blodgett, CNV-8G, CNVX-14, CNVX-14G, COS-20G, COS-20GDS, COS-8G, COS-8GDS, DFG-100, DFG-200, DFG-50, DFG-50 POPEYES, DFG100, DFG50, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE-100-G, ZEPHAIRE-200-G ZEPHAIRE G with solid state controls.
-
MODULE, INFINITE
Part No. PD174690
$3,943.56- Infinite module
- Commonly used on various Blodgett models such as: DFG-100, DFG100, DFG-200 and where part is applicable.
-
-
Pilot Asy Natural Gas
Part No. PD175206
$207.09- Pilot Assembly
- Natural Gas
- Commonly used on various BLODGETT models such as: BC-20G, BC-14GDS, BC14G OLD, BC14G SERIES, BC20G, BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G and where applicable.
-
PROBE
Part No. PD175495
$135.58- Probe
- Commonly used on various BLODGETT models such as: 100E-KLS, 100E-KLT, 10E-KTT, 12E-KTT, 20E-KLS, 20E-KLT, 20E-KTT, 30E-KLS, 30E-KLT, 40E-KLS, 40E-KLT, 60E-KLS, 60E-KLT, 6E-KTT, 80E-KLS, 80E-KLT, KPS-E100, KPS-E30, KPS-E40, KPS-E60, KPS-E80, KTG-10E, KTG-12E, KTG-6E and where part is applicable.
-
PROBE
Part No. PD175498
$521.27- Probe
- Commonly used on various BLODGETT models such as: 10E-KTT, 12E-KTT, 6E-KTT, KLT-12G and where part is applicable.
-
PROBE ASSEMBLY
Part No. PD19562
$414.18- Level probe assembly
- With gasket
- Commonly used on various BLODGETT models such as: BC-20E, BCS-6, BCS-8DS, BCS-8E, BCS-8G, CNV-8E, CNV-8G, COS-101, COS-101S, COS-20E, COS-20G, COS-6, COS-8E, COS-8EDS, COS-8G, COS-8GDS and where part is applicable.
-
-
Probe Thermistor 100K OHM
Part No. PD39244
$313.29- Commonly used on various BLODGETT models such as: BC-20G, BC14E, BC14G SERIES, CNV-14E, CNV-14G, CNV-8E, CNV-8G, COS-101, COS-101S, COS-20E, COS-20G, COS-6, COS-8E, COS-8EDS, COS-8G, COS-8GDS and where part is applicable.
-
PROBE, FLAME PILOT
Part No. PD18544
$35.13- Probe
- Commonly used on various BLODGETT models such as: MG-32, MG32S, MG3270, MT2136G, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE, SG2136E, SG2136G, SG3240E, SG3240G and where part is applicable.
-
PROBE, FLAME SENSING
Part No. PD127967
$35.40- Probe - Flame Sensing
- 1-1/4 " Long
- Commonly used on various BLODGETT models such as: BCS-8G, CNV-8G, COS-8G, COS-8GDS, DFG-100, DFG-200, DFG-50, DFG-50 POPEYES, DFG100, DFG50, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G, MG32S, MG3270, MT2136G, MT3255, MY3855G, MT3870 and where part is applicable.
-
PROBE, RTD
Part No. PD130467
$330.44- Temperature Probe
- 20"
- Commonly used on Blodgett models such as SG2136E, SG2136G and where part is applicable.
-
PROBE, RTD 1000 OHM 36"
Part No. PD175523
$373.47- Probe
- 1000 Ohms
- Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, DFG-50 POPEYES, CTB XCEL, CTBR XCEL, DFG-100-ES, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.
-
PROBE, RTD 1000 OHM KFC
Part No. PD41724
$329.22- Probe
- 1000 OHM
- Commonly used on various BLODGETT models such as: CTB, CTB XCEL, CTB POPEYES, CTB SERIES, CTB-AP, CTB1, CTBR, CTBR XCEL, CTBR POPEYES, CTBR-AP, CTB Burger King, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.
-
PROBE, TEMP (DUAL 4 WIRE)
Part No. PD11177
$298.51- Temperature Probe
- 4 wire
- Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP and where part is applicable.
