Conveyor Related Parts
-
ASSEMBLY,PICKUP SENSOR
Part No. PD134931
$200.06- Pickup Sensor Assembly
- Commonly used on various Blodgett conveyor ovens and where part is applicable
-
CHAIN, DRIVE #35 W/ MASTER LINK
Part No. PD128066
$162.65- Drive Chain w/Master Link
- Split belt and single belt models
- Commonly Used on various BLODGETT models such as: MG-32, MG3270, MT3240E, MT3240, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3870, SG3240E, SG3240G and where part is applicable.
-
CHAIN, ROLLER #35 PITCH N/D, BTF
Part No. PD132669
$49.03- Roller Chain
- #35 Pitch N/D
- Sold by the foot
- Commonly used on Blodgett models such as MT3240, MT3255, MT3855G, MT3870, SG3240E, SG3240G and where part is applicable.
-
Conveyor Drive Motor Kit, Blodgett
Part No. PD45764
$5,418.95Blodgett Universal Motor
- This motor replaces all previous drive motors on the models listed below
- Used for Motor Conversions from Old style and intermediate style motors.
- Kit includes sprockets and items required for any combination of single belt or split belt ovens
- 90 VDC
- 1.04A
- 53W
- Reducer Output 12.6 RPM 98.3 in-lbs
- 80:1 Ratio
- Used on various Blodgett models such as: BE3240, BG3240 Including Split Belt and Single Belt models where part is applicable.
-
KIT, DRIVE CHAIN W/MASTER LINK
Part No. PD44420
$73.78- Roller Chain
- #35 Pitch N/D
- Master Link included
- Commonly used on Blodgett models such as MT3240, MT3255, MT3855G, MT3870, SG3240E, SG3240G and where part is applicable.
-
LINK, MASTER #35 N/D
Part No. PD22737
$7.58- Master Link
- #35 pitch
- Commonly used on various Blodgett & Middleby models such as MT3240, MT3255, MT3855G, MT3870, PS200, SG3240E, SG3240G, PS200 TANDEM, PS200-R68, PS200VL, PS220-R68, PS220FS, PS220VL, PS224, PS224-R68, PS224VL, PS540E, PS540G and where part is applicable.
-
MODULE ASSY, CONTOL, SSD WO/L M1XL
Part No. PD174664
$4,850.69- Control Module Assembly
- SSD
- WO/L M1XL
- Commonly used on various Blodgett models such as B36D-HHH, BE3240, BE2130, BG2136, MARK V XCEL SERIES, MARK V XCEL, MARK V-100 XCEL, S1820 and where part is applicable.
-
PAN, CRUMB IDLE SIDE
Part No. PD130704
$144.19- Used on various Blodgett models such as MT1820E, MT1828E, MT1828G, and where part is applicable.
-
PULLEY, 3.5A x 7/8"
Part No. PD175565
$155.76- Pulley
- Reworked
- with set screw
- Commonly used on various BLODGETT models such as: XR8E, XR8G and where part is applicable.
-
SPROCKET, CONVEYOR BELT, 11T 3/4"
Part No. PD128190
$32.37- Sprocket, Conveyor Belt
- 11 Teeth
- 3/4" bore
- Commonly used on various BLODGETT models such as: MT2136E, MT2136G, MT3855G, MT3870 and where part is applicable.
-
SPROCKET, CONVEYOR DRIVE
Part No. PD128201
$61.60- Conveyor Drive Sprocket
- 15 Teeth
- 3/4" bore
- 2 set screws
- Commonly used on various Blodgett models such as MG32, MG3270, MT3255, MT3855G, MT3855G, MT3870, SG3240E, SG3240G and where part is applicable.
-
SPROCKET, MOTOR DRIVE, 12T
Part No. PD128165
$52.70- Conveyor Motor Drive Sprocket
- 12 Teeth
- 1/2' bore
- #32
- Commonly Used on various BLODGETT models such as: MG-32, MG3270, MT2136E, MT2136G, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
-
TIMING BELT
Part No. PD130755
$66.10- Timing Belt
- Commonly used on various BLODGETT models such as: MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE and where part is applicable.
-
TIMING BELT
Part No. PD18613.24
$48.72- Blodgett Timing Belt
- 20" x 3/8" wide
- Pitch .200
- Commonly Used on various Blodgett models such as: MT1820E and where part is applicable.
-
WELDMENT, CONVEYOR COVER
Part No. PD131193
$100.84- Tunnel Extension-Cover
- Stainless Steel
- 22 x 6"
- Commonly used on Blodgett models such as MT2136E, MT2136G and where part is applicable.
-
-
Wire Belt - S/S (Priced Per Ft)
Part No. PD128164
$103.55- Wire Conveyor Belt
- Stainless Steel
- Priced Per Ft
- 38" wide
- Use for various Blodgett model such as MT3870, MT3855, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
NOTE: For the MT3870 unit take 18 feet.
For the MT3855 unit takes 16 feet