Cabinet; Panels, Racks, Stones, Flues
-
ACCESS PANEL
Part No. PD175156
$62.98- Vented access panel
- Used on various Blodgett models such as: DFG-100, DFG-200, SHO, SHO SERIES, SHO-100G, SHO-G, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.
-
ASSY, PANEL & DECAL, CONTROL
Part No. PD175108
$546.93- Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP and where part is applicable.
-
BACK PANEL, S/S, OUTSIDE
Part No. PD20825.1
$1,342.55- Back Sheet
- Stainless Steel
- Outside
- Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.
-
BACK, BODY
Part No. PD131145
$224.84- Commonly Used on various BLODGETT models such as: MG-32, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE and where part is applicable.
-
BAFFLE KIT, W/BRACKETS
Part No. PD41247
$421.26- Baking compartment
- Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-50, DFG-50 POPEYES and where part is applicable.
-
BAKING DECK STONE 1-1/2 x 30-3/8" x 21"
Part No. PD34105.46
$2,745.27- Baking Deck (Stone)
- There are two 21" long stones to make up the 42" oven cavity length.
- You will need to order 2 stones
- Commonly used on Blodgett models: 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, L900, S900 and where part is applicable.
- Sold by the each
- Ships common carrier
-
Baking Stone, ROKITE ULTRA 1060, Set
Part No. PD172316
$4,226.76- Baking Deck Stones
- Rokite material
- One Set
- 3 stones
- 1-1/2" x 24" x 36" two each
- 1-1/2 x 12" x 36" one each
- Used on various Blodgett models such as 1060 series, 1060BL and where part is applicable.
-
BODY PANEL, LH
Part No. PD45217
$300.90- Side panel
- Left SIde
- Commonly used on various BLODGETT models such as BDO-100-E, BDO-100-G-ES, BDO-100E, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, MARK V XCEL SERIES, MARK V Xcel, Mark V-100 XCEL, SHO, SHO Series, SHO-100-E, SHO-100-G, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE E PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE-100-E, ZEPHAIRE-100-G, ZEPHAIRE-100-G-ES, ZEPHAIRE-200-E, ZEPHAIRE-200-G, ZEPHAIRE-200-G-ES, ZEPHAIRE-240G PLUS, ZEPHAIRE-E PLUS, ZEPHAIRE-G, Zephaire 240E Plus, Zephaire 240G Plus, Zephaire E, Zephaire-E, Zephaire-G Plus and only where part is applicable.
-
BODYSIDE KIT
Part No. PD38104
$418.61- Bodyside
- Measurements:
- Length 16.13"
- Width 29.75"
- Height .75"
- Commonly used on various Blodgett models such as DFG-50, DFG-50 Popeyes and where part is applicable.
-
BOXED BACKSHEET, DECORATIVE
Part No. PD45245
$612.89- Backsheet
- Boxed
- Decorative
- Open at top and bottom
- Will significantly protect the confection motor from intake of harmful substances
- Commonly used on various Blodgett models such as BDO-100-E, SHO-100E, SHO-100G, SHO-E, SHO-G and where part is applicable.
-
COMBUSTION COMPARTMENT SHIELD
Part No. PD10748
$355.77- Combustion Compartment Shield
- Insulation assembly
- Commonly used on various BLODGETT models such as: FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10 and where part is applicable.
-
CONV LOCKING BAR TRANSPORT CRT
Part No. PD44615
$131.87- Locking Bar, Transport Cart
- Used on various Blodgett models such as:
- models: DFG-100, Zephaire 240E Plus, Zephaire 240G Plus, Zephaire E, Zephaire G, Zephaire G Plus and where part is applicable.
- series: MARK V Series and where part is applicable.
-
COVER ASSY, COMB COMP S/S
Part No. PD172260
$342.50- Cover Assembly
- Combustion compartment
- Stainless steel
- Commonly used on Blodgett models such as DFG-100 XCEL, ZEPHAIRE E, ZEPHAIRE E PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIREG PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.