-
Probe, Temperature
Part No. PD11297
$257.54- Probe, Temperature
- Commonly used on Blodgett models such as CTB, CTB Series, CTB-Series, CTB1, CTBR, DFG-100, DFG-200, DFG-50, DFG100, DFG50, Mark V, Mark V Series, Mark V Series and where part is applicable
-
PROBE, TEMPERATURE (SOLID STATE)
Part No. PD128279
$92.93- Temperature Probe
- Overall 36"
- Probe approximate 5"
- 31" wire leads
- Commonly used on various BLODGETT models such as: 1400, 1405, 1415, BDO-100-G-ES, BDO-G, Blodgett, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTB1, CTBR, CTBR POPEYES, CTBR-AP, CTBR-G, CTBR-GFB, DFG-100, DFG-200, DFG-50, DFG-300 (after 7/1/1986), KCO-25E, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE E, ZEPHAIRE G (with solid state controls), ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE 50E, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.
Note: Blodgett changed probe length to 2-3/8". This probe will work the same as old style 5" probe.
-
PROBE, TEMPERATURE FORMED
Part No. PD175533
$638.97- Probe
- Temperature formed
- Wire leads, 2
- Spade terminals
- Used on Blodgett model such as: DFG-50 and where part is applicable.
-
PROBE, TEMPERATURE SOLID STATE
Part No. PD128171
$130.98- Probe -Temperature (Solid State)
- 37" wire leads
- Stainless steel
- 1/4" female tab terminals
- 4" bulb
- 1000 OHM
- Commonly used on various BLODGETT models such as: 1400, 1401, 1405, 1411, 1415, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTB-Series, CTB1, CTBR, CTBR POPEYES, CTBR SERIES, CTBR WENDYS, CTBR-AP, CTBR-G, CTBR-GFB, DFG-100, DFG-200, DFG-50, MARK V, MARK V 111-H, MARK V 111-HD, MARK V 112-H, MARK V 112-HD, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-III, MARK V-IIIH, MARK V-IIIHD, Mark V-200 and only where part is applicable.
-
PROBE, TEMPERATURE W-LIT 1K RTS
Part No. PD840761
$95.58- Probe, Temperature With LIT 1K RTD
- Length: 36.5"
- Width: 0.25"
- Height: 0.25"
- Used on various Blodgett models such as DFG-100, DFG-200, MARK V Series, MARK V-100, MARK V-200, SHO-100G, SHO-G, Zephaire, ZEPHAIRE 240G PLUS, ZEPHAIRE E PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE-100-E, ZEPHAIRE-100-G, ZEPHAIRE-200-E, ZEPHAIRE-200-G and only where part is applicable.
-
PROBE, TEMPERATURE WITH BRACKET
Part No. PD127896
$275.98- Temperature Probe
- With bracket
- Commonly used on various BLODGETT models such as: MT21G (Computerized Units**), MT1828E, MT1828G, MT3855G, MT3870 and where part is applicable.
- Non-Computerized units use item PD140151.
-
PROBE, TEMPERATURE, RTD 500 OHM
Part No. PD41731
$535.43- Probe
- RTD
- 500 OHM
- T1648
- Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR WENDYS, CTBR-AP, DFG100, DFG-100, DFG-200, MT1820E and where part is applicable.
-
Probe, thermistor 100 K Ohm
Part No. PD11475
$295.59- Thermistor Probe
- 100 K Ohm
- Lead Length approximately 108"
- Commonly used on various BLODGETT models such as: AC-500, AC-500 XCEL and where part is applicable.
-
RETAINER, PROBE WIRE
Part No. PD175751
$270.81- Retainer, Probe wire
- Commonly used on various BLODGETT models such as: AC-500, AC-500 XCEL and where part is applicable.
-
SENSOR, INDUCTIVE PROXIMITY
Part No. PD175977
$261.08- Inductive Proximity Sensor
- Commonly used on various Blodgett models such as: BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G and where part is applicable.
-
TEMPERATURE PROBE
Part No. PD26266
$502.68- Temp Probe
- Commonly used on various BLODGETT models such as: MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.
-
THERMOCOUPLE, TWIN LEAD W/LIT
Part No. PD140151
$296.14- Twin Lead
- Commonly used on various BLODGETT models such as: MG-32, MG3270, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE and where part is applicable.