-
COVER ASSY, COMB COMP S/S RHDR
Part No. PD172261
$779.69- Cover Assembly
- Combustion compartment
- Stainless steel
- RHDR
- Commonly used on models such as DFG-50, DFG-50 POPEYES and where part is applicable.
-
COVER ASSY, COMBUSTION COMP
Part No. PD172263
$119.30- Cover Assembly
- Combustion compartment
- Used on Blodgett models AC-500 where part is applicable.
-
-
COVER ASSY, FLUE ALCT
Part No. PD172269
$190.28- Flue ALCT cover Assembly
- Commonly used on Blodgett model such as 999, 1000 and where part is applicable.
-
COVER COMP COVER W/DECAL
Part No. PD38215
$255.77- Louvered cover panel with decal
- 38" x 6-1/2" x 3-3/4"
- Commonly used on various BLODGETT models such as: DFG-100, DFG-200, SHO SERIES, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE 100G and where part is applicable.
-
COVER, BOTTOM FRONT SH1G
Part No. PD47090
$310.64- Burner Cover
- Front bottom
- Commonly used on Blodgett models such as SHO-E, SHO-G and where part is applicable.
-
Cover, Combustion Compartment DFG
Part No. PD61712
$255.77- Combustion Compartment Cover
- Includes Decal
- Commonly used on various BLODGETT models such as: DFG-100, DFG-200, SHO SERIES, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE 100G and where part is applicable.
-
COVER, LAMP INTERIOR S/S
Part No. PD172297
$38.20- Cover, Lamp Interior S/S
- Commonly used on Blodgett models such as DFG-100, DFG-200 and where part is applicable.
-
COVER, LOWER FRONT
Part No. PD172301
$209.75- Commonly used on various BLODGETT models such as: BDO-100G-ES, DFG-100 XCEL, DFG-100-ES, MARK V XCEL, MARK V-100 XCEL, SHO-100E, SHO-E, ZEPHAIRE 240E PLUS, ZEPHAIRE 100E, ZEPHAIRE 200E, ZEPHAIRE 100G ES and where part is applicable.
-
-
DAM, LINER BOTTOM, HA D/M1XL
Part No. PD172343
$143.37- Dam Liner
- Bottom
- Humidaire component
- D/M1XL
- Commonly used on various BLODGETT models such as: DFG-100 XCEL, MARK V XCEL SERIES, MARK V XCEL, MARK V-100 XCEL and where part is applicable.
-
Deck Assembly, Steel L-900
Part No. PD37272
$1,422.20- standard with 115v, 60 cycle, single electriclal system cord and plug are supplied.
- Commonly used on various BLODGETT models such as: 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, L900, S900 and where part is applicable.
-
-
DECK SEAL (CRUMBCATCHER)
Part No. PD33913.24
$405.33- Deck Seal (crumb catcher)
- 58-5/8" x 4-5'8"
- Stainless steel
- with 3 each square notches
- Commonly used on various Blodgett models such as 1048, 1060 and only where part is applicable.
-
DECK STONE 1-1/2 x 20-3/8 x 33-1/8
Part No. PD42343
$2,236.40- This is a single baking deck stone
- 1-1/2" x 20-38" x 33-1/2 "
- Use on various Blodgett models: 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, L900, S900 and where part is applicable.
-
DECK STONE, CORDERITE, INSPECTED 1400
Part No. PD81306
$414.18- Oven Deck Stone
- Corderite
- 19-1/2" x 19-1/2" x 3/4"
- Used on various Blodgett models such as 1405, 1415 and where part is applicable.
Note: crating charges may apply
-
DECK, STEEL 3-PC 1060
Part No. PD172452
$2,010.72- Steel Deck Shelf
- Goes inside oven cavity
- 33" L x 41" W x 10" H
- 3 pieces
- (Limited supply)
- Commonly used on various Blodgett models such as: 1060 series and only where part is applicable.
Non returnable. Call us if you're unsure about this being the correct piece for you model.
-
Deflector Center Panel Large
Part No. PD29121
$721.28- Deflector Center Panel
- 20W x 30-1/2L
- 28L without lips
- 1.488" thick
- Aluminized steel
- Ribs face down
- Use on various Blodgett models such as: 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981 (Large Roast/Bake Ovens) and where part is applicable.
-
DELIMING BOTTLE ASSY,HAND PUMP
Part No. PD53999
$464.63- Deliming Bottle pump assembly
- Used on various Blodgett models such as COS-5HA with serial number containing letter code JR
-
DELIMING BOTTLE ASSY,HAND PUMP
Part No. PD172473
$506.22- Deliming Bottle pump assembly
- Used on various Blodgett models such as COS series Prior to 2005
-
DIVERTER, AIR INLET LEFT
Part No. PD131212
$1,437.88- Air Inlet Diverter
- Left
- Commonly used on various BLODGETT models such as: MG3270, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270E, MT3270-CE and where part is applicable.
-
DRAFT DIVERTER KIT, S/S DFG-50
Part No. PD174169
$408.87- Draft Diverter
- Stainless steel
- Kit
- Commonly used on various Blodgett models such as: DFG-50, DFG-50 POPEYES and where part is applicable.
-
DRAFT DIVERTER, CANOPY SS
Part No. PD27415
$497.37- Draft Converter
- Stainless steel
- Canopy vent
- Commonly used on various BLODGETT models such as: 1000, 1048DD, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, AC-500, AC-500 XCEL, DFG-100, DFG-100 XCEL, DFG-200, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, L900, MARK V XCEL SERIES, MARK V XCEL, MARK V-100 XCEL, S900, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.
-
DRAFT DIVERTER, SS
Part No. PD30923
$70.80- Draft Diverter
- Stainless steel
- Commonly used on various Blodgett models such as: 999, 1000, 100DS-KLT, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 20DS-KLT, 20DS-KPT, 30DS-KLT, 30DS-KPT, 40DS-KLT, 40DS-KPT, 60DS-KLT, 60DS-KPT, 80DS-KLT, 80DS-KPT and where part is applicable.
-
Draft Hood Kit, Stainless Steel
Part No. PD38524
$497.37- Draft Hood Kit
- Stainless Steel
- For stacked units only one is required. For single units you'll need one for each oven.
- Commonly used on Blodgett models such as DFG-50, DFG-50 POPEYES and where part is applicable.
-
DRAFT HOOD, DIRECT VENT 1000
Part No. PD28241
$490.29- Draft Hood - Direct Vent
- Stainless Steel
- 12" x 24" with 10" round take-off
- 24" x 3" inlet
- 20-1/2" high
- Use on various Blodgett models such as: 999, 1000, 1048, 1060 and where part is applicable.
-
DRAFT HOOD, DIRECT VENT 6" DIA
Part No. PD28908
$497.37- Drafthood
- Direct Vent
- 16" length x 12" width x 7" height
- 6" round connection
- Metal
- Used on various Blodgett models such as 1000, 1048DD, 901, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, AC - 500 XCEL, AC -500, AC-500, AC-500 XCEL, DFG-100, DFG-100 XCEL, DFG-200, EF SERIES, EF-111, EF-111-RHT, EF-112, EZE, EZE SERIES, EZE-1, EZE-1-RHT, EZE-2, L900, S900, SHO, SHO Series, SHO-100-G, SHO-100G, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE-100-G, ZEPHAIRE-200-G, ZEPHAIRE-240G PLUS, ZEPHAIRE-G, Zephaire 240G Plus, Zephaire-G Plus and only where part is applicable.
-
DRAFTHOOD, DOUBLE 8"
Part No. PD172651
$497.37- Drafthood, Double DFG200, ZEPHG.
- 8"
- Fits models DFG -100, DFG - 100 XCEL, DFG - 200, ST - 300 AA, ST - 300 AB, Zephaire G, Zephaire G Plus and where part is applicable.
-
Flue Box Assembly, Single Oven
Part No. PD174511
$138.06- Flue Box Assembly
- For Single Oven
- 24" x 4-3/16"x 4-5/8"
- Commonly used on various BLODGETT models such as: DFG-100, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G and where part is applicable.
-
-
FLUE BOX ASSY, SINGLE BOX SHE/G
Part No. PD173108
$234.53- Commonly used on various BLODGETT models such as: SHO SERIES, SHO-100G, SHO-G and where part is applicable.
-
-
FLUE CONNECTOR
Part No. PD11210
$903.59- Flue Connector
- 4 pieces
- Commonly used on various BLODGETT models such as: DFG-50, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, EF SERIES, EF-111 and where part is applicable.
-
FLUE CONNECTOR 24"
Part No. PD50013
$235.41- Flu Connector
- 24 x 2 x 7-1/4' high
- Galvanized steel
- 24-3/8: screw centers on tabs
- Used for double stacking ovens
- Commonly used on various BLODGETT models such as: 1000, 1048, 1060, 999 and where part is applicable.
-
FLUE PLATE 951
Part No. PD173139
$712.43- Flue Plate
- Commonly used on various BLODGETT models such as: 901, 911, 911P, 916, 931, 951, 961, 966, 981, 961P, L900, S900 and where part is applicable.
-
FLUE PLATE ASSEMBLY- LF HAND
Part No. PD31375
$310.64- Commonly used on various BLODGETT models such as: 1000, 1048, 1060, 999, 1048B, 1048B-CE, 1048BL, 1048BL-CE and where part is applicable.
-
FLUE PLATE ASSEMBLY- RT HAND
Part No. PD31376
$314.18- Right hand flue plate assembly
- Used on various Blodgett ovens such as 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 999 and where part is applicable.
- 36-1/4" x 5" x 1/2"
-
FLUE PLATE RH 931
Part No. PD173148
$893.85- Flue Plate
- Right hand
- Commonly Used on various BLODGETT models such as: 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, L900, S900 and where part is applicable.
-
Flue Plate, Right Hand
Part No. PD173146
$551.36- Commonly used on various BLODGETT models such as: 911, 911P and where part is applicable.
-
-
INSULATION COVER RH 999, 1000
Part No. PD173966
$366.39- Insulation Cover
- Right hand
- Commonly used on Blodgett models such as 999, 1000, 1060 and where part is applicable.
-
INSULATION, 34" X 22.5"
Part No. PD173973
$314.18- Insulation
- 34" x 22-1/2"
- Commonly used on Blodgett models such as and where part is applicable.
-
INSULATION, PIPE 1/2"
Part No. PD173993
$27.14- Pipe Insulation
- 1/2"
- Commonly used on various BLODGETT models such as: COS-5H, COS-5HB and where part is applicable.
-
-
KIT, BAFFLE & FILTER
Part No. PD174063
$1,062.89- Baffle and Filter Kit
- Commonly used on various BLODGETT models such as: COS-101, COS-101NSF, COS-101S and where part is applicable.
-
KIT, BODYSIDE CTB1
Part No. PD174072
$375.24- Bodyside Kit
- Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTBR, CTBR POPEYES, CTBR-AP and where part is applicable.
-
-
LINER BAFFLE & GUARD ASSY, ALCT
Part No. PD174464
$323.91- Liner Baffle
- with guard assembly
- ACLT
- Commonly used on various BLODGETT models such as: ZEPHAIRE E, ZEPHAIRE 200E and where part is applicable.
-
LINER BAFFLE & GUARD ASSY, POR
Part No. PD174461
$575.25- Commonly used on various BLODGETT models such as: DFG-100, DFG-200, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE 100G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.
-
LINER BAFFLE & GUARD ASSY, S/S
Part No. PD174462
$1,092.09- Liner Baffle & Guard Assembly
- Stainless steel
- Commonly used on various Blodgett models such as EF Series, EF-111, EZE Series, MARK V, MARK V KFC, MARK V Series, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD, RE Series and where part is applicable.
-
LINER BAFFLE ASSY, LH (JAPAN)
Part No. PD174467
$754.02- Liner Baffle Assembly (Japan)
- Left Hand
- Commonly used on various BLODGETT models such as: ZEPHAIRE 50E and where part is applicable.
-
LINER BAFFLE ASSY, S/S
Part No. PD174470
$116.27- Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB WENDYS, CTB-AP, CTBR, CTBR POPEYES, CTBR-AP and where part is applicable.
-
LINER BAFFLE ASSY, S/S
Part No. PD174474
$1,234.58- Liner Baffle Assembly
- Stainless steel
- Commonly used on various BLODGETT models such as: COS-20, COS-20E, COS-20G, COS-20NSF and where part is applicable.
-
LINER BAFFLE GUARD ASSEMBLY PORCELAIN
Part No. PD174477
$421.26- Liner Baffle guard Assembly
- Porcelain Cover
- (covers blower wheel )
- Commonly used on various BLODGETT models such as: DFG-50, EF SERIES, EF-111, EZE SERIES, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD, RE SERIES, SHO-100E, SHO-E, ZEPHAIRE 240E PLUS, ZEPHAIRE E, ZEPHAIRE 100E, ZEPHAIRE 200E and where part is applicable.
-
LINER BOTOM ASSY, ZEPH PORC.
Part No. PD174479
$676.14- Liner Bottom Assembly
- Porcelain
- Commonly used on various BLODGETT models such as: ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.
-
LINER BOTTOM, S/S DFG-1
Part No. PD174490
$529.34- Liner Bottom
- Stainless steel
- Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.
-
LINER BOTTOM, S/S MARK V/DFG
Part No. PD174491
$493.83- Liner Bottom
- Stainless steel
- Commonly used on various BLODGETT models such as: DFG-100, MARK V, MARK V SERIES, MARK V-IIIH, MARK V-IIIHD and where part is applicable.
-
LINER BOTTOM, ZEPH
Part No. PD174492
$346.82- Liner Bottom
- Commonly used on Blodgett models such as ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE-200-E, ZEPHAIRE-200-G and where part is applicable.
-
-
OVEN RACK, 26.5" x 22.5"
Part No. PD57104
$705.35- Oven Rack
- Wire
- 26.5" x 22.5"
- Commonly used on Blodgett cafe range models such as BR12GT436 and where part is applicable.
-
OVEN STONES (2 PCS) 24" x 36"
Part No. PD31191.46
$3,440.88- Commonly used on Blodgett models such as 999, 1000, 1048, 1048B, 1048DD, 1048B-CE, 1048BL, 1048BL-CE and where part is applicable.
-
Panel, Gas Valve Cover
Part No. PD53131
$87.60- Stainless Steel Panel that covers gas manifold at knobs
- Provide model and serial
- Used on various Blodgett Models Such As B24C-CC only
-
Panel, LEFT Side
Part No. PD53128
$106.26- LEFT Body Side Panel
- Ships oversize and handling may apply
- Provide model and serial
- Used on various Blodgett Models Such As B36CBBB only
-
PANEL, REMOVEABLE ACCESS S/S
Part No. PD175190
$258.42- Removable Access Panel
- Stainless steel
- Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTBR, CTBR POPEYES, CTBR-AP and where part is applicable.
-
PROBE, K 1048DD, Dunkin Donuts
Part No. PD175513
$421.26- Use for Dunkin' Donuts Gas Deck Oven
- Probe
- K 1048DD
- Maybe be discontinued, Limited supply.
- Commonly used on various BLODGETT models such as 1048DD and where part is applicable.
-
RACK SUPPORT SET OF (2)
Part No. PD35230.1
$324.80- Rack Support
- Oven wire shelves slide into these supports which mount on the side walls inside the oven cavity.
- Comes as a set of 2
- Commonly used on various Blodgett models such as: DFG-200, MARK V-IIIH, RE Series (after 9/91), ZEPHAIRE E, ZEPHAIRE G and where part is applicable.
-
RACK SUPPORT SET OF 2
Part No. PD50355
$322.14- Wire Oven Rack Supports
- Sold as a set of two
- Used for right or left hand side
- Commonly used on Blodgett models such as DFG-100 (after 9/86), MARK V (after 9/15/86), MARK V KFC (after 9/15/86), MARK V-IIIHD, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, and where part is applicable.